
Backplane
stockmann-lab/shim_amp_hardware_linear
Hardware related to open-source shim amplifier development for MRI research

Hardware related to open-source shim amplifier development for MRI research
Amp ctrl is an open-source printed circuit board by stockmann-lab, from the stockmann-lab/shim_amp_hardware_linear repository on GitHub. It is a 4-layer board of 343.3 × 120 mm with 1,251 parts on 675 nets, routed with 7,934 tracks and 1,222 vias.
It is built around the 74LVC2G17GV,125, INA821ID and ADA4004-1ARJZ-R7, with the OPA37GU/2K5, AD5676ARUZ-REEL7 and TLVH431CPK among its other parts. Its parts include 316 resistors, 282 capacitors, 84 ICs, 78 diodes and 72 connectors. It belongs with the audio and music boards of this library.
This repo contains files related to the MGH "Revision D" linear amplifier development (and associated projects). The shim amplifiers are designed to drive stable currents (up to 4A/channel or more if channels are ganged together in parallel) in shim coils and other inductive loads used for MRI research experiments. The amplifiers are designed to operate inside the MRI shielded room without causing image degradation due to RF interference.
Content will include design files and bills of materials for both the Printed Circuit Boards (power board, control board, and power distribution board) as well as the mechanical enclosure.
The software and firmware for controlling the shim amplifiers via a Snickerdoodle device can be built from https://github.com/LincolnCB/rev_d_shim using the https://github.com/LincolnCB/zynq_toolbox build environment repo.
More details forthcoming.
This project builds upon previous work done at MIT-MGH on a Class-AB linear shim amplifier that uses OPA549 op amps in a push-pull configuration. This previous "Revision C" shim amplifier design is available at:
https://rflab.martinos.org/index.php?title=Current_driver:Current_driver
| Qty | Value | Footprint | References |
|---|---|---|---|
| 82 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP10, TP11, TP12, TP100, TP101, TP106, TP108, TP109, TP110, TP111, TP112, TP113, TP114, TP115, TP120 +66 |
| 71 | 10K | Resistor_SMD:R_0805_2012Metric | R15, R16, R17, R18, R104, R117, R132, R145, R160, R162, R166, R173, R174, R183, R184, R185 +55 |
| 60 | 1uF 16V X7R | Capacitor_SMD:C_0603_1608Metric | C1, C14, C15, C17, C100, C113, C117, C130, C131, C147, C148, C150, C165, C167, C168, C184 +44 |
| 59 | 100 | Resistor_SMD:R_0805_2012Metric | R1, R10, R11, R100, R101, R102, R106, R109, R113, R114, R115, R116, R120, R123, R127, R128 +43 |
| 58 | TestPoint_Flag | TestPoint:TestPoint_Keystone_5019_Miniature | TP13, TP102, TP103, TP104, TP105, TP116, TP117, TP118, TP119, TP130, TP131, TP132, TP133, TP144, TP145, TP146 +42 |
| 51 | 1N4448WS/BAS16J | shim:D_SOD-323F | D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25, D26, D27, D28 +35 |
| 40 | 100pF 50V NP0 | Capacitor_SMD:C_0603_1608Metric | C11, C102, C110, C119, C127, C136, C144, C153, C161, C170, C178, C187, C188, C189, C190, C191 +24 |
| 40 | DNP | Capacitor_SMD:C_0603_1608Metric | C10, C12, C104, C106, C109, C111, C121, C123, C126, C128, C138, C140, C143, C145, C155, C157 +24 |
| 40 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP15, JP17, JP18, JP19, JP20, JP22, JP24, JP25, JP26, JP27, JP29, JP31, JP32, JP33, JP34, JP36 +24 |
| 27 | 10nF 50V NP0 | Capacitor_SMD:C_0603_1608Metric | C32, C33, C34, C35, C36, C37, C38, C39, C40, C41, C42, C43, C44, C205, C233, C234 +11 |
| 27 | 1K | Resistor_SMD:R_0805_2012Metric | R20, R26, R27, R28, R29, R30, R177, R237, R248, R259, R276, R278, R280, R282, R284, R287 +11 |
