
Echometer
wzwqoo/Echometer
KiCad 10 project (v4.kicadpro, schematic + 4-layer PCB), fabrication outputs in fab/, BOM in v4.csv, and the parametric acoustic-horn generator ultrasonichornfreecad.py.

Smallest ESP32-based board ever possible
ESP32 USB spy is an open-source printed circuit board by cpla33, from the cpla33/ESP32_USB-spy repository on GitHub. It is a 2-layer board of 10.5 × 12 mm with 21 parts on 35 nets, routed with 221 tracks and 22 vias.
It is built around the ESP32-C3FH4 and TPS74801DRCR. Its parts include 11 capacitors, 4 resistors, 2 ICs, 1 connector and 1 inductor. It belongs with the ESP32 and RISC-V boards of this library.
I was excited to see a few really cool custom boards built around the ESP32 chip and I decided to participate in that covert challenge creating the smallest board ever possible. As the main goal was to minimize the board dimensions as much as possible I agreed to refuse any GPIO population focusing on its main purpose. So what kind of the board could have no pins for external periphery connection? Right, considering its tiny dimensions that could be only the Spy-device.

This repo was created in addition to my article at Hackaday.io
Current board was designed around the components listed below:
The board itself designed to be plugged inside regular USB header.

I am not going to spy on somebody. Thus there is only a wifi-scanner firmware in the FIRMWARE to test the main feature of the board.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | Capacitor_SMD:C_0201_0603Metric | C3, C4, C201 |
| 3 | 1u | Capacitor_SMD:C_0201_0603Metric | C1, C2, C6 |
| 2 | 10k | Resistor_SMD:R_0201_0603Metric | R2, R203 |
| 2 | 10p | Capacitor_SMD:C_0201_0603Metric | C5, C209 |
| 1 | 10n | Capacitor_SMD:C_0201_0603Metric | C204 |
| 1 | 10u | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C207 |
| 1 | 1k15 | Resistor_SMD:R_0201_0603Metric | R3 |
| 1 | 2nH (0402) 900mA | Capacitor_SMD:C_0402_1005Metric | L201 |
| 1 | 3k57 | Resistor_SMD:R_0201_0603Metric | R1 |
| 1 | 40MHz (2016) | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y201 |
| 1 | Antenna_Chip | footprints:C2917719_ANT-SMD_L5.0-W2.0 | AE201 |
| 1 | ESP32-C3FH4 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm | U201 |
| 1 | TPS74801DRCR | Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm | U1 |
| 1 | USB_A | footprints:USB-A_pcb | J102 |

wzwqoo/Echometer
KiCad 10 project (v4.kicadpro, schematic + 4-layer PCB), fabrication outputs in fab/, BOM in v4.csv, and the parametric acoustic-horn generator ultrasonichornfreecad.py.

wzwqoo/single_camera_single_radar_rx_launch_monitor
A low-cost launch monitor that recovers a ball's launch vector from one high-speed monochrome camera and one 24 GHz CW Doppler radar — the RF front-end, the acquisition firmware, the synchronized recorder, and the…

jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

OpenDrone-hw/OpenRX
OpenRX open-source ExpressLRS receiver family hub; board sources live in four dedicated hardware repositories.


OpenDrone-hw/OpenRX-Gemini
Open-source dual-radio, dual-band ExpressLRS receiver for Gemini and Xrossband.

CyberSaiyanIT/why2025-badge
Cyber Saiyan community has designed and developed a special gadget for WHY2025. The badge was designed to recall the dragon spheres, and is an updated version of RomHack Camp 2022 badge, both in term of design and…

CDFER/Business-Cards
Showcasing a collection of functional PCB business cards, each demonstrating a unique embedded electronics project.
It measures 10.5 × 12 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the ESP32-C3FH4 and TPS74801DRCR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cpla33/ESP32_USB-spy repository on GitHub, at the commit this page was made from: the board is HARDWARE/DESIGN/esp32_usb_spy.kicad_pcb and its schematic HARDWARE/DESIGN/esp32_usb_spy.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask cpla33 before reusing the design.