Open-source KiCad boards

8 match “pull-up-dev”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

4 layers60 × 45 mm
Tuto kicad temp logger
pull-up-dev/tuto-kicad-temp-logger

69 parts
4 layers100 × 100 mm
FarmMesh Node
chinawrj/FarmMesh-Node
Developing an integrated hardware and software solution for farm-wide Mesh networking: RP2350B/ESP32-C5 nodes, firmware, network protocols, and Wi-Fi/BLE sensor access.
164 parts
4 layers118 × 94 mm
Lamp rev b controller
laminarforge/laminarforge-cad
Parametric CAD models (Rust + vcad) for LaminarForge open-source LAMP diagnostics device
153 parts
4 layers71 × 99 mm
Single
Panda-Intelligence/panda-standard-board
The current product is the Panda Standard 4.7-inch parallel E0470A01-family single-board engineering design, with a replaceable 2050mAh LCO battery pack (323576) and a finished-device maximum thickness of 7mm, including…
253 parts
4 layers71 × 129 mm
Core
Panda-Intelligence/panda-standard-board
The current product is the Panda Standard 4.7-inch parallel E0470A01-family single-board engineering design, with a replaceable 2050mAh LCO battery pack (323576) and a finished-device maximum thickness of 7mm, including…
208 parts
4 layers96 × 68 mm
PANDA STD CORE EVT quilter j501-merged
Panda-Intelligence/panda-standard-board
The current product is the Panda Standard 4.7-inch parallel E0470A01-family single-board engineering design, with a replaceable 2050mAh LCO battery pack (323576) and a finished-device maximum thickness of 7mm, including…
176 parts
4 layers96 × 68 mm
PANDA STD CORE EVT quilter j501-merged
Panda-Intelligence/panda-standard-board
The current product is the Panda Standard 4.7-inch parallel E0470A01-family single-board engineering design, with a replaceable 2050mAh LCO battery pack (323576) and a finished-device maximum thickness of 7mm, including…
155 parts
4 layers104.5 × 81 mm
Tinytapeout demo
KiCad/kicad-source-mirror
This is an active mirror of the KiCad development branch, which is hosted at GitLab (updated every time something is pushed). Pull requests on GitHub are not accepted or watched.
309 parts3.1kGPL-3.0