Skip to the content
6 layers44 × 94 mmPS FLYBACK-5W, the printed circuit board in 3D

KiCad extension for the copper you can't buy as a part — design planar inductors, transformers, PCB motor stators, filters, and antennas, with electrical modeling and direct write-back to your board.

Size
44 × 94 mm
Copper layers
6
Thickness
1.61 mm
Parts
29
Nets
17
Pads
69
Tracks, vias
77, 61
Pours
4
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
7 Sep 2026
Updated
20 Oct 2026

Overview

PS FLYBACK-5W is an open-source printed circuit board by jonahsaunders, from the jonahsaunders/planar-studio repository on GitHub, published under the MIT licence. It is a 6-layer board of 44 × 94 mm with 29 parts on 17 nets, routed with 77 tracks and 61 vias.

It is built around the LT8302IS8E#PBF, CL32B106KBJNNNE and 16SVPF180M, with the SF-1206F100-2, RT0603BRD0710K7L and RT0603BRD07113KL among its other parts. Its parts include 8 capacitors, 8 resistors, 4 diodes, 2 connectors and 1 IC. It belongs with the radio and wireless and robots and motor control boards of this library.

Main components

12

README

README.md

Planar Studio

installer KiCad 9.0.1+ MIT license

Design planar inductors, transformers, PCB motors, filters and antennas inside KiCad. Planar Studio reads your board's stack, calculates electrical estimates, and places the generated copper into the PCB as one undoable operation.

Download v1.6.0 · Install · Guides · Common PCB issues · Flyback example · GaN example · CoilTile example

Five workspaces: inductors, transformers, PCB motors, filters and antennas

Explore the workspaces

Current application captures. Click a view to open the full-size image.

Inductors

Two parallel inductor layers with inductance, resistance and frequency-response readouts

Shape windings, connect layers and route around obstacles.
Winding guide →

Transformers

Ferrite transformer copper, winding connections and core cross-section

Build ferrite stacks, compare candidates and verify operating limits.
Transformer guide →

PCB motors

Twelve-coil rotary stator with phase phasors and motor estimates

Explore rotary, stepper, linear, dual-rotor and planar machines.
See all five motor families →

Filters

Hairpin filter geometry with calculated transmission and reflection

Turn LC and microstrip networks into copper and response plots.
Filter models →

Antennas

Patch array with element dimensions and ideal array-factor plot

Design patches, arrays, directional radiators and NFC loops.
Explore antenna layouts →

Design tools

Calculated magnetic-field map in the Design tools workspace

Inspect fields, optimize geometry and compare measurements.
Design tools guide →

Open the full 15-image gallery → — obstacle routing, transformer search, motor families, antenna variants and both interface themes.

Save editable designs, compare calculated responses, and export KiCad boards or footprints, SVG, DXF, JSON and specification sheets. The Design tools panel adds constrained searches, measurement overlays, tolerance studies and board checks; see the tools guide.

Install

The 1.6.0 development release supports KiCad 9.0.1 or newer on Windows, macOS and Linux. Release notes.

  1. Download planar-studio-1.6.0.zip and leave it zipped.
  2. In KiCad's main Project Manager, open Plugin and Content Manager.
  3. Choose Install from File, select the ZIP and apply pending changes.
  4. Restart KiCad, open the PCB Editor, and launch Planar Studio after its Python environment finishes setting up.
Upgrading or getting a metadata error?

To upgrade, close Planar Studio and the PCB Editor. In Plugin and Content Manager → Installed, uninstall the old version and apply pending changes before installing the new ZIP. Saved designs are stored separately; preserve the settings folder.

Use the installer linked above. GitHub's Code → Download ZIP and Source code archives contain the repository, not a PCM installer.

5 W planar flyback example

A10 retains the winding-short repair, increases measured turn gaps to about 0.289 mm, enlarges T1 annular rings and removes tangent secondary-via contacts. Independent geometry, connection-width and full copper/mask Gerber checks protect these changes. Use the A10 package and the common PCB issues reference when reviewing or editing the design.

KiCad render of the assembled planar flyback converter

An 18–36 V DC to isolated 5 V / 1 A converter with an LT8302 controller and transformer windings built into a six-layer PCB. The example includes a KiCad 10 project, schematic, BOM, calculations and single-board manufacturing files for JLCPCB-managed panelization.

