Skip to the content
242526

TPS55288RPMR

Texas InstrumentsExtended

-40℃~+125℃@(TJ) 1 16A 2.2MHz 2.7V~36V 800mV~22V 860uA Adjustable Buck-Boost Buck-Boost Built-in Yes VQFN-26-HR(3.5x4) DC-DC Converters ROHS

Part id
ti/TPS55288RPMR
Category
DC DC Converters
Package
VQFN-26-HR(3.5x4)
Pins
26
In stock
4,376 at JLCPCB (C2864583)
Used on
7 open-source boards

Overview

The TPS55288RPMR is a DC DC Converter made by Texas Instruments in a VQFN-26-HR(3.5x4) package with 26 pins. -40℃~+125℃@(TJ) 1 16A 2.2MHz 2.7V~36V 800mV~22V 860uA Adjustable Buck-Boost Buck-Boost Built-in Yes VQFN-26-HR(3.5x4) DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TPS55288RPMR, from EasyEDA) and its footprint (EasyEDA_Cloud:VQFN-HR-26_L4.0-W3.5_TPS55288RPMR, from EasyEDA), ready for a KiCad board. 4,376 are in stock at JLCPCB (part C2864583). 7 open-source boards in 7 repositories on GitHub use it.

Symbol

1DR1L2DR1H3VIN4EN/UVLO5SCL6SDA7DITH/SYNC8FSW9PGND10AGND11VOUT12ISP13ISN14FB/INT15MODE16CDC17ILIM18COMP19VCC20BOOT221SW222BOOT123SW124PGND25SW226VOUT
EasyEDA_Cloud:TPS55288RPMRFrom EasyEDA

Footprint

242526
EasyEDA_Cloud:VQFN-HR-26_L4.0-W3.5_TPS55288RPMRFrom EasyEDA

From the datasheet

19
Supply, least
2.7 V · VIN, recommended operating min · p. 5
Supply, most
36 V · VIN, recommended operating max · p. 5
Supply, absolute maximum
40 V · VIN, absolute maximum · p. 5
Junction, hottest
150 °C · Junction temperature absolute maximum · p. 5
Takes asleep
6.8 µA · VIN shutdown current typical, IC disabled, VIN = 2.9 V to 14 V · p. 6
Feedback reference
1.129 V · FB/INT typical, external feedback with REF=03C0h · p. 7
Feedback reference
846 mV · FB/INT typical, external feedback with REF=02C6h · p. 7
Feedback reference
508 mV · FB/INT typical, external feedback with REF=019Ah · p. 7
Feedback reference
282 mV · FB/INT typical, external feedback with REF=00D2h · p. 7
Switches at
200 kHz · Switching frequency typical, RFSW = 100 kΩ · p. 7
Switches at
2.2 MHz · Switching frequency typical, RFSW = 9.09 kΩ · p. 7
Current limit
16.5 A · Average inductor current limit typical, RILIM = 20 kΩ, VIN = 8 V, VOUT = 20 V, 400 kHz, FPWM or PFM · p. 7
Current limit
5.5 A · Average inductor current limit typical, RILIM = 60 kΩ, VIN = 5 V, VOUT = 14 V, 2.2 MHz, FPWM or PFM · p. 7
Junction to air (VQFN-HR (RPM)-26 PINS)
47.5 K/W · Junction-to-ambient, Standard · p. 6
Junction to air (VQFN-HR (RPM)-26 PINS)
25.8 K/W · Junction-to-ambient, EVM · p. 6
Junction to case (VQFN-HR (RPM)-26 PINS)
23.8 K/W · Junction-to-case (top), Standard · p. 6
Junction to board (VQFN-HR (RPM)-26 PINS)
12.8 K/W · Junction-to-board resistance, Standard · p. 6
Junction to board (VQFN-HR (RPM)-26 PINS)
11.6 K/W · Junction-to-board characterization parameter, EVM · p. 6
Data rate, most
1 Mbit/s · I2C fast mode plus max · p. 22

