Skip to the content

Boards using the CSD18543Q3A

22 boards

Boards in 18 GitHub repositories, designed in KiCad, that use the CSD18543Q3A by Texas Instruments (-55℃~+150℃ 1 N-channel 11.1nC@10V 168pF 2V 4.8pF 60A 60V 66W 8.1mΩ@10V 885pF N-Channel VSONP-8(3.3x3.3) MOSFETs ROHS). See how each wires it, with its parts, size, README and files; the CSD18543Q3A’s symbol, footprint and pinout are on its own page.

  • 8 layers424.5 × 336.3 mmBarebones, the printed circuit board in 3D

    Barebones

    nzevh/barebones

    fully open source laptop based on the RK3588 Soc

    1,033 parts23CERN-OHL-S-2.0
  • 4 layers156.5 × 85.4 mmP2 Kevinbot Board, the printed circuit board in 3D

    P2 Kevinbot Board

    meowmeowahr/KevinbotV3-KiCAD

    Kevinbot Core - Parallax Propeller 2 Robot Controller

    166 parts7CERN-OHL-S-2.0
  • 8 layers64 × 56 mmPS GAN-60W, the printed circuit board in 3D

    PS GAN-60W

    jonahsaunders/planar-studio

    KiCad extension for the copper you can't buy as a part — design planar inductors, transformers, PCB motor stators, filters, and antennas, with electrical modeling and direct write-back to your board.

    89 parts4MIT
  • 4 layers55.4 × 87.4 mmPower board, the printed circuit board in 3D

    Power board

    JRavenelco/WRO_2025_SSbots

    We are the SSBots team from Mexico, competitors in the WRO Future Engineers category. This is our first year competing in this category, exploring further into WRO after competing for years in the Robo Mission Category.

    161 parts2
  • 4 layers100 × 80 mmEmb multirail smps, the printed circuit board in 3D

    Emb multirail smps

    CGainsWorks/emb-multirail-smps

    Compact multi-output switch-mode power supply in Altium: synchronous buck, boost and LDO stages on a 4-layer board, with loop compensation, thermal analysis and EMC pre-compliance.

    79 parts1MIT
  • 4 layers80 × 80 mmFOC CONTROLLER V2, the printed circuit board in 3D

    FOC CONTROLLER V2

    INBOARDBOT/2526_PROJET2A_TDI

    Total Drive Immersion - Motion System

    127 parts1MIT
  • 4 layers158 × 158.3 mmBrick Buck PCB, the printed circuit board in 3D

    Brick Buck PCB

    ParadigmEngineering/aks-2026-hardware

    Autonomous Karting Series (2026) hardware for Paradigm Engineering

    111 parts1
  • 4 layers110 × 85 mmPreview, the printed circuit board in 3D

    Preview

    Takazudo/zudo-pd

    P15 r1 is the common 27 × 40 mm STUSB4500 15 V / 3 A module for LED first, then PD15. The same PCB, population and NVM image serve both. Source: board-p15-draft.kicadpcb and ../../scripts/schgen/boardp15spec.py.

    285 parts1
  • 4 layers70 × 70 mmSIGURD, the printed circuit board in 3D

    SIGURD

    aesirkth/Fafnir

    Propulsion Engine Controller

    159 parts
  • 4 layers125 × 92 mmCarradio peripheral rev03, the printed circuit board in 3D

    Carradio peripheral rev03

    gschuurman/android_vendor_gschuurman_vehicle_interfaces

    vehicle interfaces for android automotive for a custom headunit

    269 parts
  • 4 layers100 × 65 mmAmpere, the printed circuit board in 3D

    Ampere

    LtBrain/Ampere

    A variable benchtop power supply

    214 partsMIT
  • 2 layers115 × 80 mmNixie Clock, the printed circuit board in 3D

    Nixie Clock

    PennyLekas/Nixie-Clock

    v1 is broken and required some bodge wires to work. I have not updated the schematic and PCB to correct my mistakes. It also has some deficencies in the dimming circuit resulint in a quiet, but audible whine.

    102 parts
  • 4 layers106 × 110 mmRearCircuitBoard 10, the printed circuit board in 3D

    RearCircuitBoard 10

    ssbingo/samba-solar-track

    Samba Solar Track – Solarnachführung mit Sturmschutz: Handbuch, Platine und Gehäuse für den Nachbau (10,1-Zoll-Version)

    329 parts
  • 4 layers89 × 60.8 mmBuck, the printed circuit board in 3D

    Buck

    Tim4769/Microver

    Swiss Rover Challenge rover project with final electronics, mechanical handoff files, PCB validation firmware, and shared project assets.

    68 parts
  • 2 layers40 × 22 mmBUCK Rpi5, the printed circuit board in 3D

    BUCK Rpi5

    AresEnsea/2526_Projet2A_AresCFR

    Ce repository GitHub regroupe l'ensemble des projets et documents réalisés par l'équipe Ares pour la Coupe de France de Robotique 2026.

    30 parts5
  • 4 layers71 × 64 mmPCB RAIL, the printed circuit board in 3D

    PCB RAIL

    AresEnsea/2526_Projet2A_AresCFR

    Ce repository GitHub regroupe l'ensemble des projets et documents réalisés par l'équipe Ares pour la Coupe de France de Robotique 2026.

    116 parts5
  • 4 layers100 × 60 mmUsb power 3s, the printed circuit board in 3D

    Usb power 3s

    misko/prompt2device

    The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

    100 parts3MIT
  • 2 layers27 × 40 mmBoard p, the printed circuit board in 3D

    Board p

    Takazudo/zudo-pd

    P15 r1 is the common 27 × 40 mm STUSB4500 15 V / 3 A module for LED first, then PD15. The same PCB, population and NVM image serve both. Source: board-p15-draft.kicadpcb and ../../scripts/schgen/boardp15spec.py.

    53 parts1
  • 4 layers100 × 100 mmCarradio peripheral rev05, the printed circuit board in 3D

    Carradio peripheral rev05

    gschuurman/android_vendor_gschuurman_vehicle_interfaces

    vehicle interfaces for android automotive for a custom headunit

    211 parts
  • 2 layers62 × 30 mmBstconv, the printed circuit board in 3D

    Bstconv

    hughminhphan/PROJECTS

    My projects

    24 parts
  • 2 layers37 × 52.5 mmDetector power, the printed circuit board in 3D

    Detector power

    icl-rocketry/HARRIER

    Radiation experiment for payload 2026

    43 parts
  • 4 layers100 × 135 mmMicrover2026 Modular Final, the printed circuit board in 3D

    Microver2026 Modular Final

    Tim4769/Microver

    Swiss Rover Challenge rover project with final electronics, mechanical handoff files, PCB validation firmware, and shared project assets.

    66 parts