
Cm5
hydazz/iasis
An optional Raspberry Pi Compute Module 5 carrier for Iasis. It plugs into the main board's HubPD population and carries Ethernet, NVMe storage, an accessory USB-C port and a service USB-C port.

An optional Raspberry Pi Compute Module 5 carrier for Iasis. It plugs into the main board's HubPD population and carries Ethernet, NVMe storage, an accessory USB-C port and a service USB-C port.
Iasis is an open-source printed circuit board by hydazz, from the hydazz/iasis repository on GitHub, published under the Apache-2.0 licence. It is a 6-layer board of 133 × 102 mm with 723 parts on 612 nets, routed with 5,525 tracks and 1,924 vias.
It is built around the FUSB302BMPX, TPS55288RPMR and AP3441SHE-7B, with the TPD4E02B04DQAR, HD3SS3212IRKSR and 74LVC2G08DC-Q100H among its other parts. Its parts include 293 capacitors, 254 resistors, 65 ICs, 39 transistors and 6 diodes.
An optional Raspberry Pi Compute Module 5 carrier for Iasis. It plugs into the main board's HubPD population and carries Ethernet, NVMe storage, an accessory USB-C port and a service USB-C port. The CM5 case holds both boards.
| Item | Requirement or limit |
|---|---|
| Main board | HubPD, with its fitted side socket and power feed |
| Input | USB-C PD supply offering 20 V, connected to the main board |
| Storage | eMMC on the module, or NVMe for CM5 Lite; no microSD slot |
| NVMe SSD | M-key, 2230 / 2242 / 2280, up to 6 W |
| Fan | Up to 0.4 A; rated to tolerate 5.19 V |
| RTC backup | Raspberry Pi RTC Battery SC1163, rechargeable ML2020 |
| Accessory USB-C | 5 V / 1.5 A |
| Carrier power reservation | 35 W including conversion losses and VCONN |
The service port is for CM5 provisioning and recovery; power comes through the main board. Set PSU_MAX_CURRENT=5000 in the CM5 EEPROM configuration for the accessory USB allowance.
Connect the battery to J104. To enable charging, add this to /boot/firmware/config.txt and reboot:
dtparam=rtc_bbat_vchg=3000000Use this setting only with the specified rechargeable battery. See Raspberry Pi's RTC setup for diagnostics.
With the development tools installed:
mise run //hardware/boards/cm5:lint
mise run //hardware/boards/cm5:fabbuild/boards/cm5/ contains gerbers.zip, bom.csv and cpl.csv. The board is 75.1 × 102 mm and uses the main board's six-layer ordering settings. Select its accessory and service USB-C connectors (J401, J501) in the assembly order.
Use :step for the populated STEP and :preview for board.png. The PCB revision is recorded in the KiCad title block; tag Revision A fabrication files as cm5-rev-a.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 88 | 100n | Capacitor_SMD:C_0402_1005Metric | C1011, C1041, C1061, C1080, C1104, C1105, C1106, C1107, C1108, C1109, C1110, C1111, C1112, C1113, C1114, C1115 +72 |
| 63 | 100k | Resistor_SMD:R_0402_1005Metric | R1010, R1026, R1029, R1172, R1185, R1188, R1189, R1190, R1209, R1214, R1215, R1221, R1223, R1238, R1239, R1309 +47 |
| 48 | 10k | Resistor_SMD:R_0402_1005Metric | R1006, R1009, R1015, R1020, R1022, R1024, R1080, R1104, R1112, R1133, R1173, R1181, R1187, R1210, R1310, R1410 +32 |
| 44 | 10u 50V X7R | Capacitor_SMD:C_1210_3225Metric | C1002, C1003, C1008, C1009, C1230, C1231, C1232, C1233, C1236, C1237, C1238, C1239, C1330, C1331, C1332, C1333 +28 |
| 32 | 100n 50V X7R | Capacitor_SMD:C_0402_1005Metric | C1001, C1005, C1219, C1220, C1235, C1240, C1247, C1248, C1319, C1320, C1335, C1340, C1347, C1348, C1419, C1420 +16 |
| 22 | 22u 16V X7R | Capacitor_SMD:C_1210_3225Metric | C1013, C1014, C1015, C1016, C1042, C1043, C1044, C1045, C1046, C1047, C1062, C1063, C1064, C1065, C1066, C1067 +6 |