What it is and has

15
USB power delivery
Programmable power supply (PPS) support · p. 1
Input voltage range
2.7 V to 36 V · p. 1
Reference voltage accuracy
±1% · p. 1
Output current monitoring accuracy
±5% · p. 1
Interface
I2C · p. 1
Clock synchronization
Optional · p. 1
Spread spectrum
Optional programmable · p. 1
Protection
Output overvoltage protection · p. 1
Protection
Hiccup mode for output short-circuit protection · p. 1
Protection
Thermal shutdown protection · p. 1
Package
4.0-mm × 3.5-mm Hotrod QFN · p. 1
Soft-start time
Fixed 4 ms · p. 1
DAC
10-bit, programmable reference from 45 mV to 1.2 V · p. 19
Switching frequency
200 kHz to 2.2 MHz · p. 14
Protection
Thermal shutdown with automatic restart · p. 22

Around it

11
cap >4.7 μF
between VCC and AGND; Required ceramic capacitor. · p. 4
cap 0.1 µF
between BOOT2 and SW2; Required ceramic bootstrap capacitor. · p. 4
cap 0.1 µF
between BOOT1 and SW1; Required ceramic bootstrap capacitor. · p. 4
res Not specified
between FSW and AGND; Programs switching frequency. · p. 3
res Not specified
between ISP and ISN; Optional current sense resistor for output current limiting. · p. 3
res Not specified
between MODE and AGND; Selects operating modes, VCC supply source and I2C address. · p. 4
res Not specified
between CDC and AGND; Sets cable voltage droop compensation. · p. 4
res Not specified
between ILIM and AGND; Sets average inductor current limit. · p. 4
cap Not specified
between DITH/SYNC and GND; Sets dithering frequency. · p. 3
res 20 kΩ
between ILIM and analog ground; Sets typical average inductor current limit to 16.5 A. · p. 19
res 10-mΩ
between ISP and ISN; Current sensing resistor for programmable output current limit from 0 A to 6.35 A. · p. 21