Unbuilt engineering prototype. Factory acceptance and electrical, thermal and magnetic qualification remain open.

Explore the board and schematic · Review package · Validation record

60 W GaN planar LLC example

KiCad render of PS-GAN-60W with planar magnetics, removable screw-terminal ports and M3 mounting holes

A 48 V nominal to isolated 12 V / 5 A target using an integrated GaN half bridge, silicon synchronous rectifiers and an eight-layer PCB transformer. The 64 × 56 mm chamfered board has all electronics on top, removable screw-terminal ports, and the flyback example's exposed-substrate M3 hole geometry on a 55 × 47 mm pattern. The A10 schematic uses visible local wiring and has no four-way connections. The accompanying MIT PER and video studies explain the layout decisions. An 82-reference ratings audit records the corrected parts and outstanding electrical limits.

Unbuilt engineering prototype. ERC, DRC, connectivity, assembly-file agreement and a portable rebuild pass. Factory DFM, ferrite installation and electrical, magnetic and thermal qualification remain open. 60 W is not a measured result.

Manufacturing audit: do not order the current revision. The five-board review found overlapping same-net component lands, incomplete courtyards, GaN stencil/mask and placement-origin issues, and a factory stack mismatch. The audit and cost breakdown record required corrections and unconfirmed turnkey operations.

Explore the native KiCad example · KiCad package · Layout resource review · PER design study · Validation record

CoilTile USB inductive sensing example

CoilTile assembled PCB layout

A 2 × 2 near-field metal-sensing array using four printed coils generated by Planar Studio, an LDC1614 converter and an MCP2221A USB bridge. The A3 schematic shows one continuous USB → I²C → sensor → LC-tank signal path. The 72 × 90 mm four-layer PCB reuses the flyback/GaN examples' exposed-substrate M3 edge holes.

Includes editable KiCad 9 files, a Python heatmap and CSV logger, an exact-code JLCPCB BOM/CPL, Gerbers, and bring-up instructions. No firmware flashing is needed. Unbuilt prototype: native ERC/DRC and connectivity checks pass; physical sensing range, crosstalk and supplier assembly acceptance remain unverified.

Explore CoilTile · Schematic PDF · A3 review · Assembly handoff

Guides

Calculated performance depends on the selected model. Review its assumptions and validate the resulting hardware with appropriate simulation, KiCad DRC and measurements. Transformer loss or thermal results that cannot be calculated are reported as unknown.

Built on planar-coil-studio. Released under the MIT license.

Parts

29
QtyValueFootprintReferences
4M3 / 3.2 mm NPTHamemb-MountingHole:MountingHole_3.2mm_M3_ExposedSubstrate_EdgeH1, H2, H3, H4
210u 50V X7RFlyback:C_1210_3225MetricC1, C2
2180u 16VFlyback:CP_Panasonic_C6C3, C8
2DFLS1100-7Flyback:D_PowerDI-123D1, D3
11 A / 63 V DC fastFlyback:Fuse_Bourns_SF1206FF1
110.7k 0.1%Flyback:R_0603_1608MetricR4
1113k 0.1%Flyback:R_0603_1608MetricR3
1127k 0.1%Flyback:R_0603_1608MetricR5
118-36 V DCFlyback:Terminal_KF301_2P_5.00J1
1180R 0.25 WFlyback:R_1206_3216MetricR7
12.2R 2 WFlyback:R_Bourns_CRM2512R8
122u 16V X7RFlyback:C_1210_3225MetricC4
139R 2 WFlyback:R_EverOhms_CRH2512R6
14.7u / 16 V X5RFlyback:C_0603_1608MetricC5
1470p / 100 V C0GFlyback:C_0805_2012MetricC6
147u / 63 VFlyback:CP_Elec_8x10.5C7
15 V / 1 A isolatedFlyback:Terminal_KF301_2P_5.00J2
161.9k 1%Flyback:R_0603_1608MetricR2
1649k 1%Flyback:R_0603_1608MetricR1
1LT8302IS8E#PBFFlyback:SOIC8_EP_LT_S8EU1
1PDS835L-13Flyback:D_PowerDI-5D2
1PLANAR 4:2 / Lm 13.12uHFlyback:Planar_EELP22_4T_2TT1
1SMAJ12A-13-FFlyback:D_SMAD4

More from jonahsaunders/planar-studio

2
  • 8 layers64 × 56 mmPS GAN-60W, the printed circuit board in 3D

    PS GAN-60W

    jonahsaunders/planar-studio

    KiCad extension for the copper you can't buy as a part — design planar inductors, transformers, PCB motor stators, filters, and antennas, with electrical modeling and direct write-back to your board.

