4 layers
4 layers350.9 × 183.2 mm
CG Files
christopher-green2/PCB_Layout1PCB Layout schematic
- Size
- 350.9 × 183.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 327
- Nets
- 1,115
- Pads
- 2,129
- Tracks, vias
- 3,708, 486
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 6 Jul 2026
- Updated
- 16 Jul 2026
Overview
CG Files is an open-source printed circuit board by christopher-green2, from the christopher-green2/PCB_Layout repository on GitHub. It is a 4-layer board of 350.9 × 183.2 mm with 327 parts on 1,115 nets, routed with 3,708 tracks and 486 vias.
It is built around the 74AHC1G125GW, TPS62933PDRL and ESD9X5.0ST5G, with the TS5A3166DBVR-TP, JS102011SAQN and PTS645 among its other parts. Its parts include 120 capacitors, 88 resistors, 20 connectors and 5 diodes.
Main components
7
74AHC1G125GW
SOT-353-40℃~+125℃ 1 1 2V~5.5V 4.8ns@5.5V,50pF 40uA 74AHC 8mA 8mA Tri-State Unidirectional SOT-353 Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers
TPS62933PDRL
SOT-583-40℃~+150℃@(TJ) 1 125uA 200kHz~2.2MHz 3.8V~30V 3A 800mV~22V Adjustable Buck Buck Built-in Yes SOT-583 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
ESD9X5.0ST5G
SOD-923(0402)1 10A@8/20us 140W@8/20us 15V 5V 6V 80nA 90pF ESD IEC 61000-4-2、IEC 61000-4-5 SOD-923(0402) ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
TS5A3166DBVR-TP
SOT-23-5Analog Switches, MultiplexersTECH PUBLIC
JS102011SAQN
SMD-40℃~+85℃ 3.5mm 300mA 5,000 cycles 6V 9mm Black Rectangular Columnar SMD(SMT) Tab SPDT Surface Mount, Right Angle SMD Slide Switches ROHSC&KSlide SwitchesPTS645
UncategorisedC&K
TXS0102DCUR
VSSOP-8-40℃~+85℃ 1 1.65V~3.6V 2 2.3V~5.5V 24Mbps Auto Direction Detection Bidirectional Push-Pull、Open-drain VSSOP-8 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
Parts
327| Qty | Value | Footprint | References |
|---|---|---|---|
| 34 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R14, R19, R38, R39, R40, R41, R42, R46, R50, R51, R52, R53, R54, R64, R66 +18 |
| 22 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3, C39, C40, C44, C51, C54, C56, C57, C58, C59, C60, C61, C64, C65, C66, C67 +6 |
| 19 | .1uF | Capacitor_SMD:C_0402_1005Metric | C5, C8, C26, C28, C50, C73, C74, C79, C83, C84, C85, C86, C87, C88, C89, C106 +3 |
| 17 | .1u | Capacitor_SMD:C_0402_1005Metric | C96, C98, C100, C101, C103, C104, C105, C107, C109, C110, C111, C112, C114, C115, C119, C120 +1 |
| 16 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1, J2, J3, J4, J5, J6, J7, J8, J11, J12, J13, J14, J17, J18, J19, J20 |
| 12 | 74AHC1G125 | Package_TO_SOT_SMD:SOT-553 | BUF1, BUF2, BUF3, BUF4, BUF5, BUF6, BUF7, BUF8, BUF9, BUF10, BUF11, BUF12 |
| 11 | 100n | Capacitor_SMD:C_0402_1005Metric | C10, C13, C15, C17, C20, C21, C22, C29, C38, C41, C49 |
| 9 | 1uF | Capacitor_SMD:C_0603_1608Metric | C70, C72, C75, C76, C77, C78, C80, C81, C82 |
| 8 | 100k | Resistor_SMD:R_0603_1608Metric | R15, R17, R18, R20, R33, R87, R88, R89 |
| 8 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C97, C102, C106, C108, C113, C116, C117, C118 |
| 7 | 74LVC1GU04DRLR | Package_TO_SOT_SMD:SOT-553 | INV1, INV2, INV3, INV4, INV5, INV6, INV7 |
| 7 | TPS22917LDBVR | Package_TO_SOT_SMD:SOT-23-6 | LD1, LD2, LD3, LD4, LD5, LD6, LD7 |
| 6 | 12k | Resistor_SMD:R_0603_1608Metric | R65, R69, R77, R78, R82, R85 |
| 5 | 1u | Capacitor_SMD:C_0603_1608Metric | C7, C9, C18, C30, C31 |
| 5 | 22u | Capacitor_SMD:C_1206_3216Metric | C6, C14, C16, C45, C48 |
| 5 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | cg-SWD_Breakout_Parent1, LQFP64_SWD1, LQFP64_USART1, LQFP100_SWD1, LQFP100_USART1 |
| 5 | ESD9X5.0ST5G | Diode_SMD:D_SOD-923 | D1, D2, D3, D4, D5 |
| 5 | SN74LVC1G08DBVT | Package_TO_SOT_SMD:SOT-23-5 | AND1, AND2, AND3, AND4, NAND1 |
| 4 | 100 | Resistor_SMD:R_0603_1608Metric | R59, R60, R61, R63 |
| 4 | 10u | Capacitor_SMD:C_1206_3216Metric | C1, C34, C35, C36 |
| 4 | 22 | Resistor_SMD:R_0603_1608Metric | R56, R57, R58, R62 |
| 4 | 74AHC1G32QSE-7 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | OR1, OR2, OR3, OR4 |
| 4 | Conn_01x09_Pin | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J9, J10, J15, J16 |
| 4 | QTH-060-01-X-D-A | MyFootprints:SAMTEC_QTH-060-01-X-D-A | LQFP64_DATA_1, LQFP64_DEAD_1, LQFP100_DATA_1, LQFP100_DEAD_1 |
| 4 | TS5A3166DBVR | Package_TO_SOT_SMD:SOT-23-5 | SPST1, SPST2, SPST3, SPST4 |
| 3 | 22uF | Capacitor_SMD:C_1206_3216Metric | C4, C46, C47 |
| 3 | 5k | Resistor_SMD:R_0603_1608Metric | R24, R27, R29 |
| 3 | Green LED, V_f = 2.4 V at 20 mA, 0603 | LED_SMD:LED_0603_1608Metric | BAT_CHG1, BAT_SET1, PWR1 |
| 3 | TestPoint_Flag | TestPoint:TestPoint_Pad_1.0x1.0mm | 1V1, 3V1, VSYS1 |
