
PS BPSLeader
lhr-solar/PS-BPSLeader
Reads voltage, temperature, and current of the main battery pack from the Segment Monitoring Board and HV Carrier boards to ensure the battery remains in a safe state.

Controls and monitors LV power outputs using programmable high-side switches
PS PowerDistributionUnit is an open-source printed circuit board by lhr-solar, from the lhr-solar/PS-PowerDistributionUnit repository on GitHub. It is a 4-layer board of 147.8 × 125.4 mm with 328 parts on 165 nets, routed with 1,419 tracks and 385 vias.
It is built around the TCAN3413DRB, WS2812B-2020 and PSMN012-100YS, with the CDSOT23-T24CAN and SMBJ15CA among its other parts. Its parts include 91 resistors, 75 capacitors, 49 diodes, 14 connectors and 13 fuses. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R4, R5, R15, R20, R25, R29, R33, R35, R39, R43, R45, R49, R53, R55 +12 |
| 18 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R27, R28, R34, R37, R38, R44, R47, R48, R54, R57, R58, R64, R67, R68, R74, R77 +2 |
| 18 | D_TVS | Diode_SMD:D_SMB | D10, D11, D12, D15, D16, D17, D20, D21, D22, D25, D26, D27, D30, D31, D32, D35 +2 |
| 16 | 22 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R6, R23, R24, R31, R32, R41, R42, R51, R52, R61, R62, R71, R72, R81, R82 |
| 14 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C34, C35, C40, C41, C46, C47, C52, C53, C58, C59, C64, C65, C70, C71 |
| 13 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C11, C12, C13, C20, C22, C23, C24, C25, C27, C29, C30, C31 |
| 13 | 5A | LHRS_Power:Fuse-3557-2 | F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, F13 |
| 13 | LED | LED_SMD:LED_0603_1608Metric | D7, D8, D9, D13, D14, D18, D19, D23, D24, D28, D29, D33, D34 |
| 12 | 24VOUT | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | TP31, TP32, TP34, TP35, TP37, TP38, TP40, TP41, TP43, TP44, TP46, TP47 |
| 12 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** |
| 12 | WS2812B-2020 | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D38, D39, D40, D41, D42, D43, D44, D45, D46, D47, D48, D49 |
| 10 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R19, R21, R22, R26, R36, R46, R56, R66, R76, R86 |
| 7 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C37, C43, C49, C55, C61, C67 |
| 6 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C8, C9, C15, C16, C17 |
| 6 | 10 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R30, R40, R50, R60, R70, R80 |
| 6 | 1n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C36, C42, C48, C54, C60, C66 |
| 6 | 2.2n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C38, C44, C50, C56, C62, C68 |
| 6 | 24V_VBB | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | TP30, TP33, TP36, TP39, TP42, TP45 |
| 6 | 470n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C33, C39, C45, C51, C57, C63 |
| 6 | CS_TP1 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP12, TP13, TP14, TP15, TP16, TP17 |
| 6 | Conn_01x02 | LHRS_Connectors:Molex_Nano-Fit_105309-xx02_1x02_P2.50mm_Vertical | J1, J2, J3, J4, J5, J6 |
| 6 | FLT_TP1 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP6, TP7, TP8, TP9, TP10, TP11 |
| 6 | TPS2HCS08AQPWPRQ1 | PDU_TPS2HCS08AQPWPRQ1:TPS2HCS08AQPWPRQ1 | IC3, IC4, IC5, IC6, IC7, IC8 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C7, C14 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R13, R87 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R91 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C21, C75 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C26, C28 |
| 2 | 22u | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C72, C73 |
| 2 | 26p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C18, C19 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R89, R90 |
| 2 | 60 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17, R18 |
| 2 | FerriteBead | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | FB1, FB2 |
| 2 | GND | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | TP19, TP20 |
| 2 | GND | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP21, TP22 |
