Boards using the TPS26600PWPR

13 boards

Boards in 10 GitHub repositories, designed in KiCad, that use the TPS26600PWPR by Texas Instruments. See how each wires it, with its parts, size, README and files; the TPS26600PWPR’s symbol, footprint and pinout are on its own page.

4 layers100 × 80 mm
Chatgpt astra test2
fredriknk/chatgpt_astra_test2
Completely vibe coded ESP32 4-20ma input/output module
97 parts3MIT
4 layers68 × 68 mm
Tile
Bruhdows/klink
Klink is a magnetic tile system for building programmable machines. First up: a marble run with sensors, buttons, lights, gates, splitters and an elevator.
122 parts
2 layers92 × 69 mm
Base controller
dy-ma/halloween26
A small LED/resistor practice board used to learn KiCad schematic capture, footprints, routing, silkscreen, and Gerber export. It is not the tractor controller and was not intended for manufacture.
64 partsCERN-OHL-P-2.0
6 layers133 × 102 mm
Iasis
hydazz/iasis
An optional Raspberry Pi Compute Module 5 carrier for Iasis. It plugs into the main board's HubPD population and carries Ethernet, NVMe storage, an accessory USB-C port and a service USB-C port.
723 partsApache-2.0
6 layers56.5 × 23 mm
HMT500(ED260313A)
okchois/Oilinwater

110 parts
4 layers120 × 100 mm
Hotel test illustrative
rbrtwtrs/A2D-Test
Rev A ESP32-P4 Nano bench simulator/operator1.2. Companion: https://github.com/rovshop/herc-hotel-p4-firmware
162 parts
2 layers250 × 121 mm
PWM Schematic
Shriniketpk2124/Design-Assembly-and-Commissioning-of-a-GreenPHY-Based-EVSE-Signalling-and-Communication-Emulator
Mixed-signal EVSE prototype for IEC 61851 control-pilot signalling, Green PHY/SLAC, and ISO 15118-2 communication experiments.
109 parts
2 layers60 × 40 mm
AUX RTN GND SHORT
vehiclewaxberry/Space-Embodied-Robot-Complete
航天服务星具身智能机械臂机器人 | Space Service Robot with Embodied Intelligence — mechanical, electrical & harness, power & thermal, and propulsion hardware design.
15 parts2
2 layers60 × 70 mm
Wp10 aux protection
vehiclewaxberry/Space-Embodied-Robot-Complete
航天服务星具身智能机械臂机器人 | Space Service Robot with Embodied Intelligence — mechanical, electrical & harness, power & thermal, and propulsion hardware design.
32 parts2
4 layers148 × 78 mm
Hub
Bruhdows/klink
Klink is a magnetic tile system for building programmable machines. First up: a marble run with sensors, buttons, lights, gates, splitters and an elevator.
85 parts
4 layers111 × 53.3 mm
Giga adapter
daleondev/ProtoMate_Control
Open ProtoMate.kicadpro in KiCad 10. The complete system schematic and linked perfboard layout share the same project name and component identities.
127 parts
4 layers74 × 90 mm
Bay node
kartben/hw-testing-rack
3D-printed, tilted test shelf for 16 dev boards: sliding drawers, per-bay ESP32-S3 running Zephyr (USB/IP, power switching, metering), KiCad PCBs, OpenSCAD parts, BOM and an interactive 3D viewer
135 parts
4 layers76 × 100 mm
Power hub
kartben/hw-testing-rack
3D-printed, tilted test shelf for 16 dev boards: sliding drawers, per-bay ESP32-S3 running Zephyr (USB/IP, power switching, metering), KiCad PCBs, OpenSCAD parts, BOM and an interactive 3D viewer
181 parts