Skip to the content

Open-source KiCad boards

13 match “Generic 3 mm LED”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers100 × 100 mmStrobe HMI, the printed circuit board in 3D

    Strobe HMI

    FLRHW/Strobe_HMI

    While defining the project scope, I had to decide if I'd use the good old Xenon bulb or move to LEDs, as these have greatly evolved and are ubiquitous nowadays, making their way to commercial strobes…

    91 parts
  • 4 layers86 × 90 mmSc02 drive, the printed circuit board in 3D

    Sc02 drive

    KVR-CIBER/sc02-solar-hypercar

    SC-02 Solar Hypercar: 3D-printbare Le-Mans-racer op zonne-energie met Pi 4 + ESP32-S3, CadQuery-CAD en three.js-simulatie

    94 parts
  • 4 layers100 × 83 mmModule17-Mainboard, the printed circuit board in 3D

    Module17-Mainboard

    M17-Project/Module_17

    M17 modem board for 9600-baud capable radios

    209 parts129CERN-OHL-W-2.0
  • 2 layers56 × 70 mmCFS Bus Adapter R2, the printed circuit board in 3D

    CFS Bus Adapter R2

    fake-name/cfs-reverse-engineering

    Reverse engineering the Creality CFS for use as a general AMU/MMU system

    66 parts58
  • 4 layers75 × 50 mmSgm modem, the printed circuit board in 3D

    Sgm modem

    ebixs/smart-gas-meter-iot

    The board plugs onto the carrier board's modem header J6 (carrier v0.2, hardware/kicad/) with a socket J1 on its underside, pin for pin: 1 MODEMVIN · 2 GND · 3 MODEMTXD · 4 MODEMRXD · 5 MODEMEN · 6 MODEMRESET · 7…

    57 parts
  • 2 layers263.3 × 128 mmKIKAD, the printed circuit board in 3D

    KIKAD

    MUBARIS-KT/DC-DC_CONVERTER

    This project provides the complete design and code for a DC to DC converter that steps up 12V DC to 300V DC. The project is a comprehensive solution in power electronics, including PCB design, STM32 code for PWM…

    133 parts
  • 2 layers115 × 72 mmFcmlPanel, the printed circuit board in 3D

    FcmlPanel

    BerkeleyHCI/PolymorphicBlocks

    A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.

    246 parts94BSD-3-Clause
  • 2 layers40 × 60 mmCFS Bus Adapter R1, the printed circuit board in 3D

    CFS Bus Adapter R1

    fake-name/cfs-reverse-engineering

    Reverse engineering the Creality CFS for use as a general AMU/MMU system

    46 parts58
  • 2 layers24 × 84.5 mmLhc tijolo32 board, the printed circuit board in 3D

    Lhc tijolo32 board

    lhc/Hardware

    Open Hardware respository from Laboratório Hacker de Campinas

    50 parts6
  • 4 layers58 × 61.1 mmPower supply, the printed circuit board in 3D

    Power supply

    matthieuvigne/MiAM_robotics

    Generic repo for robotic projects with the former MiAM Eurobot team !

    83 parts5GPL-3.0
  • 4 layers68.5 × 53.3 mmDMM Feather Specific, the printed circuit board in 3D

    DMM Feather Specific

    oihdesigns/Micro-DMM

    A small, open hardware DMM

    57 parts2