Skip to the content

Boards using the INA821ID

6 boards

Boards in 4 GitHub repositories, designed in KiCad, that use the INA821ID by Texas Instruments (-18V~-2.25V、2.25V~18V -40℃~+125℃ 0.025% 1 10uV 110dB 150pA 150pA 1V/V~10000V/V 20mA 2V/us 4.5V~36V 4.7MHz 400nV/℃ 600uA 6us 7nV/√Hz@1kHz 92dB External resistor gain、Overvoltage protection、EMI filtering/RF suppression SOIC-8 Instrumentation Amplifiers ROHS). See how each wires it, with its parts, size, README and files; the INA821ID’s symbol, footprint and pinout are on its own page.

  • 2 layers100 × 100 mmSDRReciever, the printed circuit board in 3D

    SDRReciever

    KonradMcClure/SDR_Receiver

    Software Defined Radio Receiver designed together with Caleb Froelich (https://github.com/froeca) for our Walla Walla University Electronics II project.

    78 parts7
  • 2 layers74 × 72.1 mmENGR357 Project v1.1, the printed circuit board in 3D

    ENGR357 Project v1.1

    pricna/Software-Defined-Radio-Receiver

    Software Defined Radio receiver created for Engineering Electronics II at Walla Walla University.

    80 parts3MPL-2.0
  • 4 layers100 × 100 mmRadio Receiver McCormick Mendoza, the printed circuit board in 3D

    Radio Receiver McCormick Mendoza

    Jeffrey-McCormick/CPTR480-ENGR357_Quadrature_SDR

    Quadrature sampling software defined radio for digital signal processing. Project for Embedded and Real Time Systems (CPTR480) and Engineering Electronics II (ENGR357).

    244 parts2MIT
  • 4 layers343.3 × 120 mmAmp ctrl, the printed circuit board in 3D

    Amp ctrl

    stockmann-lab/shim_amp_hardware_linear

    Hardware related to open-source shim amplifier development for MRI research

    1,251 parts2
  • 2 layers100 × 100 mmSDRBackup2, the printed circuit board in 3D

    SDRBackup2

    KonradMcClure/SDR_Receiver

    Software Defined Radio Receiver designed together with Caleb Froelich (https://github.com/froeca) for our Walla Walla University Electronics II project.

    76 parts7
  • 2 layersENGR357 Project v1.0, the printed circuit board in 3D

    ENGR357 Project v1.0

    pricna/Software-Defined-Radio-Receiver

    Software Defined Radio receiver created for Engineering Electronics II at Walla Walla University.

    79 parts3MPL-2.0