Specifications

131
ParameterConditionsAs printedPage
Voltage range at terminalsVIN, SW1min -0.3 · max 40 V5
Voltage range at terminalsVCC, DRL1, SCL, SDA, ILIM, FSW, COMP, FB/INT, MODE, CDC, DITH/SYNCmin -0.3 · max 6 V5
Voltage range at terminalsVOUT, SW2, ISP, ISNmin -0.3 · max 25 V5
Voltage range at terminalsENmin -0.3 · max 20 V5
Voltage range at terminalsDRL1, SCL, SDA, ILIM, FSW, COMP, FB/INT, MODE, CDC, DITH/SYNC; maximum VCC+0.3 Vmin -0.3 V5
Operating Junction, TJ TJmin -40 · max 150 °C5
Storage temperature Tstgmin -65 · max 150 °C5
Electrostatic discharge V(ESD)Human body model (HBM) ESD stress voltagemin -2000 · max 2000 V5
Electrostatic discharge V(ESD)Charged device model (CDM) ESD stress voltagemin -500 · max 500 V5
Input voltage range VINmin 2.7 · max 36 V5
Output voltage range VOUTmin 0.8 · max 22 V5
Effective inductance range LNOM = 4.7 uHmin 0.7 · typ 4.7 · max 13 uH5
Effective input capacitance range CINNOM = 22 uFmin 4.7 · typ 22 uF5
Effective output capacitance range COUTNOM = 100 uFmin 10 · typ 100 · max 1000 uF5
Operating junction temperature TJmin -40 · max 125 °C5
Junction-to-ambient thermal resistance RθJAVQFN-HR (RPM)-26 PINS, Standardtyp 47.5 °C/W6
Junction-to-ambient thermal resistance RθJAVQFN-HR (RPM)-26 PINS, EVMtyp 25.8 °C/W6
Junction-to-case (top) thermal resistance RθJC(top)VQFN-HR (RPM)-26 PINS, Standardtyp 23.8 °C/W6
Junction-to-board thermal resistance RθJBVQFN-HR (RPM)-26 PINS, Standardtyp 12.8 °C/W6
Junction-to-top characterization parameter ΨJTVQFN-HR (RPM)-26 PINS, Standardtyp 0.5 °C/W6
Junction-to-top characterization parameter ΨJTVQFN-HR (RPM)-26 PINS, EVMtyp 0.6 °C/W6
Junction-to-board characterization parameter ΨJBVQFN-HR (RPM)-26 PINS, Standardtyp 12.7 °C/W6
Junction-to-board characterization parameter ΨJBVQFN-HR (RPM)-26 PINS, EVMtyp 11.6 °C/W6
Junction-to-case (bottom) thermal resistance RθJC(bot)VQFN-HR (RPM)-26 PINS, Standardtyp 7.8 °C/W6
Under voltage lockout threshold VVIN_UVLOVIN risingmin 2.8 · typ 2.9 · max 3 V6
Under voltage lockout threshold VVIN_UVLOVIN fallingmin 2.6 · typ 2.65 · max 2.7 V6
Quiescent current into the VIN pin IQIC enabled, no load, no switching. VIN = 3V to 24V, VOUT = 0.8V, VFB = VREF + 0.1V, RFSW=100kΩ, TJ up to 125°Ctyp 760 · max 860 uA6
Quiescent current into the VOUT pin IQIC enabled, no load, no switching, VIN = 2.9V, VOUT = 3V to 20V, VFB = VREF + 0.1V, RFSW=100kΩ, TJ up to 125°Ctyp 760 · max 860 uA6
Shutdown current into the VIN pin ISDIC disabled, VIN = 2.9V to 14V, TJ up to 125°Ctyp 6.8 · max 10 uA6
Internal regulator output VCCIVCC = 50mA, VIN = 8V, VOUT = 20Vmin 5 · typ 5.2 · max 5.4 V6
VCC dropout VCC_DOVIN = 5.0V, VOUT = 20V IVCC = 60mAtyp 200 · max 320 mV6
VCC dropout VCC_DOVIN = 14V, VOUT = 5.0V, IVCC = 60mAtyp 110 · max 170 mV6
EN Logic high threshold VEN_HVCC = 2.7V to 5.5Vmax 1.15 V6
EN Logic low threshold VEN_LVCC = 2.7V to 5.5Vmin 0.4 V6
Enable threshold hysteresis VEN_HYSVCC = 2.7V to 5.5Vmin 0.05 · typ 0.12 V6
UVLO rising threshold at the EN/UVLO pin VUVLOVCC = 3.0V to 5.5Vmin 1.2 · typ 1.23 · max 1.26 V6
UVLO threshold hysteresis VUVLO_HYSVCC = 3.0V to 5.5Vmin 8 · typ 14 · max 20 mV6
Sourcing current at the EN/UVLO pin IUVLOVEN/UVLO = 1.3Vmin 4.5 · typ 5 · max 5.5 uA6
Output overvoltage protection threshold VOVPmin 22.5 · typ 23.5 · max 24.5 V6
Over voltage protection hysteresis VOVP_HYStyp 1 V6
Leakage current at the FB pin IFB_LKGTJ up to 125°Cmax 100 nA6
Leakage current into the VOUT pin IVOUT_LKGIC disabled, VOUT = 20V, VSW2 = 0V, TJ up to 125°Ctyp 1 · max 20 uA6
Output discharge current IDISCHGVOUT = 20V, VCC = 5.2Vmin 40 · typ 100 · max 170 mA6
