Skip to the content

Boards using the TPS74801DRCR

4 boards

Boards in 4 GitHub repositories, designed in KiCad, that use the TPS74801DRCR by Texas Instruments (-40℃~+125℃@(Tj) 1 1.5A 5.5V 60dB 60mV@(1.5A) 800mV~3.6V Adjustable Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable VSON-10-EP(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS). See how each wires it, with its parts, size, README and files; the TPS74801DRCR’s symbol, footprint and pinout are on its own page.

  • 2 layers10.5 × 12 mmESP32 USB spy, the printed circuit board in 3D

    ESP32 USB spy

    cpla33/ESP32_USB-spy

    Smallest ESP32-based board ever possible

    21 parts
  • 4 layers36.6 × 100 mmEchometer, the printed circuit board in 3D

    Echometer

    wzwqoo/Echometer

    KiCad 10 project (v4.kicadpro, schematic + 4-layer PCB), fabrication outputs in fab/, BOM in v4.csv, and the parametric acoustic-horn generator ultrasonichornfreecad.py.

    78 parts
  • 4 layers58 × 56.1 mmRadar board, the printed circuit board in 3D

    Radar board

    wzwqoo/single_camera_single_radar_rx_launch_monitor

    A low-cost launch monitor that recovers a ball's launch vector from one high-speed monochrome camera and one 24 GHz CW Doppler radar — the RF front-end, the acquisition firmware, the synchronized recorder, and the…

    82 parts
  • 4 layers86 × 55 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hacker-devices

    Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

    22 parts2