Skip to the content

Boards using the TLV62568DBVR-TP

21 boards

Boards in 19 GitHub repositories, designed in KiCad, that use the TLV62568DBVR-TP by TECH PUBLIC (-40℃~+85℃ 1 1.5A 1.5MHz 2.5V~6V 40uA Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Cable compensation Step-down type Yes SOT-23-5 DC-DC Converters ROHS). See how each wires it, with its parts, size, README and files; the TLV62568DBVR-TP’s symbol, footprint and pinout are on its own page.

  • 2 layers54 × 85.6 mmBoard43, the printed circuit board in 3D

    Board43

    smartbank-inc/Board43

    Board43 is an RP2350A-based microcontroller development board. Flash PicoRuby or your favorite firmware and start hacking.

    583 parts30
  • 4 layers91.3 × 53.5 mmSsd2828 board, the printed circuit board in 3D

    Ssd2828 board

    dartcom/ssd2828-dev

    A carrier board for the ssd2828 and the LH154Q01 & VS035ZSM lcd panels

    144 parts23
  • 4 layers23 × 42 mmESP32S3 M.2 Board, the printed circuit board in 3D

    ESP32S3 M.2 Board

    ItsNotDaan/LiberBoard

    LiberBoard: An open-source, modular platform for learning electronics. Offers LiBo ARM-based PCBs and add-on boards with practical exercises and code snippets. Designed for easy learning and project creation.

    69 parts8CERN-OHL-P-2.0
  • 2 layers54.1 × 21.9 mmCoralWave, the printed circuit board in 3D

    CoralWave

    mineiwik/CoralWave

    Custom Sub-GHz Transceiver Gateway

    45 parts6MIT
  • 4 layers39.4 × 96 mmMx master remake, the printed circuit board in 3D

    Mx master remake

    great-houk/mx_master_remake

    [probe-rs]: https://crates.io/crates/probe-rs [defmt]: https://github.com/knurling-rs/defmt [flip-link]: https://github.com/knurling-rs/flip-link

    79 parts1MIT
  • 4 layers100 × 60 mmCart ecp5, the printed circuit board in 3D

    Cart ecp5

    nelgau/hicart

    This is a present for an old friend!

    162 parts1
  • 4 layers71.9 × 20 mmHD800-wireless, the printed circuit board in 3D

    HD800-wireless

    AarnimM22/HD800-wireless

    dual CS43131 + nrf5340 DAC/AMP for turning Sennheiser HD800 into wireless

    121 parts
  • 4 layers91.4 × 88.4 mmSAcre, the printed circuit board in 3D

    SAcre

    Cosmin-DB/SAcre

    Diseño electrónico de un dispositivo portátil basado en ESP32.

    93 parts
  • 2 layers54.1 × 33.9 mmChrononauts board, the printed circuit board in 3D

    Chrononauts board

    dsg-jam/chrononauts-quest

    This sub-folder contains the hardware design files for an RF transceiver system built using an ESP32-C3 module and a CC1101 RF chip.

    59 partsMIT
  • 2 layers75.9 × 74.5 mmGeheimbadge controller, the printed circuit board in 3D

    Geheimbadge controller

    Geheimorganisation/geheimbadge-hardware

    Browse the files on KiCanvas - by Stargirl Flowers

    88 partsMIT
  • 4 layersCansat-2023, the printed circuit board in 3D

    Cansat-2023

    GWC-Cansat/Cansat-2023

    The GWC Cansat 2023 files

    60 partsGPL-3.0
  • 4 layers80 × 35 mmBodyTempSensor, the printed circuit board in 3D

    BodyTempSensor

    ItsNotDaan/BodyTempSensor

    KiCad PCB design for a body temperature sensor

    79 parts
  • 4 layers100 × 80 mmScopeboy, the printed circuit board in 3D

    Scopeboy

    leslier7/scopeboy

    Polished version of the ScopeBoy project started in ECE5730

    151 parts
  • 2 layers66 × 133.4 mm1001016-001-10-01 PinJammer V01, the printed circuit board in 3D

    1001016-001-10-01 PinJammer V01

    pinqin/PinJammerV01

    This file documents the hardware of PCB 1001016-001-10-01PinJammerV01, including a consolidated bill of materials.

    72 parts
  • 4 layers65 × 100 mmPGR, the printed circuit board in 3D

    PGR

    Projeto-Guarda-Rios/PCB

    O repositório para a PCB do Projeto Guarda Rios! Inclui todos os ficheiros relacionados com a PCB!

    167 parts2MIT
  • 4 layersPGR, the printed circuit board in 3D

    PGR

    Projeto-Guarda-Rios/PCB

    O repositório para a PCB do Projeto Guarda Rios! Inclui todos os ficheiros relacionados com a PCB!

    161 parts2MIT
  • 2 layers55.2 × 137.2 mmESP+Power Only, the printed circuit board in 3D

    ESP+Power Only

    aaronluebbert/ChessLink

    houses code from our Microcontroller Project Lab from Summer 2026 at TTU

    35 parts1
  • 2 layers98 × 60 mmClearBell Inneneinheit, the printed circuit board in 3D

    ClearBell Inneneinheit

    akoerner-dev/ClearBell

    Selbst entwickeltes ESP32-Klingelsystem fuer ein Zweifamilienhaus - KiCad-Hardware und Arduino-Firmware (WLAN/UDP, HMAC-gesichert).

    30 parts1MIT
  • 4 layers98 × 60 mmClearBell V0.2 Innen, the printed circuit board in 3D

    ClearBell V0.2 Innen

    akoerner-dev/ClearBell

    Selbst entwickeltes ESP32-Klingelsystem fuer ein Zweifamilienhaus - KiCad-Hardware und Arduino-Firmware (WLAN/UDP, HMAC-gesichert).

    59 parts1MIT
  • 4 layers100 × 100 mmAmod c, the printed circuit board in 3D

    Amod c

    gallicchio/AMOD-and-RFMOD

    The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

    211 parts
  • 4 layers52 × 27 mmEcp5-mini, the printed circuit board in 3D

    Ecp5-mini

    kitspace-test-repos/kicad6-file-collection

    111 partsMIT