2 layers54.5 × 100 mm
PendantPcb
Jay-Tech/WirelessPendant
Firmware for a wireless handwheel pendant for a grblHAL machine, and for the receiver board that carries it to the PC.
11 parts
Open-source KiCad boards
6 match “Jay-Tech”Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
- 2 layers150 × 115 mm
Shop output board
Jay-Tech/GrblHAL-Sender
8-channel opto-isolated high-side switch board, driven by a Raspberry Pi Pico over USB-C. Takes a 5–24 V field supply and sources it to screw terminals, so shop wiring carries a robust signal instead of 3.3 V logic.
84 parts8 - 2 layers70 × 92 mm
Shop output board v2
Jay-Tech/GrblHAL-Sender
8-channel opto-isolated high-side switch board, driven by a Raspberry Pi Pico over USB-C. Takes a 5–24 V field supply and sources it to screw terminals, so shop wiring carries a robust signal instead of 3.3 V logic.
47 parts8 - 4 layers68 × 53.1 mm
STM32 and GPS Technology PCB
JayTzw/Mechanical---Robotics---Electronics
CAD files, Circuit schematics & PCB designs, Robotics simulations
66 parts - 2 layers
STM32 and GPS Technology PCB
JayTzw/Mechanical---Robotics---Electronics
CAD files, Circuit schematics & PCB designs, Robotics simulations
59 parts - 2 layers114.5 × 66.5 mm
ReactiveLED PCB
jayjgurung/CulminationProject-Part2-ENT4501-WearableTechLedSound
This Repo holds content of my on going project that aim to build a custom built Wearable Technology that incorporated sensors, electronics and physical computing elements, and all documents related to the project.
14 parts