| 2 | 1000pf | Capacitor_SMD:C_0402_1005Metric | C32, C33 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric | C52, C55 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C11, C23 |
| 2 | 1M | Resistor_SMD:R_0603_1608Metric | R6, R21 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C62, C63 |
| 2 | 330 | Resistor_SMD:R_0603_1608Metric | R11, R13 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R7 |
| 2 | JS102011SAQN | Button_Switch_SMD:SW_SPDT_CK_JS102011SAQN | 1V8_EN1, 3.3V_EN1 |
| 2 | PTS645 | MyFootprints:SWITCH_43SMTR92LFS | RESET1, TRGT_PWR_ON1 |
| 2 | TPS22918DBVR | MyFootprints:SOT95P280X145-6N | VTGT_1V1, VTGT_3V1 |
| 2 | TPS62933P | Package_TO_SOT_SMD:SOT-583-8 | BUCK_1V1, BUCK_3V1 |
| 2 | TXS0102DCUR | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | LS1, LS2 |
| 1 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C19 |
| 1 | 1.10k | Resistor_SMD:R_0603_1608Metric | R37 |
| 1 | 1.13k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 1.18k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 10.2k | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | 1043 Holder for 18650 | MyFootprints:BAT_1043 | BAT1 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R48 |
| 1 | 10p | Capacitor_SMD:C_0402_1005Metric | C43 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric | C37 |
| 1 | 12.5k | Resistor_SMD:R_0402_1005Metric | R47 |
| 1 | 133k | Resistor_SMD:R_0603_1608Metric | R36 |
| 1 | 18.6k | Resistor_SMD:R_0603_1608Metric | R28 |
| 1 | 1uH | Inductor_SMD:L_Wuerth_MAPI-4030 | L_BST1 |
| 1 | 2.2n | Capacitor_SMD:C_0402_1005Metric | C24 |
| 1 | 21k | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R49 |
| 1 | 220 | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 22p | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | 249k | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 258k | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | 2N7002 | MyFootprints:2N7002 | Q_OVP1 |
| 1 | 3.3 | Resistor_SMD:R_0402_1005Metric | R44 |
| 1 | 3.3 | Resistor_SMD:R_0603_1608Metric | R43 |
| 1 | 3.3n | Capacitor_SMD:C_0402_1005Metric | C25 |
| 1 | 31.25k | Resistor_SMD:R_0603_1608Metric | R45 |
| 1 | 358 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | LCD1 |
| 1 | 4.12k | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 4.7u | Inductor_SMD:L_Bourns_SRP7028A_7.3x6.6mm | LBK-1 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C27 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C53 |
| 1 | 44.2k | Resistor_SMD:R_0603_1608Metric | R32 |
| 1 | 46.4k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 47 | Resistor_SMD:R_0603_1608Metric | R55 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric | R31 |
| 1 | 470k | Resistor_SMD:R_0603_1608Metric | R34 |
| 1 | 6.8u WE-XHMI_6060 | Inductor_SMD:L_Wuerth_XHMI-6060 | L_BK1 |
| 1 | 66.5k | Resistor_SMD:R_0603_1608Metric | R35 |
| 1 | 680 | Resistor_SMD:R_0603_1608Metric | R30 |
The 304 most common of 327 parts.
More from christopher-green2/PCB_Layout
1Similar boards
- 2 layers44.3 × 20.6 mm
12-3v3-buck
dumitrescuoctavian22/1v2-5v_buck
A buck converter that takes usb-c input and outputs 5 selectable voltages, ranging from 1v2 to 5v.
19 parts1 - 2 layers45 × 45 mm
- 2 layers22.5 × 41.1 mm
Color computer dac
qbancoffee/coco_daiquiri
A board that replaces the functionality of the SC77526 DAC chip in the Tandy CoCo's
18 parts7GPL-3.0 - 2 layers21.7 × 12.7 mm
- 2 layers56.6 × 62.2 mm
ArduinoR3
Morethanmany2/Arduino-Uno
As a part of my day-to-day use, i tried to design the Arduino UNO dev board using all the datasheet materials and footprints required for precise design.
59 parts - 2 layers50 × 23.2 mm
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
29 parts1kGPL-3.0 - 2 layers59.8 × 52.5 mm
Ykts geigerboard
cansat-ptl/cubesat-boards
YKTSAT Kicad board files - mirror of https://git.yktaero.space/yktaero-dev/cubesat-boards
29 parts - 2 layers38.7 × 19.9 mm
Questions
How big is the CG Files PCB?
It measures 350.9 × 183.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the CG Files use?
327 parts, built around the 74AHC1G125GW, TPS62933PDRL, ESD9X5.0ST5G and TS5A3166DBVR-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CG Files KiCad files?
From the christopher-green2/PCB_Layout repository on GitHub, at the commit this page was made from: the board is CG Files.kicad_pcb and its schematic CG Files.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CG Files design in my own project?
Its repository states no licence, so its author keeps all rights: ask christopher-green2 before reusing the design.