Skip to the content
2 layers17 × 32.1 mmBidirectional level shifters, the printed circuit board in 3D

Bidirectional level shifters

robertrico/hardware1

Personal embedded systems portfolio — circuits, firmware, and physical builds. Each project showcases a hardware concept, toolchain, or interface.

Size
17 × 32.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
21
Pads
52
Tracks, vias
85, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
13 Apr 2025
Updated
6 Nov 2026

Overview

Bidirectional level shifters is an open-source printed circuit board by robertrico, from the robertrico/hardware repository on GitHub. It is a 2-layer board of 17 × 32.1 mm with 6 parts on 21 nets, routed with 85 tracks and 0 vias.

It is built around the SN74LVC8T245PW. Its parts include 2 capacitors, 2 connectors and 1 IC. It belongs with the interfaces and adapters boards of this library.

Main components

1

README

README.md

Embedded Systems Portfolio

Welcome to my Embedded Systems Portfolio. This document introduces several projects, highlighting their objectives, technologies, and current status.


LED Blinky Projects

Zephyr RTOS Blinky on Raspberry Pi Pico
  • Objective: GPIO control demonstration using Zephyr RTOS.
  • Technologies: Raspberry Pi Pico, Zephyr RTOS, DeviceTree.
  • Current Status: Complete.
FreeRTOS LED Blinky for Pico W, Pico W2, ESP32
  • Objective: Basic FreeRTOS demonstration with task scheduling and GPIO control.
  • Technologies: FreeRTOS, Raspberry Pi Pico W, Pico W2, ESP32.
  • Current Status: Complete

PicoBook

  • Objective: A compact device fetching and displaying book data via Wi-Fi.
  • Technologies: Raspberry Pi Pico W, MicroPython, OLED display, Wi-Fi.
  • Current Status: Complete.

Zephyr OS "Hello World" on Raspberry Pi Pico

  • Objective: Minimal Zephyr OS application printing to USB serial.
  • Technologies: Zephyr OS, RP2040.
  • Current Status: Complete

PicoW Over-The-Air (OTA) Firmware System

  • Objective: Dual-partition bootloader enabling OTA firmware updates.
  • Technologies: RP2040, pico-sdk, assembly, linker scripts.
  • Current Status: Complete - But inoperable. There were struggles with the bootloader and ROM and highlighted knowledge gaps. This work was the catalyst for a full re-understanding of low level work. Inspiring the DINO project.

ESP-NOW Remote Control Project

  • Objective: Wireless remote control for toggling LEDs using ESP-NOW protocol.
  • Technologies: ESP32-C3, ESP-IDF, ESP-NOW.
  • Current Status: Complete

The Earth Rover

  • Objective: Modular rover system using ESP-NOW and STM32 for real-time motor control and wireless ADC data transmission.
  • Technologies: ESP32-C3, STM32L432KC, ESP-NOW, FreeRTOS, STM32CubeMX, CMake, SPI, DMA, TB6612FNG, CD4053BE.
  • Current Status: Communication functional; currently refining SPI packetization and synchronization.

Dino (Discrete Integrated Numeric Operator) CPU

Dino v0.01 – Manual Logic Sequencer
  • Objective: CPU-free logic sequencer manually steps through memory and outputs 8-bit values via LEDs.
  • Technologies: SN74LS590N counters, 555 timer, SRAM, DIP switches, LEDs.
  • Current Status: In Progress. Schematic Phase.
Dino v0.1 – 8-bit CPU Core
  • Objective: Upgrade to a functional 8-bit CPU with ALU, registers, and basic arithmetic operations.
  • Technologies: 74F382N ALU, SN74LS273N registers, DM74LS374 latch.
  • Current Status: Planned
Dino v0.1.1 – Instruction Decoder & 7-Segment Display
  • Objective: Adds instruction decoding and output display.
  • Technologies: SN74LS138N decoder, 7-segment display drivers.
  • Current Status: Planned

Parts

6
QtyValueFootprintReferences
2C_SmallCapacitor_SMD:C_0603_1608MetricC1, C2
2Conn_01x12_SocketConnector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_VerticalJ1, J2
1LOGOfootprints:logo_smG***
1SN74LVC8T245footprints:DBQ24-LU1

More from robertrico/hardware

1
  • 2 layers58 × 104 mmAT89S52, the printed circuit board in 3D

    AT89S52

    robertrico/hardware

    Personal embedded systems portfolio — circuits, firmware, and physical builds. Each project showcases a hardware concept, toolchain, or interface.

    21 parts1

Similar boards

  • 2 layers98 × 38 mmBldc control ver3, the printed circuit board in 3D

    Bldc control ver3

    pekkaroi/bldc-drive

    Cheap and simple brushless DC motor driver designed for CNC applications using STM32 microcontroller

    68 parts199GPL-2.0
  • 4 layers51.4 × 60.6 mmGb rp2040 cart, the printed circuit board in 3D

    Gb rp2040 cart

    deltabeard/DBGC

    A Game Boy cartridge using the Raspberry Pi RP2040 with RTC and MBC support.

    67 parts57
  • 6 layers69.6 × 46.1 mmCarrier, the printed circuit board in 3D

    Carrier

    KaiPereira/CM5-SODIMM-Carrier

    A fully open source CM5 carrier to turn your Pi into a Jetson in compact SO-DIMM format!

    98 parts29
  • 2 layers91.3 × 53.3 mmTimep, the printed circuit board in 3D

    Timep

    Matir/timep

    Test Interface for Multiple Embedded Protocols

    89 parts25Apache-2.0
  • 2 layers99.8 × 46.4 mmOmniSCC+, the printed circuit board in 3D

    OmniSCC+

    RBSC/OmniSCC

    OmniSCC catridge for MSX

    29 parts23GPL-3.0
  • 2 layers187 × 152 mmKiss masterboard, the printed circuit board in 3D

    Kiss masterboard

    squarewavedot/ledcubeelectronics

    LEDCube battery and masterboard electronics

    163 parts22
  • 4 layers214 × 142 mmNextCuboid quilter, the printed circuit board in 3D

    NextCuboid quilter

    mattuna15/68881-fpga

    Development of coprocessor.

    27 parts19MIT
  • 4 layers58.5 × 85.5 mmSr jv esp32, the printed circuit board in 3D

    Sr jv esp32

    connorzheng97/srjv

    SR-JV80 Programmable Expansion Card with ESP32 Wi-Fi

    84 parts18

Questions

How big is the Bidirectional level shifters PCB?

It measures 17 × 32.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Bidirectional level shifters use?

6 parts, built around the SN74LVC8T245PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Bidirectional level shifters KiCad files?

From the robertrico/hardware repository on GitHub, at the commit this page was made from: the board is hardware_projects/bidirectional_level_shifters/bidirectional_level_shifters.kicad_pcb and its schematic earth_rover/receiver/design/schematics/receiver_schematic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Bidirectional level shifters design in my own project?

Its repository states no licence, so its author keeps all rights: ask robertrico before reusing the design.