| 27 | 470K | Resistor_SMD:R_0805_2012Metric | R12, R13, R103, R118, R131, R146, R159, R165, R261, R262, R265, R266, R285, R289, R292, R298 +11 |
| 27 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q3, Q11, Q13, Q15, Q17, Q19, Q21, Q23, Q25, Q27, Q29, Q31, Q33, Q34, Q36 +11 |
| 25 | 10uF 50V X7S | Capacitor_SMD:C_1210_3225Metric | C2, C16, C115, C132, C149, C166, C183, C215, C216, C217, C218, C219, C220, C221, C222, C223 +9 |
| 25 | 1uF 50V X7R | Capacitor_SMD:C_0805_2012Metric | C105, C107, C122, C124, C139, C141, C156, C158, C173, C175, C265, C266, C267, C268, C269, C270 +9 |
| 25 | DNP | Resistor_SMD:R_0805_2012Metric | R3, R14, R24, R105, R108, R110, R119, R122, R124, R133, R136, R138, R147, R150, R152, R161 +9 |
| 24 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP16, JP23, JP30, JP37, JP44, JP51, JP58, JP65, JP76, JP87, JP88, JP89, JP90, JP91, JP100, JP101 +8 |
| 24 | ~ | Connector_Coaxial:SMA_Amphenol_132134_Vertical | J2, J3, J5, J18, J19, J20, J28, J29, J30, J38, J39, J40, J48, J49, J50, J58 +8 |
| 21 | Jumper_NO_Small | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP119, JP120, JP121, JP122, JP123, JP124, JP125, JP126, JP127, JP128, JP129, JP130, JP131, JP132, JP133, JP134 +5 |
| 20 | Conn_02x02 | shim:PinSocket_2x02_P2.54mm_Vertical_SMD_BotEntry_Pin | J6, J13, J21, J24, J31, J34, J41, J44, J51, J54, J61, J64, J71, J74, J81, J84 +4 |
| 19 | 100nF 50V X7R | Capacitor_SMD:C_0603_1608Metric | C18, C28, C114, C116, C133, C134, C151, C164, C181, C182, C204, C246, C247, C251, C252, C282 +3 |
| 18 | 100K | Resistor_SMD:R_0805_2012Metric | R236, R247, R258, R275, R277, R279, R281, R283, R290, R291, R293, R297, R303, R309, R315, R321 +2 |
| 17 | MMBT3906 | Package_TO_SOT_SMD:SOT-23 | Q2, Q4, Q6, Q10, Q12, Q14, Q16, Q18, Q20, Q22, Q24, Q26, Q28, Q30, Q32, Q35 +1 |
| 16 | 10K 0.1% | Resistor_SMD:R_Array_Convex_2x0606 | RN5, RN6, RN7, RN8, RN9, RN10, RN11, RN12, RN13, RN14, RN15, RN16, RN17, RN18, RN19, RN20 |
| 16 | 16V | shim:D_SOD-323F | D33, D34, D39, D40, D45, D46, D51, D52, D57, D58, D63, D64, D69, D70, D75, D76 |
| 16 | 5A | Fuse:Fuse_1206_3216Metric | F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, F13, F14, F15, F16, F17 |
| 16 | 8.2K | Resistor_SMD:R_0805_2012Metric | R62, R163, R188, R190, R199, R201, R210, R212, R221, R223, R232, R234, R243, R245, R254, R256 |
| 16 | TLVH431 | Package_TO_SOT_SMD:SOT-23 | U7, U9, U48, U49, U50, U51, U52, U53, U54, U55, U56, U57, U58, U59, U60, U61 |
| 16 | TestPoint_2Pole_Vert | shim:TestPoint_2Pads_Pitch4mm_Drill1mm0.7mm | TP8, TP41, TP50, TP51, TP65, TP79, TP93, TP107, TP121, TP135, TP149, TP160, TP161, TP162, TP163, TP164 |
| 16 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP21, JP28, JP35, JP42, JP49, JP56, JP63, JP70, JP72, JP73, JP81, JP82, JP83, JP84, JP85, JP86 |
| 14 | 4.64K | Resistor_SMD:R_0805_2012Metric | R175, R176, R178, R179, R180, R181, R192, R193, R203, R204, R214, R215, R225, R226 |
| 14 | Jumper_NO_Small | shim:Jumper_SMT_Gap-3mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9, JP10, JP11, JP12, JP13, JP14 |
| 11 | 1nF 50V NP0 | Capacitor_SMD:C_0603_1608Metric | C4, C56, C69, C86, C103, C120, C137, C154, C171, C198, C244 |
| 10 | 0 | Resistor_SMD:R_0805_2012Metric | R36, R288, R343, R344, R345, R346, R347, R348, R349, R350 |
| 10 | 74LVC2G17 | Package_TO_SOT_SMD:SOT-23-6 | U17, U21, U26, U37, U46, U47, U75, U78, U83, U86 |
| 9 | ADA4004-1 | Package_TO_SOT_SMD:SOT-23-5 | U3, U10, U15, U20, U25, U30, U35, U40, U45 |
| 9 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP71, JP108, JP112, JP113, JP114, JP115, JP116, JP117, JP118 |
