

Sdm27ev vcu v1
PCB development repository SDM EV
- Size
- 87.4 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 253
- Nets
- 284
- Pads
- 881
- Tracks, vias
- 483, 46
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 24 Sep 2026
- Updated
- 5 Nov 2026
Overview
Sdm27ev vcu v1 is an open-source printed circuit board by sundevilmotorsports, from the sundevilmotorsports/ev-pcb-dev repository on GitHub. It is a 2-layer board of 87.4 × 70 mm with 253 parts on 284 nets, routed with 483 tracks and 46 vias.
It is built around the TCAN3413DRB, TLV9064IRUCR and LMR51450FSQDRRRQ1, with the TPD4E05U06QDQARQ1, MCP2518FDT-E/SL-HX and TLP293-4(E among its other parts. Its parts include 112 resistors, 64 capacitors, 36 diodes, 21 ICs and 8 transistors.
Main components
12TCAN3413DRB
SON-8-EP(3x3)-40℃~+125℃ 1 13uA 3V~3.6V 55mA 8Mbps CAN Transceiver SON-8-EP(3x3) CAN Transceivers ROHSTexas InstrumentsCAN TransceiversTLV9064IRUCR
QFN-14(2x2)-40℃~+125℃ 0.05pA 0.5pA 1.6mV 1.8V~5.5V 10MHz 16nV/√Hz@1kHz 4 50mA 530nV/℃ 538uA 6.5V/us 87dB Enable/shutdown function、ESD protection、EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output QFN-14(2x2) Operational Amplifier ROHSTexas InstrumentsOperational AmplifierLMR51450FSQDRRRQ1
WSON-12(3x3)WSON-12(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPD4E05U06QDQARQ1
USON-10(1x2.5)-40℃~+125℃@(Ta) 0.5pF 10nA 14V 2.5A@8/20us 40W@8/20us 5.5V 6.4V、8.7V ESD Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Unidirectional USON-10(1x2.5) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)MCP2518FDT-E/SL-HX
SOIC-14SOIC-14 CAN Controllers ROHSZHHXDZCAN ControllersTLP293-4(E
SOIC-16-4.6mmTransistor, Photovoltaic Output OptoisolatorsToshibaTLV76733QWDRBRQ1
SON-8(3x3)-40℃~+125℃@(Tj) 1 1.4V@(1A) 16V 1A 3.3V 60uVrms 70dB@(1kHz) 95uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Output discharge、Built-in soft-start Positive SON-8(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPS2121RUXR
VQFN-HR-12(2x2.5)-40℃~+125℃ 2.8V~22V 200uA 56mΩ VQFN-HR-12(2x2.5) ORing Controllers ROHSTexas InstrumentsBattery ManagementBAT54WS-7-F-CN
SOD-323SOD-323 Schottky Diodes ROHSChipNoboSchottky DiodesDMN62D2UWQ
SOT323UncategorisedDiodes IncorporatedPUSB3FR6Z
XSON-7(1.2x2.2)-40℃~+85℃ 0.35pF 1nA 3.3V 3V 6 6V 7A@8/20us ESD XSON-7(1.2x2.2) ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)USB4725-03-C-KIT
-- Lack of specifications ROHSGlobal Connector Technology (GCT)Uncategorised
Parts
253| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C11, C15, C17, C22, C23, C24, C26, C32, C34, C107 +10 |
| 22 | 100 | Resistor_SMD:R_0603_1608Metric | R4, R5, R6, R10, R12, R13, R15, R16, R17, R18, R19, R81, R82, R106, R107, R108 +6 |
| 21 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R42, R46, R47, R48, R49, R52, R53, R54, R55, R56, R57, R58, R179, R181, R183 +5 |
| 16 | 10k | Resistor_SMD:R_0603_1608Metric | R7, R8, R9, R14, R38, R43, R80, R87, R104, R105, R127, R129, R131, R133, R135, R137 |
| 12 | BAT54WS-7-F | SDM:SOD2513X120N | D3, D4, D5, D9, D10, D11, D12, D21, D22, D23, D24, D27 |
| 12 | PESD24VL1BLS-QYL | SDM_EV:PESD24VL1BLSQYL-Compact | D1, D6, D7, D8, D25, D26, D28, D29, D30, D31, D32, D33 |
| 11 | 1uF | Capacitor_SMD:C_0603_1608Metric | C8, C19, C20, C21, C31, C33, C35, C36, C37, C38, C39 |
| 9 | 100k | Resistor_SMD:R_0603_1608Metric | R20, R21, R22, R23, R28, R29, R35, R36, R41 |
| 8 | 10n | Capacitor_SMD:C_0603_1608Metric | C91, C92, C93, C94, C95, C96, C97, C98 |
| 8 | 17.8K | Resistor_SMD:R_0603_1608Metric | R40, R44, R128, R130, R132, R134, R136, R138 |
| 8 | 20.5nF | Capacitor_SMD:C_0603_1608Metric | C99, C100, C101, C102, C103, C104, C105, C106 |
| 8 | 4.75k | Resistor_SMD:R_0603_1608Metric | R98, R99, R100, R101, R102, R103, R125, R126 |
| 8 | 6.49k | Resistor_SMD:R_0603_1608Metric | R90, R91, R92, R93, R94, R95, R96, R97 |
| 8 | DMN62D2UWQ | Package_TO_SOT_SMD:SOT-323_SC-70 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 8 | PESD24VL1BLS-QYL | SDM_EV:PESD24VL1BLSQYL | D13, D14, D15, D16, D17, D18, D19, D20 |
| 4 | 10K | Resistor_SMD:R_0603_1608Metric | R3, R45, R64, R65 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric | C13, C14, C16, C18 |
| 3 | 5k | Resistor_SMD:R_0603_1608Metric | R25, R27, R31 |
| 3 | TCAN3413DR | SDM_EV:SOIC127P600X175-8N | IC6, IC8, IC9 |
| 3 | TLP175A_TPL,E | SDM:TLP266J | IC10, IC11, IC12 |
| 3 | TLV9064IRUCR | SDM_EV:QFN40P200X200X40-14N | IC7, U17, U18 |
| 2 | 21k | Resistor_SMD:R_0603_1608Metric | R26, R30 |
| 2 | 25k | Resistor_SMD:R_0603_1608Metric | R33, R34 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R50, R51 |
| 2 | 33uF | Capacitor_SMD:C_0805_2012Metric | C29, C30 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C25, C28 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R11, R79 |
| 2 | 600Ohm@100MHz ~1.4A | Inductor_SMD:L_0805_2012Metric | FB1, FB2 |
| 2 | 6437288-4 | SDM_EV:64372884 | J3, J6 |
| 2 | GREEN | SDM:SSFLXH100LID01 | LED2, LED3 |
| 2 | MAX20087ATPB_VY+T | SDM_EV:QFN50P400X400X80-21N-D | IC1, IC4 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_CK_KXT3 | SW1, SW2 |
| 2 | TLV9062xDSG | Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm_ThermalVias | U2, U4 |
| 2 | TPD4E05U06QDQARQ1 | SDM_EV:DQA_R-PUSON-N10_ | IC20, IC24 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 10k | Resistor_SMD:R_Array_Convex_4x0603 | RN5 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 16.2 | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | 19.1k | Resistor_SMD:R_0603_1608Metric | R39 |
| 1 | 2201778-1 | SDM_EV:22017781 | J4 |
| 1 | 24.2k | Resistor_SMD:R_0603_1608Metric | R32 |
| 1 | 33pF | Capacitor_SMD:C_0603_1608Metric | C27 |
| 1 | 34.8k | Resistor_SMD:R_0603_1608Metric | R37 |
| 1 | 4.7uH | Inductor_SMD:L_SXN_SMDRI62 | L3 |
| 1 | ECS-3225MVQ-400-BS-TR | SDM_EV:ECS3225MVQ400BSTR | Y1 |
| 1 | LMR51450FSQDRRRQ1 | SDM_EV:SON50P300X300X80-13N-D | U20 |
| 1 | MCP2518FDT-E_SL | SDM_EV:SOIC127P600X175-14N | IC5 |
| 1 | NetTieGND | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | PUSB3FR6Z | SDM:PUSB3FR6Z | D2 |
| 1 | RED | SDM:SSFLXH100LID01 | LED1 |
| 1 | TLP293-4 | Package_SO:SOIC-16_4.55x10.3mm_P1.27mm | U3 |
| 1 | TLV76733QWDRBRQ1 | SDM_EV:SON65P300X300X100-9N-D | IC3 |
| 1 | TPS2121RUXR | SDM_Misc:TPS2121RUXR | IC2 |
| 1 | USB4725-03-C-KIT | SDM_Misc:GCT_USB4730-GF-A_REVA | J5 |
| 1 | WT0132P4-A1 | SDM_EV:WT0132P4-A1 | U1 |
More from sundevilmotorsports/ev-pcb-dev
12- 4 layers68 × 83.4 mm