Resolution of reference voltage DACtyp 10 bits7
Integral non-linearity INLmin -4 · max 4 LSB7
Differential non-linearity DNLmin -1 · max 2 LSB7
Output voltage when VREF is set to 1.129V VOUT_FULLVOUT_FS=03h, REF=03C0h, VREF=1.129Vmin 19.7 · typ 20 · max 20.3 V7
Output voltage when VREF is set to 1.129V VOUT_FULLVOUT_FS=02h, REF=03C0h, VREF=1.129Vmin 14.78 · typ 15 · max 15.22 V7
Output voltage when VREF is set to 1.129V VOUT_FULLVOUT_FS=01h, REF=03C0h, VREF=1.129Vmin 9.85 · typ 10 · max 10.15 V7
Output voltage when VREF is set to 1.129V VOUT_FULLVOUT_FS=00h, REF=03C0h, VREF=1.129Vmin 4.93 · typ 5 · max 5.07 V7
Output voltage when VREF is set to 45mV VOUT_ZEROVOUT_FS=03h, REF=0000h, VREF=45mVmin 0.74 · typ 0.8 · max 0.86 V7
Output voltage when VREF is set to 45mV VOUT_ZEROVOUT_FS=02h, REF=0000h, VREF=45mVmin 0.56 · typ 0.6 · max 0.64 V7
Output voltage when VREF is set to 45mV VOUT_ZEROVOUT_FS=01h, REF=0000h, VREF=45mVmin 0.37 · typ 0.4 · max 0.43 V7
Output voltage when VREF is set to 45mV VOUT_ZEROVOUT_FS=00h, REF=0000h, VREF=45mVmin 0.18 · typ 0.2 · max 0.22 V7
Reference voltage at the FB/INT pin when using external feedback VREFExternal feedback with REF=03C0hmin 1.117 · typ 1.129 · max 1.141 V7
Reference voltage at the FB/INT pin when using external feedback VREFExternal feedback with REF=02C6hmin 0.837 · typ 0.846 · max 0.855 V7
Reference voltage at the FB/INT pin when using external feedback VREFExternal feedback with REF=019Ahmin 0.502 · typ 0.508 · max 0.514 V7
Reference voltage at the FB/INT pin when using external feedback VREFExternal feedback with REF=00D2hmin 0.276 · typ 0.282 · max 0.288 V7
Low-side MOSFET on resistance on boost side RDS(on)VOUT = 20V, VCC= 5.2Vtyp 7.1 mΩ7
High-side MOSFET on resistance on boost side RDS(on)VOUT = 20V, VCC= 5.2Vtyp 7.6 mΩ7
Switching frequency fSWRFSW = 100kΩmin 180 · typ 200 · max 220 kHz7
Switching frequency fSWRFSW = 9.09kΩmin 2000 · typ 2200 · max 2400 kHz7
Min. off time tOFF_minBoost modetyp 100 · max 145 ns7
Min. on time tON_minBuck modetyp 90 · max 130 ns7
Voltage at the FSW pin VFSWtyp 1 V7
Average inductor current limit ILIM_AVGRILIM = 20kΩ, VIN = 8V, VOUT = 20V, fSW = 400kHz, FPWMmin 14 · typ 16.5 · max 19 A7
Average inductor current limit ILIM_AVGRILIM = 20kΩ, VIN = 8V, VOUT = 20V, fSW = 400kHz, PFMmin 14 · typ 16.5 · max 19 A7
Average inductor current limit ILIM_AVGRILIM = 60kΩ, VIN = 5V, VOUT = 14V, fSW = 2.2MHz, FPWMmin 4 · typ 5.5 A7
Average inductor current limit ILIM_AVGRILIM = 60kΩ, VIN = 5V, VOUT = 14V, fSW = 2.2MHz, PFMmin 4 · typ 5.5 A7
Peak inductor current limit at high side ILIM_PKRILIM = 20kΩ, VIN = 8V, VOUT = 20V, fSW = 400kHz, FPWMtyp 25 A7
Peak inductor current limit at high side ILIM_PKRILIM = 20kΩ, VIN = 8V, VOUT = 20V, fSW = 400kHz, PFMtyp 25 A7
Voltage at the ILIM pin VILIMVOUT = 3Vtyp 0.6 V7
Current loop regulation voltage between the ISP and ISN pins VSNSVISN = 2V to 21V,IOUT_LIMIT Register = 11100100bmin 48 · typ 50 · max 52 mV8
Current loop regulation voltage between the ISP and ISN pins VSNSVISN = 2V to 21V,IOUT_LIMIT Register = 10111100bmin 28 · typ 30 · max 32 mV8
Voltage at the CDC pin VCDCRCDC = 20kΩ or floating, VISP – VISN = 50mVmin 0.95 · typ 1 · max 1.05 V8
Voltage at the CDC pin VCDCRCDC = 20kΩ or floating, VISP – VISN = 2mVtyp 40 · max 75 mV8
VOUT increase for cable droop compensation VOUT_CDCInternal output feedback, CDC[2:0]=111, VISP – VISN = 50mVmin 650 · typ 700 · max 750 mV8
VOUT increase for cable droop compensation VOUT_CDCInternal output feedback, CDC[2:0]=111, VISP – VISN = 2mVtyp 30 · max 60 mV8
VOUT increase for cable droop compensation VOUT_CDCInternal output feedback, CDC[2:0]=001, VISP – VISN = 50mVmin 70 · typ 100 · max 130 mV8
