
Rgb matrix pcb
1-max-1/rgb-matrix
PCB and software for driving an 8x8 matrix of common anode RGB LED's.
Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

1-max-1/rgb-matrix
PCB and software for driving an 8x8 matrix of common anode RGB LED's.

farazaleboyeh/led-matrix
Graphics driver & hardware design for a custom-built display that shows streamed music artwork.

Joe-BN/MacroEins
A customizable macropad powered by the Esp32 c3 microcontroller.

marino222/clockclock24-replica
Replica of the kinetic art clock by "Humans Since 1982"

rafinjahan/Object_Detection_Using_A_Smart_Pressure_Sensing_Textile_Mat
Bachelor's Thesis 2026

F-Iglesias/Balancin
A self-balancing robot I made in 2023 as final project for my electronics technical program in high-school.

hridhayesh09/VoltWatch
Custom PCB power surge detection system using ESP32 and ZMPT101B

martincrespo77/Paneles-solares-pcb-esp32
Seguidor solar de 2 ejes con ESP32: firmware PlatformIO y PCB en KiCad


R2DeezNuts/Pendulo-Invertido
Control PID sobre ESP32, filtrado de sensores, telemetría e interfaz web para ajustar parámetros.

willy40/UVTimer
ESP32-based BLE timer replacement for NE555 in UV nail lamps. Features Android app control and BT136 triac switching.

bobberdolle1/SkySweep32
Open-source passive multi-band RF monitoring system | 855–925 MHz, 2.4 GHz, 5.8 GHz | Rev C first prototype

CivicTechTO/tRacket-sensor
Design files and source code for the tRacket noise sensor

CivicTechTO/tRacket-sensor
Design files and source code for the tRacket noise sensor

CivicTechTO/tRacket-sensor
Design files and source code for the tRacket noise sensor


syauqibilfaqih/Pullback-Device
Low-cost open source pullback device for varicose vein surgery

syauqibilfaqih/Pullback-Device
Low-cost open source pullback device for varicose vein surgery

marino222/clockclock24-replica
Replica of the kinetic art clock by "Humans Since 1982"

F-Iglesias/Balancin
A self-balancing robot I made in 2023 as final project for my electronics technical program in high-school.

F-Iglesias/Balancin
A self-balancing robot I made in 2023 as final project for my electronics technical program in high-school.

F-Iglesias/Balancin
A self-balancing robot I made in 2023 as final project for my electronics technical program in high-school.

martincrespo77/Paneles-solares-pcb-esp32
Seguidor solar de 2 ejes con ESP32: firmware PlatformIO y PCB en KiCad

Jutta-Proto/protocol-cpp
C++ JURA protocol implementation for controlling a Jura coffee maker over a serial (UART) connection.