2 layers107.3 × 82.8 mm
Open-source KiCad boards
7 match “jvanderberg”Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
- 4 layers82.1 × 21 mm
Pico stretch2
jvanderberg/pico-stretch2
An RP2350B dev board that breaks out all 48 GPIO pins while following the original Raspberry Pi Pico footprint for the first 20 pins on each side.
70 parts2 - 4 layers44.3 × 31 mm
3v3-charger psu
jvanderberg/3v3-charger-psu
USB-C 1S Li-ion charger and dual 3.3V/5V power module for embedded projects
63 parts1 - 4 layers52 × 36 mm
Minipc power
jvanderberg/minipc-power
Small power board for MCU-based emulator builds (Pico / ESP32 class with a 12 V 5" LCD). Runs from USB-C or a 1S2P 18650 pack, charges the pack whenever USB-C is plugged in, and supplies 12 V, 5 V and 3.3 V.
106 parts - 10 layers
Webench d33
jvanderberg/minipc-power
Small power board for MCU-based emulator builds (Pico / ESP32 class with a 12 V 5" LCD). Runs from USB-C or a 1S2P 18650 pack, charges the pack whenever USB-C is plugged in, and supplies 12 V, 5 V and 3.3 V.
24 parts - 10 layers110.8 × 90.2 mm
Webench d35-view
jvanderberg/minipc-power
Small power board for MCU-based emulator builds (Pico / ESP32 class with a 12 V 5" LCD). Runs from USB-C or a 1S2P 18650 pack, charges the pack whenever USB-C is plugged in, and supplies 12 V, 5 V and 3.3 V.
24 parts - 10 layers
Webench d36
jvanderberg/minipc-power
Small power board for MCU-based emulator builds (Pico / ESP32 class with a 12 V 5" LCD). Runs from USB-C or a 1S2P 18650 pack, charges the pack whenever USB-C is plugged in, and supplies 12 V, 5 V and 3.3 V.
14 parts