

Board43
Board43 is an RP2350A-based microcontroller development board. Flash PicoRuby or your favorite firmware and start hacking.
- Size
- 54 × 85.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 583
- Nets
- 334
- Pads
- 2,384
- Tracks, vias
- 4,335, 706
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 21 Apr 2026
- Updated
- 30 Apr 2026
Overview
Board43 is an open-source printed circuit board by smartbank-inc, from the smartbank-inc/Board43 repository on GitHub. It is a 2-layer board of 54 × 85.6 mm with 583 parts on 334 nets, routed with 4,335 tracks and 706 vias.
It is built around the RP2350A, TLV62568DBVR-TP and W25Q32JVSSIQ, with the LSM6DS3TR-C, SN74AHCT1G125DBVR(UMW) and TPD2EUSB30ADRT among its other parts. Its parts include 283 capacitors, 259 diodes, 19 resistors, 7 ICs and 6 switches. It belongs with the RP2350 boards of this library.
Main components
12RP2350A
QFN-60-EP(7x7)Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、Integrated LDO、True random number generator (TRNG)、Hardware ECC check QFN-60-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)TLV62568DBVR-TP
SOT-23-5-40℃~+85℃ 1 1.5A 1.5MHz 2.5V~6V 40uA Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Cable compensation Step-down type Yes SOT-23-5 DC-DC Converters ROHSTECH PUBLICDC-DC ConvertersW25Q32JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 133MHz 1uA 2.7V~3.6V 20 Years 32Mbit 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHLSM6DS3TR-C
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 3uA 4KB IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps 运动事件检测、同步与时间戳 LGA-14(2.5x3) Accelerometers ROHSSTMicroelectronicsAccelerometersSN74AHCT1G125DBVR(UMW)
SOT-23-5-40℃~+125℃ 1 1 10uA 12ns@5V,50pF 2V 3.8V、4.4V 4.5V~5.5V 440mV 74AHCT 800mV 8mA 8mA SOT-23-5 Logic Gates ROHSUMWLogic GatesTPD2EUSB30ADRT
SOT(9x3)-40℃~+85℃ 0.7pF 2 3.6V 4.5V 45W@8/20us 5A@8/20us 8V ESD IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT(9x3) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)WS2812C-2020-V1
SMD,2x2mm0.5mA 0.84mm 2.2mm 2kHz 2mm 3.7V~5.3V 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit G:520nm、R:624nm、B:467nm R:130mcd、G:320mcd、B:60mcd SMD,2x2mm RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)ABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystalsBM03B-SRSS-TB
Header SR 1.0 SMT top entry, 1mm pitchJSTUncategorisedMLT-8530
SMD,8.5x8.5mm-20℃~+70℃ 2.5V~4.5V 2.7kHz 3.3mm 3.6V 8.5mm 8.5mm 80dB 95mA Electromagnetic Passive (Externally Driven) SMD SMD,8.5x8.5mm Buzzers ROHSJiangsu Huaneng ElecBuzzersS9013
SOT-23-55℃~+150℃ 1 NPN 100nA 120 150MHz 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHSTWGMCBipolar (BJT)SMF5.0A
SOD-123FLESD And Surge Protection (TVS/ESD)hongjiacheng
README
README.mdBoard43
Board43 is an RP2350A-based microcontroller development board. Flash PicoRuby or your favorite firmware and start hacking.
Directory Structure
| Directory | Description | License |
|---|---|---|
docs/ | Reference manual and its compiler | MIT (compiler) / CC BY-SA 4.0 (document content) |
firmware/ | PicoRuby-based firmware | MIT |
pcb/ | KiCad PCB design data | CERN-OHL-W-2.0 (some files under CC BY-SA 4.0) |
playground/ | Browser-based PicoRuby IDE | MIT |
workshop/ | Workshop materials (Japanese / English) | CC BY-SA 4.0 |
License
Each directory in this repository is licensed independently. See the LICENSE file or README in each directory for details.
Parts
583| Qty | Value | Footprint | References |
|---|---|---|---|
| 265 | 100nF | Capacitor_SMD:C_0201_0603Metric | C10, C11, C100, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112, C113 +249 |
