Skip to the content

Open-source KiCad boards

107,410 boards

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers65 × 56 mmYato Control, the printed circuit board in 3D

    Yato Control

    Sir-Quickly/Yato_Control_Interface

    Interface PCB to enable exterbnal control of the Yato / Hendi Induction cooker

    19 parts4GPL-3.0
  • 2 layers68.8 × 53.3 mmMcu, the printed circuit board in 3D

    Mcu

    skiz/mcu

    4DOF Motor Control Unit

    49 parts4
  • 2 layers50.1 × 30.1 mmAntSniffer, the printed circuit board in 3D

    AntSniffer

    skot/AntSniffer

    This device is used to tap into the signals on an Antminer data cable for logic analyzers and other development purposes

    5 parts4MIT
  • 2 layers18 × 33.2 mmAtmega328pb nano, the printed circuit board in 3D

    Atmega328pb nano

    skumlos/atmega328pb-nano

    An Arduino Mini Pro clone using a Atmega328PB instead to have 2 I2C busses

    22 parts4
  • 2 layers106.7 × 101.1 mmBkm-129x, the printed circuit board in 3D

    Bkm-129x

    skumlos/bkm-129x-compatible

    Kicad project for a BKM-129X compatible board

    134 parts4
  • 4 layers123 × 56 mmSkyduino Hardware, the printed circuit board in 3D

    Skyduino Hardware

    Skyduino/Skyduino-Hardware

    Hardware design files for the Skyduino roaster

    80 parts4
  • 4 layers36 × 26 mmNina project, the printed circuit board in 3D

    Nina project

    slemanz/nina-project

    Integrated hardware and firmware solution for a data acquisition device based on the u-blox NINA-B306 (nRF52840) Open CPU.

    43 parts4MIT
  • 2 layers285.8 × 133.4 mmSegment 60 PCB, the printed circuit board in 3D

    Segment 60 PCB

    slonket/segment-keyboard

    A through-hole keyboard kit themed after PCB's of the 1980's.

    131 parts4MIT
  • 2 layers66 × 57 mmFlood hat, the printed circuit board in 3D

    Flood hat

    smart-facility/cognicity-floodsensor

    Cognicity flood sensor example code

    57 parts4GPL-3.0
  • 2 layers64.6 × 110 mmSensegate pcb, the printed circuit board in 3D

    Sensegate pcb

    smartuni/riot-po-2026

    Welcome to the primary repository of the RIOT im Internet of Things project for the Summer 2026 semester at HAW Hamburg.

    42 parts4
  • 2 layers100 × 40 mmEurorackBus, the printed circuit board in 3D

    EurorackBus

    smotesko/eurorack-power-bus

    Small Eurorack power distribution board. See blog posts tagged "power-kit" for details.

    12 parts4
  • 2 layers100 × 100 mmHackpad, the printed circuit board in 3D

    Hackpad

    snaeker58/Karls-Hackpad

    My submission for HC-Hackpad

    70 parts4Unlicense
  • 2 layers181 × 193 mm0.96 OLED, the printed circuit board in 3D

    0.96 OLED

    SolderedElectronics/Display-OLED-I2C-White-0.96-hardware-design

    Hardware design, BOM, gerbers and 3D files for Display-OLED-I2C-White-0.96 designed by Soldered Electronics.

    2,308 parts4
  • 2 layers177.4 × 202.8 mmGPIO Expander MCP23017, the printed circuit board in 3D

    GPIO Expander MCP23017

    SolderedElectronics/IO-expander-MCP23017-breakout-hardware-design

    Hardware design, BOM, gerbers and 3D files for IO-expander-MCP23017-breakout designed by Soldered Electronics.

    2,804 parts4
  • 2 layers130.6 × 162.5 mmSoldered Inkplate 5 Gen2 panel, the printed circuit board in 3D

    Soldered Inkplate 5 Gen2 panel

    SolderedElectronics/Soldered-Inkplate-5-Gen2-hardware-design

    Hardware design, BOM, gerbers and 3D files for Soldered-Inkplate-5-Gen2 designed by Soldered Electronics.

    694 parts4
  • 4 layers49.7 × 36.6 mmPierogiNixiePSU, the printed circuit board in 3D

    PierogiNixiePSU

    SonOfCheevap/PierogiNixie-PSU

    A simple 12v to 150v-250v DC-DC Power supply for use with nixie tubes.

    23 parts4MIT
  • 2 layers98 × 98 mmVCDO, the printed circuit board in 3D

    VCDO

    Sonosus/VCDO

    A Kosmo oscillator module that uses the Electric Druid VCDO chip.

    93 parts4CC-BY-SA-4.0
  • 2 layers68.6 × 38.1 mmFirst project, the printed circuit board in 3D

    First project

    soonick/ncona-code-samples

    Code samples for ncona.com

    3 parts4
  • 2 layers39.4 × 109.2 mmMiditron back, the printed circuit board in 3D

    Miditron back

    soundslikefrank/miditron

    midi2cv module best to be used with Elektron devices

    144 parts4
  • 4 layers73 × 41 mmBadge, the printed circuit board in 3D

    Badge

    souptik-samanta/Pcb-Badge

    63 parts4MIT
  • 2 layers58.8 × 60.2 mmPower drive, the printed circuit board in 3D

    Power drive

    SourceLizi/F302-minimal

    STM32F302硬件设计

    121 parts4MIT
  • 2 layers43.3 × 46.7 mmSpacehuhn badge, the printed circuit board in 3D

    Spacehuhn badge

    SpacehuhnTech/spacehuhn-badge-pcb

    The Spacehuhn badge project files

    11 parts4
  • 4 layers40 × 20 mmHdmi pmod, the printed circuit board in 3D

    Hdmi pmod

    sparkengineering/hdmi-pmod

    HDMI type A receptacle to Digilent Pmod™ breakout board

    7 parts4CERN-OHL-P-2.0