Skip to the content

Boards using the TXS0102DCUR

18 boards

Boards in 16 GitHub repositories, designed in KiCad, that use the TXS0102DCUR by Texas Instruments (-40℃~+85℃ 1 1.65V~3.6V 2 2.3V~5.5V 24Mbps Auto Direction Detection Bidirectional Push-Pull、Open-drain VSSOP-8 Translators, Level Shifters ROHS). See how each wires it, with its parts, size, README and files; the TXS0102DCUR’s symbol, footprint and pinout are on its own page.

  • 12 layers180 × 150 mmMarble, the printed circuit board in 3D

    Marble

    BerkeleyLab/Marble

    Dual FMC FPGA carrier board developed for general purpose use in particle accelerator electronics instrumentation.

    1,006 parts35
  • 2 layers24.4 × 35.8 mmRotoPD Pro, the printed circuit board in 3D

    RotoPD Pro

    CentyLab/RotoPD_Pro

    Repo for RotoPD Pro hardware and documentation

    50 parts13
  • 6 layers80 × 70 mmIMX6 Demo Board from REF, the printed circuit board in 3D

    IMX6 Demo Board from REF

    ts-manuel/iMX6-Demo-Board

    Demo board for the i.MX6ULL Single-Core Processor with Arm Cortex-A7 Core

    504 parts10GPL-3.0
  • 4 layers100 × 90 mmTmc2130 mip, the printed circuit board in 3D

    Tmc2130 mip

    Mipot-Hi-Tech/mip_servo_controller

    MIP Series Design and Firmware Example

    226 parts3
  • 4 layers350.9 × 183.2 mmCG Files, the printed circuit board in 3D

    CG Files

    christopher-green2/PCB_Layout

    PCB Layout schematic

    327 parts1
  • 2 layers100 × 120.3 mmReceiver, the printed circuit board in 3D

    Receiver

    GAULAvionique/IdeFIX

    Repo pour le KiCad et Firmware du Beacon

    87 parts1
  • 4 layers64.8 × 29.8 mmPsocpcb, the printed circuit board in 3D

    Psocpcb

    zsj-28/PSoC6_UDB_I2C_Master

    implement a PSoC6 UDB I2C master and let it communicate with a Arduino as slave

    49 parts1
  • 2 layers80 × 55 mmIm01, the printed circuit board in 3D

    Im01

    amuzdgp3-prog/im-01-pulse-device

    Отдельный модуль к системе обслуживания аппаратов 2.apixspb.ru. Устройство слушает импульсные выходы монетоприёмника и купюроприёмника, копит показания в FRAM и дважды в сутки передаёт их на сервер по LTE Cat.1.

    108 parts
  • 2 layers20 × 20 mmB MLX90640-BRK R1.0, the printed circuit board in 3D

    B MLX90640-BRK R1.0

    Boardoza/Boardoza_MLX90640_Thermal_Camera_Breakout_Board

    Compact 32x24 pixel thermal imaging breakout board based on the Melexis MLX90640 infrared sensor array.

    12 partsCC-BY-SA-4.0
  • 2 layers20 × 20 mmB MLX90641-BRK R1.0, the printed circuit board in 3D

    B MLX90641-BRK R1.0

    Boardoza/Boardoza_MLX90641_Thermal_Camera_Breakout_Board

    MLX90641 Thermal Camera Breakout Board provides 16x12 infrared thermal imaging with I²C interface for non-contact temperature sensing applications.

    12 partsCC-BY-SA-4.0
  • 2 layers110 × 124 mmVision arm, the printed circuit board in 3D

    Vision arm

    deanasmith/vision-arm

    should be any of the following: - calibrate: Calibrate the cameras with the charuco board - track: Start tracking with multiple cameras - mono: Start with a single camera (mostly for debugging)

    68 parts
  • 6 layers80 × 70 mmIMX6 Demo Board, the printed circuit board in 3D

    IMX6 Demo Board

    ts-manuel/iMX6-Demo-Board

    Demo board for the i.MX6ULL Single-Core Processor with Arm Cortex-A7 Core

    498 parts10GPL-3.0
  • 2 layersG Love, the printed circuit board in 3D

    G Love

    AlexEsqu/G-Love

    [G-Love] est un projet de conception d’un système de vêtement électronique (wearable) porté sur les bras., intégrant des bandes LEDSs RGB réactives à l’environnement et aux mouvements du porteur.

    52 parts2
  • 2 layersG Love, the printed circuit board in 3D

    G Love

    AlexEsqu/G-Love

    [G-Love] est un projet de conception d’un système de vêtement électronique (wearable) porté sur les bras., intégrant des bandes LEDSs RGB réactives à l’environnement et aux mouvements du porteur.

    57 parts2
  • 4 layers43 × 25.8 mmDVI receiver, the printed circuit board in 3D

    DVI receiver

    openconcepts-ar/accel2d

    This project aims to provide a graphics server system based on hardware accelerated graphics, and a easy way to develop the graphics primitives.

    59 parts1
  • 2 layers38 × 26.8 mmReciever, the printed circuit board in 3D

    Reciever

    Electrium-Mobility/RC-W25

    Electrium Mobility W25 Remote Control Project

    25 parts
  • 2 layers61.2 × 26.1 mmBwlr1f prog, the printed circuit board in 3D

    Bwlr1f prog

    teapotlaboratories/bwlr1f

    44 parts
  • 4 layers50.5 × 36 mmFMU v171-imported, the printed circuit board in 3D

    FMU v171-imported

    yagamy4680/drone-study

    AUAV-OpenSource/FMUv4-PixRacer is the open hardware design of PixHawk FMUv4. It uses STM32F427 and MPU6000. (github)

    118 parts