VOUT increase for cable droop compensation VOUT_CDCInternal output feedback, CDC[2:0]=001, VISP – VISN = 10mVtyp 20 · max 40 mV8
FB/INT pin sinking current IFB_CDCExternal output feedback, RCDC = 20kΩ, VISP – VISN = 50mVmin 7.23 · typ 7.5 · max 7.87 uA8
FB/INT pin sinking current IFB_CDCExternal output feedback, RCDC = 20kΩ, VISP – VISN = 0mVtyp 0 · max 0.3 uA8
FB/INT pin sinking current IFB_CDCExternal output feedback, RCDC = floating, VISP – VISN = 50mVtyp 0 · max 0.3 uA8
COMP pin sink current ISINKVFB = VREF + 400mV, VCOMP=1.5V, VCC=5Vtyp 20 uA8
COMP pin source current ISOURCEVFB = VREF - 400mV, VCOMP=1.5V, VCC=5Vtyp 60 uA8
High clamp voltage at the COMP pin VCCLPHtyp 1.8 V8
Low clamp voltage at the COMP pin VCCLPLtyp 0.7 V8
Error amplifier transconductance GEAtyp 190 uA/V8
Soft-start time tSSmin 3 · typ 4 · max 5 ms8
Low-state voltage drop VDR1H_LVDR1H – VSW1, 100-mA sinkingtyp 0.1 V8
High-state voltage drop VDR1H_HVBOOT1 – VDR1H, 100-mA sourcingtyp 0.2 V8
Low-state voltage drop VDR1L_L100-mA sinkingtyp 0.1 V8
High-state voltage drop VDR1L_HVCC – VDR1L, 100-mA sourcingtyp 0.2 V8
Dithering charge current IDITH_CHGVDITH/SYNC = 1.0V, RFSW=49.9kΩ, voltage rising from 0.85Vtyp 2 uA8
Dithering discharge current IDITH_DISVDITH/SYNC = 1.0V, RFSW=49.9kΩ, voltage falling from 1.15Vtyp 2 uA8
Dither high threshold VDITH_Htyp 1.07 V8
Dither low threshold VDITH_Ltyp 0.93 V8
Sync clock high voltage threshold VSNYC_Hmax 1.2 V8
Sync clock low voltage threshold VSYNC_Lmin 0.4 V8
Minimum sync clock pulse width tSYNC_MINmin 50 ns8
Hiccup off time tHICCUPTJ = -40°C to 125°C, VIN = 12 V and VOUT = 20 V; typical at TJ = 25°Ctyp 76 ms9
Sourcing current from the MODE pin IMODEVMODE = 2.5Vmin 9 · typ 10 · max 11 uA9
Detection threshold voltage at the MODE pin VMODE_DT1min 1.147 · typ 1.22 · max 1.293 V9
Detection threshold voltage at the MODE pin VMODE_DT2min 0.824 · typ 0.88 · max 0.936 V9
Detection threshold voltage at the MODE pin VMODE_DT3min 0.571 · typ 0.614 · max 0.657 V9
Detection threshold voltage at the MODE pin VMODE_DT4min 0.321 · typ 0.351 · max 0.381 V9
Detection threshold voltage at the MODE pin VMODE_DT5min 0.168 · typ 0.189 · max 0.21 V9
Detection threshold voltage at the MODE pin VMODE_DT6min 0.08 · typ 0.097 · max 0.114 V9
Detection threshold voltage at the MODE pin VMODE_DT7min 0.014 · typ 0.027 · max 0.04 V9
IO voltage range for I2C VI2C_IOmin 1.7 · max 5.5 V9
I2C input high threshold VI2C_HVCC = 2.7V to 5.5Vmax 1.2 V9
I2C input low threshold VI2C_LVCC = 2.7V to 5.5Vmin 0.4 V9
Leakage current into FB/INT pin when outputting high impedance IFB/INT_HVFB/INT = 5Vmax 100 nA9
Output low voltage range of the FB/INT pin VFB/INT_LSinking 4mA currenttyp 0.03 · max 0.1 V9
Thermal shutdown threshold TSDTJ risingtyp 175 °C9
Thermal shutdown hysteresis TSD_HYSTJ falling below TSDtyp 20 °C9
SCL clock frequency fSCLmin 100 · max 1000 kHz9
Bus free time between a STOP and START condition tBUFFast mode plusmin 0.5 us9
Hold time (repeated) START condition tHD(STA)min 260 ns9
Low period of the SCL clock tLOWmin 0.5 us9
High period of the SCL clock tHIGHmin 260 ns9
Setup time for a repeated START condition tSU(STA)min 260 ns9
Data setup time tSU(DAT)min 50 ns9
Data hold time tHD(DAT)min 0 us9
Rise time of SCL signal tRCLmax 120 ns9
Rise time of SCL signal after a repeated START condition and after an ACK bit tRCL1max 120 ns9
Fall time of SCL signal tFCLmax 120 ns9
Rise time of SDA signal tRDAmax 120 ns9
Fall time of SDA signal tFDAmax 120 ns9
Setup time of STOP condition tSU(STO)min 260 ns9
Capacitive load for SDA and SCL CBmax 200 pF9