    89 parts4MIT
  • 4 layers72 × 90 mmCoilTile, the printed circuit board in 3D

    CoilTile

    jonahsaunders/planar-studio

    KiCad extension for the copper you can't buy as a part — design planar inductors, transformers, PCB motor stators, filters, and antennas, with electrical modeling and direct write-back to your board.

    32 parts4MIT

Similar boards

  • 4 layers100 × 100 mmRpi pico printer board, the printed circuit board in 3D

    Rpi pico printer board

    jackw01/pi-pico-printer-board

    Tinkerer-friendly Klipper compatible 3D printer control board using Raspberry Pi Pico

    224 parts42CERN-OHL-W-2.0
  • 6 layers133 × 102 mmIasis, the printed circuit board in 3D

    Iasis

    hydazz/iasis

    An optional Raspberry Pi Compute Module 5 carrier for Iasis. It plugs into the main board's HubPD population and carries Ethernet, NVMe storage, an accessory USB-C port and a service USB-C port.

    723 partsApache-2.0
  • 2 layers100 × 100 mmCTRL, the printed circuit board in 3D

    CTRL

    DD1SB/ARDF-TX

    Date: 2026-10-15. Engineering review only; unbuilt and unenergized. Open RF80.kicadpro, schematic and native PCB in KiCad10.0.6. Three primary PCBs and the separate VHF true-AM design are unchanged.

    256 partsMIT
  • 4 layers174 × 147 mmMidplate, the printed circuit board in 3D

    Midplate

    sfunderbots/Electrical

    PCB etc.

    61 parts
  • 4 layers100 × 100 mmCheap version, the printed circuit board in 3D

    Cheap version

    nikolajevs/ai

    Открыть PCBV1.kicadpro в KiCad 10. После обновления репозитория перечитать открытый проект с диска перед сохранением.

    170 parts
  • 4 layers100 × 100 mmPCB EU LITE, the printed circuit board in 3D

    PCB EU LITE

    nikolajevs/PCB_EU

    Сохраняются функции PCBV1: два LED-канала с общей яркостью, два независимых PWM/тахоканала вентиляторов, PTC, помпа, SHT4x, поплавок, RTC с CR2032, microSD, Wi-Fi и существующие функции интерфейса/расписаний.

    167 parts
  • 4 layers449.2 × 272.9 mmWpc power driver cost, the printed circuit board in 3D

    Wpc power driver cost

    lolz0r/Williams-WPC-Power-Driver-Board-A-12697-3

    Untested, unverifed, AI created design.

    453 parts2
  • 4 layers222 × 100 mmHydroScan V1, the printed circuit board in 3D

    HydroScan V1

    paulmartinezcuenta/Proyecto_finales_mecatronica_ITLA

    Monorepo for two mechatronics projects sharing a panelized PCB: HydroScan (autonomous IoT maritime buoy with LTE, GPS, and solar power) and AUTOAMBU (automated medical respirator prototype with DC control and USB fast…

    156 parts1

Questions

How big is the PS FLYBACK-5W PCB?

It measures 44 × 94 mm and has 6 copper layers, 1.61 mm thick.

What parts does the PS FLYBACK-5W use?

29 parts, built around the LT8302IS8E#PBF, CL32B106KBJNNNE, 16SVPF180M and SF-1206F100-2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PS FLYBACK-5W KiCad files?

From the jonahsaunders/planar-studio repository on GitHub, at the commit this page was made from: the board is examples/planar-flyback-5w/kicad/PS-FLYBACK-5W.kicad_pcb and its schematic examples/coil-tile/kicad/CoilTile.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PS FLYBACK-5W design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).