Skip to the content

Boards using the SN74LVC1G97DBVRE4

13 boards

Boards in 11 GitHub repositories, designed in KiCad, that use the SN74LVC1G97DBVRE4 by Texas Instruments (-40℃~+125℃ 1 1.65V~5.5V 10uA 2.4V、3.8V 24mA 24mA 400mV、550mV 6.3ns@3.3V 74LVC Configurable Multi-Function Gate SOT-23-6 Logic Gates ROHS). See how each wires it, with its parts, size, README and files; the SN74LVC1G97DBVRE4’s symbol, footprint and pinout are on its own page.

  • 2 layers69 × 100 mmSy99 8mbex, the printed circuit board in 3D

    Sy99 8mbex

    wohali/sy99_8mbex

    v1.0 - Fabricated July/August 2018 - has issues, do not use

    43 parts3
  • 4 layers58 × 75 mmTS VDAC A4, the printed circuit board in 3D

    TS VDAC A4

    andrewinsidelazarev/VDAC4

    Графический сопроцессор + HDMI конвертер для ZX Evolution / TS-Config + сетевая карта + звуковой модуль

    61 parts2MIT
  • 4 layers160 × 100 mmBench robotics controller 5eab0a5d, the printed circuit board in 3D

    Bench robotics controller 5eab0a5d

    mrcha033/hw-codesign

    Agentic hardware co-design: brief to KiCad, firmware, 3D review, and explicit fabrication blockers.

    46 parts2Apache-2.0
  • 4 layers64 × 64 mmEspion cam, the printed circuit board in 3D

    Espion cam

    azais-corentin/espion

    Multi-camera IR marker tracking: ESP32-P4/C5 firmware, Rust host, KiCad hardware

    188 partsApache-2.0
  • 2 layers120 × 83 mmAccord logger, the printed circuit board in 3D

    Accord logger

    jgazeley/accord

    Raspberry Pi Pico W firmware and keyless-entry hardware for a 2001 Honda Accord.

    147 partsApache-2.0
  • 8 layers320 × 380 mmChess board, the printed circuit board in 3D

    Chess board

    nicksan222/chess

    Make your move. Watch the board come alive. ♟️✨

    347 partsMIT
  • 6 layers110 × 96 mmAssembly preview, the printed circuit board in 3D

    Assembly preview

    ripclap/rm520n-carrier

    KiCad RM520N-GL carrier with 2.5 GbE, passive PoE, dual SIM interfaces and independent LoRa management.

    446 partsCERN-OHL-P-2.0
  • 4 layers100 × 100 mmKvm switch, the printed circuit board in 3D

    Kvm switch

    Rithvik-Vadlamani/kvm-switch

    Four-layer HDMI/USB KVM design with STM32 firmware, supply supervision, and verification evidence

    170 parts
  • 4 layers58 × 75 mmTS VDAC A5, the printed circuit board in 3D

    TS VDAC A5

    andrewinsidelazarev/VDAC4

    Графический сопроцессор + HDMI конвертер для ZX Evolution / TS-Config + сетевая карта + звуковой модуль

    61 parts2MIT
  • 4 layers160 × 100 mmQuadruped robot controller, the printed circuit board in 3D

    Quadruped robot controller

    mrcha033/hw-codesign

    Agentic hardware co-design: brief to KiCad, firmware, 3D review, and explicit fabrication blockers.

    42 parts2Apache-2.0
  • 2 layers120 × 60 mmRobosub Power, the printed circuit board in 3D

    Robosub Power

    ryos17/robosub-ee

    Stanford Robosub Electrical Repository

    49 parts1
  • 4 layers148 × 78 mmHub, the printed circuit board in 3D

    Hub

    Bruhdows/klink

    Klink is a magnetic tile system for building programmable machines. First up: a marble run with sensors, buttons, lights, gates, splitters and an elevator.

    85 parts
  • 4 layers90 × 75 mmAuxiliary, the printed circuit board in 3D

    Auxiliary

    utof/eeg_ads1299_lab

    It is not a finished EEG recorder, a validated PCB, or permission to attach a circuit to a person. The firmware is a board-dependent bench-only starter using the ADS1299's internal test/short circuits.

    56 parts