| 21 | 4.7k | Resistor_SMD:R_0402_1005Metric | R404, R405, R504, R505, R604, R605, R704, R1028, R1107, R1108, R1109, R1110, R1111, R1135, R1136, R1137 +5 |
| 18 | 47k 1% | Resistor_SMD:R_0402_1005Metric | R1003, R1014, R1021, R1231, R1232, R1236, R1331, R1332, R1336, R1431, R1432, R1436, R1531, R1532, R1536, R1631 +2 |
| 17 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q901, Q1003, Q1004, Q1005, Q1221, Q1234, Q1321, Q1334, Q1421, Q1434, Q1521, Q1534, Q1621, Q1634, Q1911, Q1912 +1 |
| 14 | 10n | Capacitor_SMD:C_0402_1005Metric | C1142, C1143, C1144, C1145, C1146, C1148, C1191, C1192, C1244, C1344, C1444, C1544, C1644, C2001 |
| 12 | 1u 10V X7R | Capacitor_SMD:C_0603_1608Metric | C404, C409, C504, C509, C604, C609, C704, C709, C804, C809, C902, C905 |
| 12 | 220p C0G | Capacitor_SMD:C_0402_1005Metric | C406, C407, C506, C507, C606, C607, C706, C707, C806, C807, C906, C907 |
| 12 | SP60N05GNJ | Package_SO:Vishay_PowerPAK_1212-8_Single | Q1001, Q1002, Q1232, Q1233, Q1332, Q1333, Q1432, Q1433, Q1532, Q1533, Q1632, Q1633 |
| 12 | TPD4E02B04DQAR | Package_SON:USON-10_2.5x1.0mm_P0.5mm | U402, U403, U502, U503, U602, U603, U702, U703, U802, U803, U901, U902 |
| 11 | 200k 1% | Resistor_SMD:R_0402_1005Metric | R203, R204, R205, R206, R232, R1235, R1335, R1435, R1535, R1635, R1913 |
| 10 | 100n 25V X7R | Capacitor_SMD:C_0402_1005Metric | C401, C402, C501, C502, C601, C602, C701, C702, C801, C802 |
| 10 | 10k 1% | Resistor_SMD:R_0402_1005Metric | R202, R1012, R1191, R1192, R1212, R1312, R1412, R1512, R1612, R1907 |
| 10 | TMGN4060DF | Package_SO:Vishay_PowerPAK_1212-8_Single | Q1230, Q1231, Q1330, Q1331, Q1430, Q1431, Q1530, Q1531, Q1630, Q1631 |
| 7 | 10k 0.1% | Resistor_SMD:R_0402_1005Metric | R1040, R1142, R1145, R1148, R1151, R1154, R1157 |
| 7 | 4.7n | Capacitor_SMD:C_0402_1005Metric | C1017, C1040, C1245, C1345, C1445, C1545, C1645 |
| 7 | HD3SS3212IRKSR | Package_DFN_QFN:DHVQFN-20-1EP_2.5x4.5mm_P0.5mm_EP1x3mm | U401, U501, U601, U701, U801, U903, U906 |
| 7 | TPS259470ARPWR | Iasis:TI_RPW0010A | U1005, U1202, U1302, U1402, U1502, U1602, U1902 |
| 6 | 100n 50V X7R | Capacitor_SMD:C_0603_1608Metric | C405, C505, C605, C705, C805, C903 |
| 6 | 100u 35V | Capacitor_SMD:CP_Elec_6.3x7.7 | C1018, C1234, C1334, C1434, C1534, C1634 |
| 6 | 1054500101 | Connector_USB:USB_C_Receptacle_Molex_105450-0101 | J401, J501, J601, J701, J801, J901 |
| 6 | 10u 16V X5R | Capacitor_SMD:C_0805_2012Metric | C1243, C1343, C1443, C1543, C1643, C1912 |
| 6 | 2.2u 25V X5R | Capacitor_SMD:C_0603_1608Metric | C1218, C1318, C1418, C1518, C1618, C1904 |
| 6 | 39k 1% | Resistor_SMD:R_0402_1005Metric | R1019, R1211, R1311, R1411, R1511, R1611 |
| 6 | 47k 0.1% | Resistor_SMD:R_0402_1005Metric | R1143, R1146, R1149, R1152, R1155, R1158 |
| 6 | 90.9k 0.1% | Resistor_SMD:R_0402_1005Metric | R1141, R1144, R1147, R1150, R1153, R1156 |
| 6 | FUSB302BMPX | Package_DFN_QFN:WQFN-14-1EP_2.5x2.5mm_P0.5mm_EP1.45x1.45mm | U405, U505, U605, U705, U805, U905 |
| 6 | LM74502DDFR | Package_TO_SOT_SMD:Texas_DDF0008A_SOT-8_1.6x2.9mm_P0.65mm | U1001, U1231, U1331, U1431, U1531, U1631 |
| 6 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5, H6 |
| 6 | SK6812SIDE-A | Iasis:OPSCO_SK6812SIDE-A | D1170, D1171, D1172, D1173, D1174, D1175 |
| 6 | TPD6S300ARUKR | Iasis:WQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm_ThermalVias | U404, U504, U604, U704, U804, U904 |
| 5 | 1 | Resistor_SMD:R_0402_1005Metric | R1230, R1330, R1430, R1530, R1630 |
| 5 | 100p C0G | Capacitor_SMD:C_0402_1005Metric | C1246, C1346, C1446, C1546, C1646 |
