Skip to the content
1234567891011121314151617

TPS26600PWPR

Texas InstrumentsExtended

Part id
ti/TPS26600PWPR
Category
Surge Protection Devices (SPDs)
Package
HTSSOP-16-EP
Pins
17
In stock
7,626 at JLCPCB (C544399)
Used on
13 open-source boards

Overview

The TPS26600PWPR is a surge Protection Device made by Texas Instruments in a HTSSOP-16-EP package with 17 pins.

PCBKit's library has its KiCad symbol (Power_Management:TPS26600PWP, from KiCad's library) and its footprint (Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.66x2.46mm, from KiCad's library), ready for a KiCad board. 7,626 are in stock at JLCPCB (part C544399). 13 open-source boards in 10 repositories on GitHub use it.

Symbol

1IN3UVLO5OVP6MODE7SHDN8RTN9GND10IMON11ILIM12dVdT14FLT15OUT
Power_Management:TPS26600PWPFrom KiCad's library

Footprint

1234567891011121314151617
Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.66x2.46mmFrom KiCad's library

Pinout

17
The pins of the TPS26600PWPR
PinNameType
1INPower in
2INPassive
3UVLOInput
4NCNot connected
5OVPInput
6MODEInput
7SHDNInput
8RTNPassive
9GNDPower in
10IMONOutput
11ILIMPassive
12dVdTPassive
13NCNot connected
14FLTOpen collector
15OUTPower out
16OUTPassive
17RTNPassive

Open-source boards using it

13See all 13
  • 4 layers100 × 80 mmChatgpt astra test2, the printed circuit board in 3D

    Chatgpt astra test2

    fredriknk/chatgpt_astra_test2

    Completely vibe coded ESP32 4-20ma input/output module

    97 parts3MIT
  • 4 layers68 × 68 mmTile, the printed circuit board in 3D

    Tile

    Bruhdows/klink

    Klink is a magnetic tile system for building programmable machines. First up: a marble run with sensors, buttons, lights, gates, splitters and an elevator.

    122 parts
  • 2 layers92 × 69 mmBase controller, the printed circuit board in 3D

    Base controller

    dy-ma/halloween26

    A small LED/resistor practice board used to learn KiCad schematic capture, footprints, routing, silkscreen, and Gerber export. It is not the tractor controller and was not intended for manufacture.

    64 partsCERN-OHL-P-2.0
  • 6 layers133 × 102 mmIasis, the printed circuit board in 3D

    Iasis

    hydazz/iasis

    An optional Raspberry Pi Compute Module 5 carrier for Iasis. It plugs into the main board's HubPD population and carries Ethernet, NVMe storage, an accessory USB-C port and a service USB-C port.

    723 partsApache-2.0
  • 4 layers120 × 100 mmHotel test illustrative, the printed circuit board in 3D

    Hotel test illustrative

    rbrtwtrs/A2D-Test

    Rev A ESP32-P4 Nano bench simulator/operator1.2. Companion: https://github.com/rovshop/herc-hotel-p4-firmware

    162 parts
  • 2 layers250 × 121 mmPWM Schematic, the printed circuit board in 3D

    PWM Schematic

    Shriniketpk2124/Design-Assembly-and-Commissioning-of-a-GreenPHY-Based-EVSE-Signalling-and-Communication-Emulator

    Mixed-signal EVSE prototype for IEC 61851 control-pilot signalling, Green PHY/SLAC, and ISO 15118-2 communication experiments.

    109 parts
  • 2 layers60 × 40 mmAUX RTN GND SHORT, the printed circuit board in 3D

    AUX RTN GND SHORT

    vehiclewaxberry/Space-Embodied-Robot-Complete

    航天服务星具身智能机械臂机器人 | Space Service Robot with Embodied Intelligence — mechanical, electrical & harness, power & thermal, and propulsion hardware design.

    15 parts2

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the TPS26600PWPR?

Yes. The symbol is Power_Management:TPS26600PWP and the footprint Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.66x2.46mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS26600PWPR?

HTSSOP-16-EP, with 17 pins. Its footprint is drawn on this page.

Where is the TPS26600PWPR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS26600PWPR?

JLCPCB lists it as part C544399, with 7,626 in stock; the sellers' links on this page open their listings.

What can replace the TPS26600PWPR?

Parts like it in the library: the TPS26602PWP by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS26600PWPR?

13 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.