Boards using the THVD1450D

15 boards

Boards in 13 GitHub repositories, designed in KiCad, that use the THVD1450D by Texas Instruments (-40℃~+125℃ 1 1 256 3V~5.5V 3mA 50Mbps Half-Duplex Transceiver ±18kV SOIC-8 RS-485 / RS-422 ICs ROHS). See how each wires it, with its parts, size, README and files; the THVD1450D’s symbol, footprint and pinout are on its own page.

4 layers50 × 50 mm
Industrial Encoder Node
anushakatikireddy/STM32-Industrial_Encoder_Node
Compact industrial encoder node designed for reliable position sensing and communication in robotics and motion control applications, developed as a complete hardware solution in KiCad.
49 parts
4 layers94 × 94 mm
Walter feels
benmcnelly/walter-hardware
This repository contains all hardware information about Walter and shields
154 partsGPL-3.0
4 layers230 × 135 mm
Vancontroller
Camperlux/vancontroller
VanController: ESP32-S3 12 V campervan controller board (6 fused relays, 6 PWM dimmers, CAN, RS485, GPS) - KiCad 10 design, manufacturing files and enclosure. Free for non-commercial use.
259 parts
2 layers50 × 50 mm
Digital Humidity Gauge
embeddedalpha/Digital-Humidity-Gauge
🎯 Dry‑bulb Temperature 🎯 Relative humidity 🎯 Barometric pressure 🎯 Saturation vapour pressure 🎯 Actual vapour pressure 🎯 Humidity (mixing) ratio 🎯 Absolute humidity 🎯 Dew‑point temperature 🎯 Wet‑bulb…
68 parts
4 layers61.9 × 84.4 mm
FastStepper
harp-tech/device.faststepper
A fast moving stepper motor controller device, with acceleration, jerk control, and end stop support
141 parts
2 layers89.8 × 21.5 mm
Differential SPI Adapter
koki0517/Differential-SPI-Adapter

23 partsCC-BY-SA-4.0
4 layers104 × 104 mm
HomeAutomation pi
PragyanSenDeka/RaspberryPiPicoBasedHomeAutomationPCB
Home automation node based on Raspberry Pi Pico W with WiFi and RS485/MODBUS. Features DIP-switch addressing, SHT31 temperature/humidity sensor, QWIIC I2C, RGB LED, buttons, SPI expansion, and a 230V 16A relay.
58 parts
4 layers100 × 100 mm
Artnet node poe
Tommie1236/artnet-node-poe

134 partsMIT
2 layers40 × 18.5 mm
Jvs
darthcloud/BlueRetroHW
Kicad for BlueRetro project
19 parts61
2 layers41 × 32.2 mm
Usb uart
absmach/synth
Open-source circuit compiler for engineers and AI agents
36 parts29Apache-2.0
4 layers94 × 94 mm
Walter feels
jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.
153 parts4
6 layers146 × 30 mm
HG1-PWR
ajisrawi/hologuard-hg1-radar
HoloGuard HG-1: Ku-band GaN 4D holographic (staring MIMO) counter-UAS radar in an EchoGuard-size envelope - system design, antenna, KiCad boards, FreeCAD enclosure, Blender renders, firmware
67 parts2
4 layers150 × 130 mm
SENTINEL CLOCK
ajisrawi/sentinel-uhf-radar
Reference design of a two-face UHF early-warning phased-array radar: system sizing, MoM antenna simulation, seven KiCad PCB projects, Blender site model
63 parts
4 layers300 × 185 mm
SENTINEL PSU
ajisrawi/sentinel-uhf-radar
Reference design of a two-face UHF early-warning phased-array radar: system sizing, MoM antenna simulation, seven KiCad PCB projects, Blender site model
56 parts
4 layers320 × 260 mm
SENTINEL TILE
ajisrawi/sentinel-uhf-radar
Reference design of a two-face UHF early-warning phased-array radar: system sizing, MoM antenna simulation, seven KiCad PCB projects, Blender site model
118 parts