Skip to the content

Boards using the SIT3088ETK

7 boards

Boards in 7 GitHub repositories, designed in KiCad, that use the SIT3088ETK by SIT (-40℃~+125℃ 1 1 14Mbps 256 280uA 3V~5.5V Enable shutdown、Overcurrent Protection、Low-power mode、Tx/Rx enable Half-Duplex Transceiver ±15kV DFN-8-EP(3x3) RS-485 / RS-422 ICs ROHS). See how each wires it, with its parts, size, README and files; the SIT3088ETK’s symbol, footprint and pinout are on its own page.

  • 6 layers76 × 46.4 mmRp2350 driver, the printed circuit board in 3D

    Rp2350 driver

    sequoia-hope/rp2350-motor-controller

    An RP2350 based brushless motor controller

    291 parts39
  • 8 layers50 × 50 mmUSB C PSU, the printed circuit board in 3D

    USB C PSU

    LeoDJ/USB-C_PD_PSU

    A 5-60V bidirectional buck-boost-converter, also capable of 240W USB PD EPR (48V 5A)

    149 parts29
  • 4 layers45 × 60 mmHPM5361-RMCS Slave V1.0, the printed circuit board in 3D

    HPM5361-RMCS Slave V1.0

    Kaiser041224/HPM5361-RMCS_Slave-Pro

    HPM5361-RMCSSlave-V1.0 是一个基于 KiCad 9 的硬件工程,核心主控为 HPM5361ICB1。从顶层框图、层级原理图和关键器件选型来看,这块板更像一块面向机器人/运动控制场景的从控板,用于通信汇聚、PWM 外设输出、姿态感知、板载存储和基础人机交互。

    222 parts2
  • 4 layers65 × 30.9 mmElec RPI Robot HAT, the printed circuit board in 3D

    Elec RPI Robot HAT

    modewang/elec_RPI_Robot_HAT

    The RPIRobotHAT can be power from 5 to 28V. It is designed to use of the motor connector as an power input.

    127 partsApache-2.0
  • 2 layers37.8 × 44.4 mmServomotor3, the printed circuit board in 3D

    Servomotor3

    tomrodinger/servomotor

    Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.

    79 parts17MIT