Pins, by the datasheet

26
1 DR1L
Gate driver output for low-side MOSFET in buck side. · p. 3
2 DR1H
Gate driver output for high-side MOSFET in buck side. · p. 3
3 VIN
Input power supply for the IC. · p. 3
4 EN/UVLO
Enable and programmable input undervoltage lockout input; high enables, low shuts down; above 1.15 V acts as UVLO input with 1.23-V internal reference. · p. 3
5 SCL
Clock of I2C interface. · p. 3
6 SDA
Data of I2C interface. · p. 3
7 DITH/SYNC
Capacitor to ground sets dithering frequency; grounding or pulling above 1.2 V disables dithering; accepts external switching synchronization clock. · p. 3
8 FSW
Resistor to AGND programs switching frequency. · p. 3
9 PGND
Power ground connected to the source of the low-side MOSFET. · p. 3
10 AGND
Signal ground of the IC. · p. 3
11 VOUT
Output of the buck-boost converter. · p. 3
12 ISP
Positive current sense amplifier input; optional resistor to ISN sets output current sensing; connect ISP and ISN to VOUT to disable output current limit. · p. 3
13 ISN
Negative current sense amplifier input; optional resistor to ISP enables output current sensing; connect ISP and ISN to VOUT to disable output current limit. · p. 4
14 FB/INT
External feedback divider center tap, or fault indicator output that goes low on an internal fault when internal feedback is selected. · p. 4
15 MODE
Resistor to AGND selects PFM or forced PWM, internal LDO or external 5 V for VCC, and I2C address. · p. 4
16 CDC
Voltage proportional to ISP–ISN sense voltage; resistor to AGND sets cable voltage droop compensation. · p. 4
17 ILIM
Average inductor current limit setting; connect external resistor to AGND. · p. 4
18 COMP
Internal error amplifier output; connect loop compensation network to AGND. · p. 4
19 VCC
Internal regulator output; requires ceramic capacitor greater than 4.7 uF to AGND. · p. 4
20 BOOT2
Boost high-side MOSFET gate driver supply; connect 0.1 uF ceramic capacitor to SW2. · p. 4
21 SW2
Boost switching node connected to internal low-side MOSFET drain and internal high-side MOSFET source. · p. 4
22 BOOT1
Buck high-side MOSFET gate driver supply; connect 0.1 uF ceramic capacitor to SW1. · p. 4
23 SW1
Buck switching node connected to external low-side MOSFET drain and external high-side MOSFET source. · p. 4
24 PGND
Power ground connected to the source of the low-side MOSFET. · p. 3
25 SW2
Boost switching node connected to internal low-side MOSFET drain and internal high-side MOSFET source. · p. 4
26 VOUT
Output of the buck-boost converter. · p. 3

