2 layers98 × 27 mm
2 layers50.1 × 30.1 mm
AntSniffer
skot/AntSniffer4This device is used to tap into the signals on an Antminer data cable for logic analyzers and other development purposes
- Size
- 50.1 × 30.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 15
- Pads
- 51
- Tracks, vias
- 121, 10
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 6 Nov 2023
- Updated
- 2 Apr 2024
Overview
AntSniffer is an open-source printed circuit board by skot, from the skot/AntSniffer repository on GitHub, published under the MIT licence. It is a 2-layer board of 50.1 × 30.1 mm with 5 parts on 15 nets, routed with 121 tracks and 10 vias.
It is built around the X2026WRS-2X09D-LPSW. It belongs with the sensors and measurement boards of this library.
Main components
1README
README.mdAntSniffer
This device is used to tap into the signals on an Antminer data cable for logic analyzers and other development purposes. The base design is a 4 layer PCB, with 2 SMD connectors that are compatible with Antminer 18 pin data cables. These cables are used for plugging in the hashboard to the control board. Also featured is an LED used to indicate that the connection is good and you are getting the required 3.3 volts from the control board. All data connections are broken out into a pin header with labels for their functions.
For other cool stuff like this join my Discord! There we discuss, design, and develop open source mining solutions and a little of everything else too! https://discord.gg/Px8RAvb9nr
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | X2026WRS-2X09D-LPSW | antsniffer:CONN-SMD_X2026WRS-2X09D-LPSW | CN1, CN2 |
| 1 | Conn_01x10_MountingPin | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Vertical | J1 |
| 1 | LOGO | antsniffer:LOGO | Ge |
| 1 | SnifferLOGO | antsniffer:SnifferLOGO | G*** |
Similar boards
- 2 layers21 × 33 mm
24g2usb pico2w
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
5 parts1.7kApache-2.0 - 2 layers53.2 × 59.6 mm
A10 OLinuXino Lime Rev B SHIELD TEMPLATE
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
5 parts1.5k - 2 layers30 × 11 mm
Main control board servo tester
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
5 parts1.1k - 2 layers78.8 × 35.3 mm
KiCadTest
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts915 - 2 layers50 × 23 mm
- 2 layers43.2 × 28.5 mm
- 2 layers20.3 × 15.2 mm
L0 light sensor
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
5 parts546MIT
Questions
How big is the AntSniffer PCB?
It measures 50.1 × 30.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AntSniffer use?
5 parts, built around the X2026WRS-2X09D-LPSW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AntSniffer KiCad files?
From the skot/AntSniffer repository on GitHub, at the commit this page was made from: the board is AntSniffer.kicad_pcb and its schematic AntSniffer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AntSniffer design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).