2 layers17.8 × 11.4 mm
Open-source KiCad boards
68 match “BUILDS-”Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
- 2 layers60 × 40 mm
Tracking system
martins-builds/embedded-gps-gsm-tracker
Custom GPS/GSM embedded tracking system with custom PCB, firmware, OLED display, and Web dashboard
48 parts1 - 2 layers100 × 98.8 mm
Starbie week one
Eniola-Builds14/Starbie
Starbie is a little robot pet with a star shaped PCB. It was designed using KICAD .I had alot of fun while building it and I learned new things along the way.
8 parts - 2 layers98 × 79.5 mm
Flex over can
twisted-builds-llc/sloppy_holley_flex-over-can
CAN bus input/output module for Holley Terminator X (also HP/Dominator class ECUs).
86 parts1 - 2 layers65 × 56 mm
PiGarage
bryce-builds/PiGarage
Open-source Raspberry Pi power management and audio HAT for automotive head-unit use
79 parts9 - 2 layers90 × 130 mm
- 2 layers44.5 × 99.1 mm
- 2 layers17 × 32.1 mm
Bidirectional level shifters
robertrico/hardware
Personal embedded systems portfolio — circuits, firmware, and physical builds. Each project showcases a hardware concept, toolchain, or interface.
6 parts1 - 2 layers
Layouts
m9h/ato-qcm-monitor
Vacuum QCM deposition-rate monitor (openQCM NEXT method: Teensy 4.1 + AD9851 + AD8302) for Hacker Fab sputter chambers, written in atopile; builds offline.
69 partsMIT - 2 layers58 × 104 mm
AT89S52
robertrico/hardware
Personal embedded systems portfolio — circuits, firmware, and physical builds. Each project showcases a hardware concept, toolchain, or interface.
21 parts1 - 2 layers115.5 × 95 mm
Wave pcb
etiennecollin/wave
A small, minimalist and reversible elite-c based split keyboard that builds on previous designs to fit your needs.
28 parts40GPL-3.0 - 2 layers30 × 84 mm
DaisySeed
cuteboy0323/1590A
These are not at all useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch.
7 partsGPL-2.0 - 2 layers86.4 × 91.4 mm
LightPanel
Kitsune-Robotics/RackDistribution-4U
This repo contains all the firmware and hardware for the RackDistribution-4U. If you're looking for the latest docs/builds, see our Releases Page.
25 parts1BSD-2-Clause - 2 layers56.6 × 48.6 mm
Water Alarm
ANSHAD134/PCB-Files
A collection of my personal KiCad PCB design projects, custom symbol/footprint libraries, and 3D models used across different electronics builds.
8 parts - 2 layers25 × 35 mm
LPB
OriginalGoodUsername/guitar-effects-pedal-pcbs
KiCad files and build notes for Boss DS-1, Big Muff Pi, and EHX LPB-1 through-hole pedal builds, with source credits and file status.
11 parts1 - 2 layers30 × 62 mm
Fuzzy
cuteboy0323/1590A
These are not at all useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch.
13 partsGPL-2.0 - 2 layers59.9 × 99.7 mm
Office Automation
theaparnaprabhu/Applied-Projects
Applied, hands-on projects that go beyond quick learning exercises — real builds combining hardware, firmware, and design.
31 parts - 2 layers78 × 44.9 mm
Can crusher pi hat
grant-olson/can-crusher
Overly elaborate aluminum can crusher product with all original cad, 3d-printing, pcb design and builds, and software and firmware needed to build it.
6 partsBSD-2-Clause - 2 layers43.7 × 48.8 mm
OW PDB
Heroj04/OneWheel-VESC-PDB
A simple PDB PCB for DIY VESC OneWheel builds. Using split battery packs and an Ennoid X-Lite BMS.
9 parts2MIT - 2 layers30 × 55 mm
Octaver
cuteboy0323/1590A
These are not at all useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch.
25 partsGPL-2.0 - 2 layers65.5 × 56.4 mm
Senior Capstone
achihuahua22/Alex-Harris-Capstone
This project builds on an-ven’s graspib project by adding more RS232 support and a UART breakout pin.
47 parts1MIT - 2 layers30 × 62 mm
Boost
cuteboy0323/1590A
These are not at all useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch.
23 partsGPL-2.0 - 2 layers55.7 × 48.7 mm
Amplifier
ANSHAD134/PCB-Files
A collection of my personal KiCad PCB design projects, custom symbol/footprint libraries, and 3D models used across different electronics builds.
20 parts - 2 layers49.8 × 24 mm
Single piece
bananacocodrilo/BananaBoard-hardware
Keyoard PCB based on the mitosis and chimera builds. It uses a Core51822 as mcu, has a mini-usb battery charger and underglow with WS2812b leds
19 parts4GPL-3.0