| 2 | PSMN012-100YS | Package_TO_SOT_SMD:LFPAK56 | Q1, Q2 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C32 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 1 | 12V_PHSS | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | TP18 |
| 1 | 15.8k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 1 | 19.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R88 |
| 1 | 220n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | 3.3V | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | TP_3.3V1 |
| 1 | 3.3u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C74 |
| 1 | 33 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C69 |
| 1 | 5V | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | TP28 |
| 1 | 7.32k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 1 | 8.2u | LHRS_Passives:74439369082 | L1 |
| 1 | CAN1 | LHRS_Connectors:Molex_Nano-Fit_105309-xx03_1x03_P2.50mm_Vertical | J9 |
| 1 | CAN2 | LHRS_Connectors:Molex_Nano-Fit_105309-xx03_1x03_P2.50mm_Vertical | J10 |
| 1 | CAN_DEBUG | LHRS_Connectors:Molex_Nano-Fit_105309-xx04_1x04_P2.50mm_Vertical | J11 |
| 1 | CB | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | TP49 |
| 1 | CDSOT23-T24CAN | LHRS_Passives:CDSOT23-T24CAN | D4 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J14 |
| 1 | Crystal | LHRS_Passives:Crystal_SMD_Abracon_ABM3-2Pin_5.0x3.2mm | Y1 |
| 1 | DI_TP | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP4 |
| 1 | D_Schottky | Diode_SMD:D_SOD-123 | D55 |
| 1 | FB | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | TP50 |
| 1 | LHRs_LOGO | LHRS_Logos:LHRs_LOGO | G*** |
| 1 | LM74502DDFR | LHRS_Power:LM74502DDFR | IC1 |
| 1 | LMR51635XDDCR | LHRS_ICs:DDC0006A-MFG | U4 |
| 1 | LV_0UT2 | LHRS_Connectors:Molex_Nano-Fit_105310-xx12_2x06_P2.50mm_Vertical | J7 |
| 1 | LV_IN | LHRS_Connectors:AMASS_XT30UPB-M_1x02_P5.0mm_Vertical | J0 |
| 1 | LV_IN_PP | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | TP24 |
| 1 | LV_IN_RAW | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | TP23 |
| 1 | MCP1826S | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | PR_TP | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | TP27 |
| 1 | RGB_LED | LHRS_Special:RGB_LED | D5 |
| 1 | Reset | LHRS_Special:TL3365AF180QG | SW1 |
| 1 | SBA130CH-AU_R1_000A1 | Diode_SMD:D_SOD-323_HandSoldering | D1 |
| 1 | SMAF4758A | LHRS_Passives:SODFL5026X125N | D3 |
| 1 | SMBJ15CA | Diode_SMD:D_SMB | D2 |
| 1 | STM32G473CETx | LHRS_Special:48PinMCU | U3 |
| 1 | SW | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | TP51 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J13 |
| 1 | SWD_Header | LHRS_Connectors:SWD_Conn | J12 |
| 1 | SW_SPDT | LHRS_Special:BootSW | SW2 |
| 1 | TCAN3413DR | LHRS_Passives:TCAN3413DR | IC2 |
The 322 most common of 328 parts.

lhr-solar/PS-BPSLeader
Reads voltage, temperature, and current of the main battery pack from the Segment Monitoring Board and HV Carrier boards to ensure the battery remains in a safe state.



Alia5/PiCCANTE
PiCCANTE is a powerful tool for exploring and reversing CAN busses of vehicles, based on Raspberry Pi Pico (any model)

AmalRajKC/SylionX
An open source USB to CAN FD adapter for real-time CAN bus monitoring, diagnostics, and frame injection.


barkinvar/sugerCANe
A compact interface for three NPN, PNP or logic sensors on an FRC robot. Each port has a removable 5 V / 12 V power jumper; input type is configured in software.

feaser/canfdshield
Arduino shield with 3.3V CAN FD Transceiver for STM32 Nucleo boards
It measures 147.8 × 125.4 mm and has 4 copper layers, 1.71 mm thick.
328 parts, built around the TCAN3413DRB, WS2812B-2020, PSMN012-100YS and CDSOT23-T24CAN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lhr-solar/PS-PowerDistributionUnit repository on GitHub, at the commit this page was made from: the board is hardware/PS-PowerDistributionUnit.kicad_pcb and its schematic hardware/12VBuck.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask lhr-solar before reusing the design.