| 5 | 10m 1% | Resistor_SMD:R_1206_3216Metric | R1234, R1334, R1434, R1534, R1634 |
| 5 | 15k 1% | Resistor_SMD:R_0402_1005Metric | R1237, R1337, R1437, R1537, R1637 |
| 5 | 1k 1% | Resistor_SMD:R_0805_2012Metric | R1222, R1322, R1422, R1522, R1622 |
| 5 | 1n 50V C0G | Capacitor_SMD:C_0402_1005Metric | C1217, C1317, C1417, C1517, C1617 |
| 5 | 4.7u | Inductor_SMD:L_Changjiang_FXL1050 | L1230, L1330, L1430, L1530, L1630 |
| 5 | 56k 1% | Resistor_SMD:R_0402_1005Metric | R1233, R1333, R1433, R1533, R1633 |
| 5 | 6.49k 1% | Resistor_SMD:R_0402_1005Metric | R1213, R1313, R1413, R1513, R1613 |
| 5 | 74LVC2G08DC-Q100H | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U1203, U1303, U1403, U1503, U1603 |
| 5 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1230, NT1330, NT1430, NT1530, NT1630 |
| 5 | TPS55288RPMR | Iasis:TI_RPM0026A | U1230, U1330, U1430, U1530, U1630 |
| 4 | 100n 100V X7R | Capacitor_SMD:C_0603_1608Metric | C1004, C1010, C2002, C2003 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R1013, R1102, R1103 |
| 3 | 1k 1% | Resistor_SMD:R_0402_1005Metric | R1018, R1025, R1909 |
| 3 | 33p C0G | Capacitor_SMD:C_0402_1005Metric | C201, C202, C1012 |
| 3 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 3 | TMUX1511RSVR | Package_DFN_QFN:UQFN-16_1.8x2.6mm_P0.4mm | U907, U1141, U1142 |
| 2 | 100k 0.1% | Resistor_SMD:R_0603_1608Metric | R1001, R1002 |
| 2 | 100n 16V X7R | Capacitor_SMD:C_0402_1005Metric | C222, C223 |
| 2 | 10k 1% NTC | Resistor_SMD:R_0603_1608Metric | TH1191, TH1192 |
| 2 | 10u 10V | Capacitor_SMD:C_0603_1608Metric | C211, C221 |
| 2 | 15p C0G | Capacitor_SMD:C_0402_1005Metric | C1118, C1119 |
| 2 | 2.2k | Resistor_SMD:R_0402_1005Metric | R1131, R1132 |
| 2 | 20k 1% | Resistor_SMD:R_0402_1005Metric | R1027, R1908 |
| 2 | 22k 1% | Resistor_SMD:R_0402_1005Metric | R1017, R1916 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R1105, R1106 |
| 2 | 33 | Resistor_SMD:R_0402_1005Metric | R1101, R1171 |
| 2 | 4.7u 10V X5R | Iasis:C_0402_1005Metric_WideGap | C1101, C1102 |
| 2 | 4.7u 10V X5R | Capacitor_SMD:C_0402_1005Metric | C1103, C1117 |
| 2 | 6.8k 1% | Resistor_SMD:R_0402_1005Metric | R1008, R2002 |
| 2 | 74HC595PW | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U1181, U1182 |
| 2 | AP3441SHE-7B | Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.9x1.7mm | U1040, U1060 |
| 2 | B3U-1000P | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1101, SW1102 |
| 2 | SN74AUP1G08DCKR | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U204, U1132 |
| 2 | TPS26600PWPR | Iasis:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.66x2.46mm_ThermalVias | U1003, U2001 |
| 1 | 100 | Resistor_SMD:R_0402_1005Metric | R1910 |
| 1 | 100k 1% | Resistor_SMD:R_0402_1005Metric | R1005 |
| 1 | 10k 0.1% | Resistor_SMD:R_0603_1608Metric | R1004 |
| 1 | 120k 1% | Resistor_SMD:R_0402_1005Metric | R1016 |
| 1 | 12k 1% | Resistor_SMD:R_0402_1005Metric | R201 |
| 1 | 2.2k 0.1% | Resistor_SMD:R_0402_1005Metric | R1041 |
| 1 | 22 | Resistor_SMD:R_0603_1608Metric | R1007 |
| 1 | 22n 100V X7R | Capacitor_SMD:C_0603_1608Metric | C1006 |
| 1 | 240k 1% | Resistor_SMD:R_0402_1005Metric | R2001 |
The 686 most common of 723 parts.
It measures 133 × 102 mm and has 6 copper layers, 1.57 mm thick.
723 parts, built around the FUSB302BMPX, TPS55288RPMR, AP3441SHE-7B and TPD4E02B04DQAR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hydazz/iasis repository on GitHub, at the commit this page was made from: the board is hardware/boards/iasis/iasis.kicad_pcb and its schematic hardware/boards/cm5/accessory-port.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).