| 9 | Jumper_3_Open | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP102, JP103, JP104, JP105, JP106, JP107, JP109, JP110, JP111 |
| 8 | 13K | Resistor_SMD:R_0805_2012Metric | R164, R191, R202, R213, R224, R235, R246, R257 |
| 8 | 16.2K 0.1% | Resistor_SMD:R_0805_2012Metric | R7, R70, R84, R98, R112, R126, R140, R154 |
| 8 | 1K 0.1% | Resistor_SMD:R_0805_2012Metric | R2, R65, R79, R93, R107, R121, R135, R149 |
| 8 | 20K | Resistor_SMD:R_0805_2012Metric | R6, R69, R83, R97, R111, R125, R139, R153 |
| 8 | 220pF 50V NP0 | Capacitor_SMD:C_0603_1608Metric | C13, C78, C95, C112, C129, C146, C163, C180 |
| 8 | 2N7002 | Package_TO_SOT_SMD:SOT-563 | Q37, Q41, Q45, Q49, Q53, Q57, Q61, Q65 |
| 8 | 4.7uF 16V X7R | Capacitor_SMD:C_0805_2012Metric | C235, C236, C237, C238, C239, C240, C241, C242 |
| 8 | 470 | Resistor_SMD:R_0805_2012Metric | R58, R167, R168, R169, R170, R171, R172, R182 |
| 8 | 74HC02 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U4, U22, U31, U42, U72, U77, U80, U85 |
| 8 | 74LVC2G06 | Package_TO_SOT_SMD:SOT-23-6 | U5, U16, U27, U32, U36, U41, U74, U82 |
| 8 | 82pF 50V NP0 | Capacitor_SMD:C_0603_1608Metric | C9, C74, C91, C108, C125, C142, C159, C176 |
| 8 | Conn_01x02 | Connector_Molex:Molex_Mini-Fit_Jr_5566-02A_2x01_P4.20mm_Vertical | J92, J93, J94, J95, J96, J97, J98, J99 |
| 8 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11, J26, J36, J46, J56, J66, J76, J86 |
| 8 | Conn_02x10_Odd_Even | shim:PinSocket_2x10_P2.54mm_Vertical_SMD_BotEntry_Pin | J8, J23, J33, J43, J53, J63, J73, J83 |
| 8 | DNP | Capacitor_SMD:C_1210_3225Metric | C19, C84, C101, C118, C135, C152, C169, C186 |
| 8 | DNP | shim:D_SOD-123 | D5, D6, D7, D8, D9, D10, D11, D12 |
| 8 | INA821/819 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U13, U18, U23, U28, U33, U38, U43 |
| 8 | OPA37 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2, U14, U19, U24, U29, U34, U39, U44 |
| 8 | TBD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U73, U76, U79, U81, U84, U87, U88, U89 |
| 8 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP42, TP43, TP44, TP45, TP46, TP47, TP48, TP49 |
| 6 | #4/M3 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4, H7, H8 |
| 6 | 3.7 mm | MountingHole:MountingHole_3.7mm | H5, H6, H9, H10, H11, H12 |
| 6 | Jumper_NC_Small | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP74, JP75, JP77, JP78, JP79, JP80 |
| 5 | 3.3K | Resistor_SMD:R_0805_2012Metric | R25, R41, R268, R270, R272 |
| 4 | 100 5% | Resistor_SMD:R_Array_Concave_4x0603 | RN1, RN2, RN3, RN4 |
| 3 | ADC081C021 | Package_SO:MSOP-8_3x3mm_P0.65mm | U67, U68, U69 |
| 3 | FIN1028 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U62, U63, U71 |
| 3 | RJ45_Shielded | shim:RJ45_TE_x-406541-x_Horizontal | J15, J17, J88 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP31, TP63, TP165 |
| 2 | 1.2nF 50V NP0 | Capacitor_SMD:C_0603_1608Metric | C26, C31 |
| 2 | 10 | Resistor_SMD:R_0805_2012Metric | R21, R55 |
| 2 | 30 | Resistor_SMD:R_0805_2012Metric | R22, R23 |
| 2 | 33K 5% | Resistor_SMD:R_Array_Concave_4x0603 | RN21, RN22 |
| 2 | Green | shim:LED_Kingbright_APA3010_3x2mm_Horizontal | D3, D4 |
| 2 | TestPoint_Flag | TestPoint:TestPoint_Pad_1.0x1.0mm | TP6, TP21 |
| 1 | 10uF 16V X5R | Capacitor_SMD:C_0805_2012Metric | C203 |
| 1 | 30V TVS | shim:D_SMC | D2 |
| 1 | 40A 60VDC | shim:Fuse_12.4x4.5mm_SMT | F1 |
| 1 | 74LVC1G04 | Package_TO_SOT_SMD:SOT-23-5 | U12 |
| 1 | AD5676 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U8 |
| 1 | ADS8168/ADS8167 | shim:VQFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U90 |
| 1 | Conn_01x02 | shim:Connector_Phoenix_1190363 | J4 |
The 1,243 most common of 1,251 parts.

