
Z80 computer
vaibhavvahbiav/z80-computer-v0
Prototype for a 8bit Computer PCB that i am trying to make, this is a learning iteration and this PCB was not manufactured. (open to suggestions and changes to the design as i am a student.)
Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

vaibhavvahbiav/z80-computer-v0
Prototype for a 8bit Computer PCB that i am trying to make, this is a learning iteration and this PCB was not manufactured. (open to suggestions and changes to the design as i am a student.)

hprd/z80-fpga-drop-in-replacement
UT Austin Fall 2025-Spring 2026 Senior Design Project for developing a Zilog Z80 CPU drop-in replacement using an FPGA.

Coin-OpCollection/Development-Documentation
This repository contains technical information, documentation, and reverse-engineering details for the base platform systems of FPGA implementations released by Coin-Op Collection.

RGBeter/Sega_CDX_Reproduction
Reproduction schematics and PCB of the Sega CDX Main board

ajokela/giga-shield
Arduino Giga R1 WiFi Shield with SN74LVC8T245PW driven level shifters for Z80 RetroShield interfacing

mmosko/Zx50
This is the primary CPU board for the Zx50 8-slot passive backplane system. It hosts the Z80 microprocessor (running at 5 MHz to 10 MHz) and acts as the master controller for the primary bus.

psomashekar/Development-Documentation
Please consider supporting these and future projects by joining the Coin-Op Collection Patreon.

CatspersCoffee/S100-Boards
S-100 bus boards designed and built: Z80 and 80386 CPU cards, SRAM/DRAM memory, CPLD/FPGA I/O and SPI boards, an 18-slot backplane and bus terminator.

mmosko/Zx50
This is the primary CPU board for the Zx50 8-slot passive backplane system. It hosts the Z80 microprocessor (running at 5 MHz to 10 MHz) and acts as the master controller for the primary bus.

mmosko/Zx50
This is the primary CPU board for the Zx50 8-slot passive backplane system. It hosts the Z80 microprocessor (running at 5 MHz to 10 MHz) and acts as the master controller for the primary bus.