hydazz/iasis
An optional Raspberry Pi Compute Module 5 carrier for Iasis. It plugs into the main board's HubPD population and carries Ethernet, NVMe storage, an accessory USB-C port and a service USB-C port.

Twisted-Fields/acorn-robot-electronics
PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

adamhrnciar/hyperion-controller
Open-source controller for 150 g antweight combat robots: RP2354A, 2x DRV8231A, 2-4S, ELRS/CRSF/SBUS/iBUS/PPM input, IMU. KiCad 10, CERN-OHL-S-2.0.

Panda-Intelligence/panda-standard-board
The current product is the Panda Standard 4.7-inch parallel E0470A01-family single-board engineering design, with a replaceable 2050mAh LCO battery pack (323576) and a finished-device maximum thickness of 7mm, including…

jackw01/pi-pico-printer-board
Tinkerer-friendly Klipper compatible 3D printer control board using Raspberry Pi Pico

azais-corentin/espion
Multi-camera IR marker tracking: ESP32-P4/C5 firmware, Rust host, KiCad hardware

jonahsaunders/planar-studio
KiCad extension for the copper you can't buy as a part — design planar inductors, transformers, PCB motor stators, filters, and antennas, with electrical modeling and direct write-back to your board.

gallicchio/AMOD-and-RFMOD
The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

Keitark/fc-rom-vomitter
Wi-Fi NROM development cartridge for Famicom: ESP32-S3, SRAM, KiCad, firmware, fabrication evidence, and an experimental NES variant.