Open-source boards using it

7
  • 2 layers72 × 26.7 mmLiPo charger Rev 1.0, the printed circuit board in 3D

    LiPo charger Rev 1.0

    marksdude/Pikne

    A modular and repairable power bank

    117 parts1
  • 4 layers58 × 49 mmCryocooler board, the printed circuit board in 3D

    Cryocooler board

    8423/cryocooler-board

    A 4-layer power and control board for a Ricor K508N cryocooler. It does two jobs, both controlled over I²C:

    54 parts
  • 6 layers133 × 102 mmIasis, the printed circuit board in 3D

    Iasis

    hydazz/iasis

    An optional Raspberry Pi Compute Module 5 carrier for Iasis. It plugs into the main board's HubPD population and carries Ethernet, NVMe storage, an accessory USB-C port and a service USB-C port.

    723 partsApache-2.0
  • 4 layers101.2 × 24 mmCharger module, the printed circuit board in 3D

    Charger module

    mikesmitty/power-manifold

    Six-port USB-C power supply: up to 100 W per port from one 24 V supply, with per-port control, priority-based power sharing and Home Assistant support. 100% local, no cloud required.

    90 parts3MIT
  • 4 layers100 × 100 mmCarradio peripheral rev05, the printed circuit board in 3D

    Carradio peripheral rev05

    gschuurman/android_vendor_gschuurman_vehicle_interfaces

    vehicle interfaces for android automotive for a custom headunit

    211 parts
  • 4 layers107.2 × 83.8 mmPd test, the printed circuit board in 3D

    Pd test

    Yuan-Quan/pet-climate-control

    74 parts
  • 2 layers60 × 30.1 mmTPS55289, the printed circuit board in 3D

    TPS55289

    zOnlyKroks/pcb-consortium

    36 partsCC0-1.0

Parts like it

4

Questions

Is there a KiCad symbol and footprint for the TPS55288RPMR?

Yes. The symbol is EasyEDA_Cloud:TPS55288RPMR and the footprint EasyEDA_Cloud:VQFN-HR-26_L4.0-W3.5_TPS55288RPMR, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS55288RPMR?

VQFN-26-HR(3.5x4), with 26 pins. Its footprint is drawn on this page.

Where is the TPS55288RPMR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS55288RPMR?

JLCPCB lists it as part C2864583, with 4,376 in stock; the sellers' links on this page open their listings.

What can replace the TPS55288RPMR?

Parts like it in the library: the TPS552882RPMR by Texas Instruments, the TPS55288QRPMRQ1 by Texas Instruments, the TPS552882QRPMRQ1 by Texas Instruments and the TPS552882QWRPMRQ1 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS55288RPMR?

7 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.