Skip to the content

Boards using the TCAN3413DRB

17 boards

Boards in 13 GitHub repositories, designed in KiCad, that use the TCAN3413DRB by Texas Instruments (-40℃~+125℃ 1 13uA 3V~3.6V 55mA 8Mbps CAN Transceiver SON-8-EP(3x3) CAN Transceivers ROHS). See how each wires it, with its parts, size, README and files; the TCAN3413DRB’s symbol, footprint and pinout are on its own page.

  • 4 layers50 × 60 mmPiCCANTE OBD Dongle, the printed circuit board in 3D

    PiCCANTE OBD Dongle

    Alia5/PiCCANTE

    PiCCANTE is a powerful tool for exploring and reversing CAN busses of vehicles, based on Raspberry Pi Pico (any model)

    35 parts104GPL-3.0
  • 2 layers72 × 22 mmCANFDtoUSB V1, the printed circuit board in 3D

    CANFDtoUSB V1

    AmalRajKC/SylionX

    An open source USB to CAN FD adapter for real-time CAN bus monitoring, diagnostics, and frame injection.

    42 parts4CERN-OHL-S-2.0
  • 4 layers100 × 100 mmPS BPSLeader, the printed circuit board in 3D

    PS BPSLeader

    lhr-solar/PS-BPSLeader

    Reads voltage, temperature, and current of the main battery pack from the Segment Monitoring Board and HV Carrier boards to ensure the battery remains in a safe state.

    388 parts3MIT
  • 2 layers87.4 × 70 mmSdm27ev vcu v1, the printed circuit board in 3D

    Sdm27ev vcu v1

    sundevilmotorsports/ev-pcb-dev

    PCB development repository SDM EV

    253 parts3
  • 4 layers52 × 74 mmFRC Sensor CAN, the printed circuit board in 3D

    FRC Sensor CAN

    barkinvar/sugerCANe

    A compact interface for three NPN, PNP or logic sensors on an FRC robot. Each port has a removable 5 V / 12 V power jumper; input type is configured in software.

    144 parts1
  • 4 layers53.9 × 53.3 mmCanfdshield, the printed circuit board in 3D

    Canfdshield

    feaser/canfdshield

    Arduino shield with 3.3V CAN FD Transceiver for STM32 Nucleo boards

    18 parts1MIT
  • 4 layers52 × 51 mmDARPA MCTR, the printed circuit board in 3D

    DARPA MCTR

    Alsa2/ThumbMuncher

    Darpa Lift Challenge Code Repo

    100 parts
  • 4 layers50 × 80 mmHPR FC G474 3S, the printed circuit board in 3D

    HPR FC G474 3S

    itsTasos/InvictusOne-Flight-Computer

    KiCad hardware design for an STM32G474-based flight-data computer for high-power model rockets, with inertial and pressure sensors, CAN-FD, and onboard flash storage.

    127 parts
  • 2 layers115.6 × 115.7 mmPS HVCarrier, the printed circuit board in 3D

    PS HVCarrier

    lhr-solar/PS-HVCarrierPCB

    Measures pack current using a low-side shunt resistor

    298 parts
  • 4 layers147.8 × 125.4 mmPS PowerDistributionUnit, the printed circuit board in 3D

    PS PowerDistributionUnit

    lhr-solar/PS-PowerDistributionUnit

    Controls and monitors LV power outputs using programmable high-side switches

    328 parts
  • 2 layers33.5 × 17.1 mmTTLtoCANforTOF, the printed circuit board in 3D

    TTLtoCANforTOF

    QDU-Robomaster/TTLtoCAN

    电源部分通过 TPS54202 将输入电源降压至设计目标 5V,再由 ME6211 产生板上 3.3V。STM32 连接 ToF 的 UART,并通过 CAN 收发器接入总线。通信转换需要配套固件,当前仓库未提供固件及协议定义。

    44 parts
  • 4 layers52 × 64 mmPrerouted, the printed circuit board in 3D

    Prerouted

    barkinvar/sugerCANe

    A compact interface for three NPN, PNP or logic sensors on an FRC robot. Each port has a removable 5 V / 12 V power jumper; input type is configured in software.

    124 parts1
  • 4 layers52 × 51 mmDARPA MCTR, the printed circuit board in 3D

    DARPA MCTR

    Alsa2/ThumbMuncher

    Darpa Lift Challenge Code Repo

    94 parts
  • 4 layers151.8 × 30.8 mmBackplane, the printed circuit board in 3D

    Backplane

    kquinsland/modular-rack-mount-power-system

    Hardware, firmware, and host tooling for a modular mini-rack power system.

    91 parts
  • 4 layers100 × 34.9 mmCarrier, the printed circuit board in 3D

    Carrier

    kquinsland/modular-rack-mount-power-system

    Hardware, firmware, and host tooling for a modular mini-rack power system.

    84 parts
  • 2 layers30 × 30 mmMotor control, the printed circuit board in 3D

    Motor control

    neurobot-1000/neurobot-1000.github.io

    Monorepo for the Neurobot-1000 works

    6 partsBSD-3-Clause-Clear