
Beaglelogic standalone
abhishek-kakkar/beaglelogic-standalone
BeagleLogic implemented as a turnkey and standalone logic analyzer

v1.0 - Fabricated July/August 2018 - has issues, do not use
Sy99 8mbex is an open-source printed circuit board by wohali, from the wohali/sy99_8mbex repository on GitHub. It is a 2-layer board of 69 × 100 mm with 43 parts on 105 nets, routed with 1,421 tracks and 186 vias.
It is built around the BQ2205LYPW, SN74LVC1G97DBVRE4 and AZ1117EH-3.3TRG1, with the SN74LVCH16T245DL and CR2450 among its other parts. Its parts include 18 capacitors, 9 ICs, 4 connectors, 3 resistors and 2 diodes.
Yamaha SY99 8MB expansion board
v1.0 - Fabricated July/August 2018 - has issues, do not use
v1.1 - Fabricated September 2018 - all good!
Copyright 2018 Joan Sarah Touzet
License: CC BY-SA 3.0
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100n | Capacitors_SMD:C_0805_HandSoldering | C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18 |
| 3 | 1uF | Capacitors_Tantalum_SMD:CP_Tantalum_Case-A_EIA-3216-18_Reflow | C1, C2, C3 |
| 3 | SN74LVC1G97DBVR | SN74LVC1G97DBVR:SOT95P280X145-6N | U4, U5, U6 |
| 2 | 10uF | Capacitors_Tantalum_SMD:CP_Tantalum_Case-A_EIA-3216-18_Reflow | C4, C5 |
| 2 | 1K | Resistors_SMD:R_0805_HandSoldering | R1, R2 |
| 2 | 74ALVC164245DGG,51 | 74ALVC164245DGG_51:SOP50P810X120-48N | U1, U2 |
| 1 | 3.3V_OK | LEDs:LED_D5.0mm | D2 |
| 1 | 3k3 | Resistors_SMD:R_0805_HandSoldering | R3 |
| 1 | 5V_OK | LEDs:LED_D5.0mm | D1 |
| 1 | AS6C6416 | TSOP48:TSOP48 | U8 |
| 1 | AZ1117EH-3.3TRG1 | AZ1117EH-3.3TRG1:SOT230P700X180-4N | U3 |
| 1 | BQ2205LY | SOP65P640X120-16N:SOP65P640X120-16N | U7 |
| 1 | CR2450 | digikey-footprints:Battery_Holder_Coin_2032_BS-7 | BT1 |
| 1 | Conn_01x02 | Pin_Headers:Pin_Header_Angled_1x02_Pitch2.54mm | J1 |
| 1 | Conn_01x12_Male | Pin_Headers:Pin_Header_Straight_1x12_Pitch2.54mm | J3 |
| 1 | Conn_02x20_Odd_Even | SY99:Socket_Strip_Straight_2x20_Pitch2.54mm_10.30Wide_SMD | J2 |
| 1 | Conn_02x20_Odd_Even | SY99:Pin_Header_Straight_2x20_Pitch2.54mm_10.30Wide_SMD | J4 |
| 1 | LOGO | wohali:wohali-logo-new | G*** |
| 1 | LSBW | Connectors:PINTST | TP5 |
| 1 | MSBW | Connectors:PINTST | TP4 |
| 1 | SN74LVCH16T245 | SN74LVCH16T245:TSSOP48 | U9 |
| 1 | VRAM | Connectors:PINTST | TP1 |
| 1 | ~IC | Connectors:PINTST | TP2 |
| 1 | ~OE | Connectors:PINTST | TP3 |

abhishek-kakkar/beaglelogic-standalone
BeagleLogic implemented as a turnkey and standalone logic analyzer

andrewinsidelazarev/VDAC4
Графический сопроцессор + HDMI конвертер для ZX Evolution / TS-Config + сетевая карта + звуковой модуль

mrcha033/hw-codesign
Agentic hardware co-design: brief to KiCad, firmware, 3D review, and explicit fabrication blockers.

azais-corentin/espion
Multi-camera IR marker tracking: ESP32-P4/C5 firmware, Rust host, KiCad hardware

jgazeley/accord
Raspberry Pi Pico W firmware and keyless-entry hardware for a 2001 Honda Accord.


ripclap/rm520n-carrier
KiCad RM520N-GL carrier with 2.5 GbE, passive PoE, dual SIM interfaces and independent LoRa management.

Rithvik-Vadlamani/kvm-switch
Four-layer HDMI/USB KVM design with STM32 firmware, supply supervision, and verification evidence
It measures 69 × 100 mm and has 2 copper layers, 1.6 mm thick.
43 parts, built around the BQ2205LYPW, SN74LVC1G97DBVRE4, AZ1117EH-3.3TRG1 and SN74LVCH16T245DL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the wohali/sy99_8mbex repository on GitHub, at the commit this page was made from: the board is SY99_8MBEX.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask wohali before reusing the design.