- 2 layers40 × 90 mm

- 2 layers61.3 × 86.9 mm

- 2 layers52.1 × 90.2 mm

- 4 layers92.5 × 65 mm

- 2 layers50.9 × 56.9 mm

- 2 layers75 × 80 mm

- 2 layers33 × 32.5 mm

- 2 layers56.9 × 54.6 mm

- 2 layers48 × 34 mm

- 2 layers45.6 × 49.9 mm

- 2 layers61.3 × 31.2 mm

Similar boards
- 4 layers37 × 22 mm

- 2 layers

- 2 layers19 × 40 mm

- 2 layers28.4 × 22.5 mm

Buck converter
alegoldstein/NUSTARS
Payload PCB for Northwestern University's 2025-2026 IREC rocket
14 parts - 4 layers100 × 100 mm

PS BPSLeader
lhr-solar/PS-BPSLeader
Reads voltage, temperature, and current of the main battery pack from the Segment Monitoring Board and HV Carrier boards to ensure the battery remains in a safe state.
388 parts3MIT - 6 layers82 × 155 mm

- 6 layers80 × 49 mm

ButterStick
butterstick-fpga/butterstick-hardware
Basic ECP5 based GigE to SYZYGY interface.
256 parts225 - 6 layers57 × 25.9 mm

R7FS7MOD
Brazil-L/Lumeward-OpenSource
Open-source Lumeward firmware and development tools
228 parts2Apache-2.0
Questions
How big is the Sdm27ev vcu v1 PCB?
It measures 87.4 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sdm27ev vcu v1 use?
253 parts, built around the TCAN3413DRB, TLV9064IRUCR, LMR51450FSQDRRRQ1 and TPD4E05U06QDQARQ1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sdm27ev vcu v1 KiCad files?
From the sundevilmotorsports/ev-pcb-dev repository on GitHub, at the commit this page was made from: the board is sdm27ev/sdm27ev-vcu/hardware/sdm27ev-vcu-v1/sdm27ev-vcu-v1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sdm27ev vcu v1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask sundevilmotorsports before reusing the design.