| 256 | WS2812C-2020-V1 | Board43:WS2812C-2020-V1 | LED1, LED10, LED11, LED100, LED101, LED102, LED103, LED104, LED105, LED106, LED107, LED108, LED109, LED110, LED111, LED112 +240 |
| 6 | SW_Push | Board43:SKRPACE010 | SW1, SW2, SW3, SW4, SW5, SW6 |
| 4 | 100nF | Capacitor_SMD:C_0402_1005Metric | C20, C23, C24, C25 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C4, C5, C6 |
| 3 | 1k | Resistor_SMD:R_0201_0603Metric | R11, R13, R14 |
| 3 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C3, C8, C17 |
| 2 | 100k | Resistor_SMD:R_0402_1005Metric | R5, R7 |
| 2 | 10k | Resistor_SMD:R_0201_0603Metric | R15, R16 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C21, C22 |
| 2 | 27 | Resistor_SMD:R_0201_0603Metric | R9, R10 |
| 2 | 4.7uF | Board43_KiCad:C_0402_1005Metric_Narrow | C18, C19 |
| 2 | 47uF | Capacitor_SMD:C_1206_3216Metric | C26, C27 |
| 2 | 5.1k | Resistor_SMD:R_0201_0603Metric | R1, R2 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 2.2k | Resistor_SMD:R_0402_1005Metric | R17 |
| 1 | 22k | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 32.4k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 33 | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 340k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 450k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 470 | Resistor_SMD:R_0201_0603Metric | R19 |
| 1 | 470pF | Capacitor_SMD:C_0201_0603Metric | C2 |
| 1 | 5.6k | Resistor_SMD:R_0201_0603Metric | R12 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | BM03B-SRSS-TB | Board43:BM03B-SRSS-TB | J1 |
| 1 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J2 |
| 1 | L | Board43:AOTA-B201610S3R3-101-T | L2 |
| 1 | LED | Board43_KiCad:KT-0603W | D2 |
| 1 | LM73100RPWR | Board43_KiCad:LM73100RPWR | U1 |
| 1 | LSM6DS3TR | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U6 |
| 1 | MLT-8530 | Board43:MLT-8530 | BZ1 |
| 1 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1 |
| 1 | RP2350A | Board43_KiCad:RP2350A | U3 |
| 1 | S9013 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SMF5.0A | Diode_SMD:D_SOD-123F | D1 |
| 1 | SN74AHCT1G125DBVR | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | TLV62568DBVR | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | TMS252012ALM-2R2MTA | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | TPD2EUSB30A | Board43_KiCad:TPD2EUSB30ADRTR | U7 |
| 1 | TYPE-C16PIN | Board43:TYPE-C16PIN | USB1 |
| 1 | US1MW | Diode_SMD:D_SOD-123F | D3 |
| 1 | W25Q32JVSS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U5 |
Similar boards
- 4 layers100 × 80 mm

- 4 layers23 × 42 mm

ESP32S3 M.2 Board
ItsNotDaan/LiberBoard
LiberBoard: An open-source, modular platform for learning electronics. Offers LiBo ARM-based PCBs and add-on boards with practical exercises and code snippets. Designed for easy learning and project creation.
69 parts8CERN-OHL-P-2.0 - 4 layers80 × 35 mm

- 2 layers60.4 × 112.5 mm

- 4 layers140 × 70 mm

- 2 layers42 × 66 mm

Wafflehw rev0.1
Jankyneering/Waffle_hw
Hardware designs for Waffle, a compact Pager and general RF multitool.
42 parts2GPL-3.0 - 4 layers100.5 × 87.7 mm

- 2 layers

Questions
How big is the Board43 PCB?
It measures 54 × 85.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Board43 use?
583 parts, built around the RP2350A, TLV62568DBVR-TP, W25Q32JVSSIQ and LSM6DS3TR-C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Board43 KiCad files?
From the smartbank-inc/Board43 repository on GitHub, at the commit this page was made from: the board is pcb/Board43.kicad_pcb and its schematic pcb/Board43.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Board43 design in my own project?
Its repository states no licence, so its author keeps all rights: ask smartbank-inc before reusing the design.