Skip to the content

Boards using the SGP30

13 boards

Boards in 13 GitHub repositories, designed in KiCad, that use the SGP30 by Sensirion (Gas sensor for indoor air quality applications. Datasheet: https://www.sensirion.com/file/datasheet_sgp30/). See how each wires it, with its parts, size, README and files; the SGP30’s symbol, footprint and pinout are on its own page.

  • 2 layers70.1 × 43.2 mmIaq device, the printed circuit board in 3D

    Iaq device

    nkitanov/iaq_board

    IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

    19 parts396
  • 4 layers42 × 42 mmDynossat edu obc, the printed circuit board in 3D

    Dynossat edu obc

    BHDynamics/dynossat-edu-obc

    DynOSSAT-EDU, educational PocketQube satellite On-Board Computer files

    60 parts14
  • 2 layers37.5 × 51.4 mmCo2-detector, the printed circuit board in 3D

    Co2-detector

    deuteros76/co2-detector

    After reading this article (ES) I started to think about creating my own sensor board. I searched which sensor to use and the SGP30 seemed a good option to me.

    13 parts9
  • 2 layers40 × 98 mmAirquality, the printed circuit board in 3D

    Airquality

    LukasLendvorsky/airquallity-esphome

    WIFI airquality sensor with ESP32

    59 parts3GPL-3.0
  • 2 layers20 × 49 mmIndicator fun V3s, the printed circuit board in 3D

    Indicator fun V3s

    vrubel/indicator-fun-V3s

    "indicator.fun" device implementation on the processor Allwinner V3s

    168 parts2MIT
  • 2 layers72 × 121 mmTeebeutel, the printed circuit board in 3D

    Teebeutel

    entropia/Teebeutel-Hardware

    Teebeutel (eng. Teabag) is an electronic, Entropia themed con-badge for the GPN20, featuring an ESP32 microprocessor running micropython.

    201 parts1
  • 2 layers63 × 109 mmCansat pcb, the printed circuit board in 3D

    Cansat pcb

    samvandenabeele/CanSat

    SBC CanSat

    21 parts1MIT
  • 2 layers30 × 62 mmWiFIR, the printed circuit board in 3D

    WiFIR

    Duckle29/WiFIR

    A WiFi connected IR blaster to control heatpumps

    34 partsBSD-3-Clause
  • 2 layers134.6 × 127 mmSensors Course Project, the printed circuit board in 3D

    Sensors Course Project

    dustpot/indoor-air-monitor

    A battery-powered ESP32 monitor for the non-particulate qualities of indoor air: temperature, humidity, pressure, eCO₂, and TVOC.

    28 parts
  • 2 layers67.5 × 77.5 mmECU, the printed circuit board in 3D

    ECU

    EthanBudde/OSSEM

    OSSEM organization repo

    55 partsGPL-3.0
  • 2 layers73 × 77.5 mmUca dkaiot2-kicad, the printed circuit board in 3D

    Uca dkaiot2-kicad

    LEAT-EDGE/ambient-pcb-dkaiot

    The design also provides empty footprints for several other sensors which are not populated in the Ambient variant: - Light sensor (LITEON LTR-303ALS-01) - MEMS microphone (Knowles SPH0645LM4H) - Indoor air quality…

    184 partsCERN-OHL-P-2.0
  • 2 layers23.5 × 5 mmMetsta, the printed circuit board in 3D

    Metsta

    losneoo/esp32-wsn-telemetry-node

    Low-power ESP32 environmental telemetry node. Includes custom KiCad hardware schematics, ESP-NOW protocol broadcasting, custom I2C drivers, and deep sleep power management.

    25 parts
  • 4 layers44.8 × 88.5 mmBiaOpena, the printed circuit board in 3D

    BiaOpena

    theBrutzler/BiaOpena

    a not beerbottleopener

    107 parts