stockmann-lab/shim_amp_hardware_linear
Hardware related to open-source shim amplifier development for MRI research

stockmann-lab/shim_amp_hardware_linear
Hardware related to open-source shim amplifier development for MRI research

stockmann-lab/shim_amp_hardware_linear
Hardware related to open-source shim amplifier development for MRI research

stockmann-lab/shim_amp_hardware_linear
Hardware related to open-source shim amplifier development for MRI research

stockmann-lab/shim_amp_hardware_linear
Hardware related to open-source shim amplifier development for MRI research

stockmann-lab/shim_amp_hardware_linear
Hardware related to open-source shim amplifier development for MRI research

stockmann-lab/shim_amp_hardware_linear
Hardware related to open-source shim amplifier development for MRI research



homelith/pico-disp-ident
Custom firmware to make some RP2040 board working as DVI display tester & identifier

2468shrm/M4_CAN_Feather_Carrier_v6
Sixth version of the M4 Feather CAN Express carrier board. Hopefully, "the last".

BCIT-BAJA/BCIT-BAJA-DAQ
The telemetry system for BCIT-BAJA car, collects strain across suspension components of car to allow BAJA to optimize material and reinforce weak areas of suspension.


mazduino/stm32f407xxx-mega-layout
STMM32F407xxx Mega Layout. Made For Speeduino and RusEFI Firmware

KonradMcClure/SDR_Receiver
Software Defined Radio Receiver designed together with Caleb Froelich (https://github.com/froeca) for our Walla Walla University Electronics II project.
It measures 343.3 × 120 mm and has 4 copper layers, 1.6 mm thick.
1,251 parts, built around the 74LVC2G17GV,125, INA821ID, ADA4004-1ARJZ-R7 and OPA37GU/2K5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the stockmann-lab/shim_amp_hardware_linear repository on GitHub, at the commit this page was made from: the board is pcbs/amp ctrl/amp ctrl.kicad_pcb and its schematic pcbs/amp ctrl/amp ctrl.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask stockmann-lab before reusing the design.