/Omote.kicad_pcb.jpg?size=s&soon)

BiaOpena
a not beerbottleopener
- Size
- 44.8 × 88.5 mm
- Copper layers
- 4
- Thickness
- 1.56 mm
- Parts
- 107
- Nets
- 103
- Pads
- 414
- Tracks, vias
- 1,097, 269
- Pours
- 19
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 2 Nov 2022
- Updated
- 2 Nov 2022
Overview
BiaOpena is an open-source printed circuit board by theBrutzler, from the theBrutzler/BiaOpena repository on GitHub. It is a 4-layer board of 44.8 × 88.5 mm with 107 parts on 103 nets, routed with 1,097 tracks and 269 vias.
It is built around the ESP32-PICO-D4, CH340K and SGP30, with the ADXL343BCC, DW01A and DMG2301L-7(ES) among its other parts. Its parts include 42 resistors, 34 capacitors, 9 ICs, 7 transistors and 5 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
9ESP32-PICO-D4
QFN-48-EP(7x7)-40℃~+85℃ -97dBm 150Mbps 2.412GHz~2.484GHz 2.4GHz 2.7V~3.6V 20dBm Bluetooth、WiFi SPI、I2C transceiver QFN-48-EP(7x7) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICsCH340K
ESSOP-10-150mil-1mm-20℃~+70℃ 2Mbps 3.3V、5V USB 2.0 USB to serial ESSOP-10-150mil-1mm USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersSGP30
Gas sensor for indoor air quality applications. Datasheet: https://www.sensirion.com/file/datasheet_sgp30/SensirionUncategorisedADXL343BCC
LGA143-Axis, ±2g/±4g/±8g/±16g Digital MEMS AccelerometerAnalog DevicesUncategorisedDW01A
SOT-23-6L-40℃~+85℃ 1 2.5V 300mV~10V 3uA 4.3V Protection IC Support SOT-23-6L Battery Management ROHSPUOLOPBattery ManagementDMG2301L-7(ES)
SOT-23SOT-23 MOSFETs ROHSElecSuperMOSFETsAP2718AT
SMD-4P,2.8x1.9mm-42dB 0.9mm 1.6V~3.6V 1.85mm 2.75mm 220Ω 57dB 95uA Analog output Omnidirectional Omnidirectional pickup SMD-4P,2.8x1.9mm MEMS Microphones ROHSALLPOWERMEMS MicrophonesFS8205A
SOT-23-6-55℃~+150℃ 1.2V 1.5W 2 N-Channel 20V 31.5mΩ@2.5V 466pF 5.7nC@4.5V 58pF 65pF 6A SOT-23-6 MOSFETs ROHSTECH PUBLICMOSFETsSK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
README
README.mdBiaOpena
a not beerbottleopener
Parts
107| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 4µ7 | Capacitor_SMD:C_0603_1608Metric | C1, C2, C7, C15, C17, C21, C25, C26, C27, C28, C29, C30, C31, C32, C33, C34 +2 |
| 13 | 100K | Resistor_SMD:R_0603_1608Metric | R2, R3, R4, R6, R7, R10, R12, R24, R25, R26, R36, R39, R40 |
| 12 | 100n | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C6, C10, C12, C14, C16, C18, C22, C23, C24 |
| 10 | 0 | Resistor_SMD:R_0603_1608Metric | R30, R31, R32, R33, R34, R35, R37, R38, R41, R42 |
| 9 | 5K1 | Resistor_SMD:R_0603_1608Metric | R8, R9, R13, R16, R17, R18, R19, R22, R23 |
| 7 | 1K | Resistor_SMD:R_0603_1608Metric | R14, R15, R20, R21, R27, R28, R29 |
| 4 | DMG2301L-7 | Package_TO_SOT_SMD:TSOT-23 | Q1, Q2, Q4, Q7 |
| 3 | 220n | Capacitor_SMD:C_0603_1608Metric | C13, C19, C20 |
| 3 | 2u2 | Inductor_SMD:L_1210_3225Metric | L1, L2, L3 |
| 3 | MT3420C-mt3420c | Package_TO_SOT_SMD:SOT-23-6 | U1, U2, U5 |
| 2 | 18650 | Battery:BatteryHolder_Keystone_1042_1x18650 | BT1, BT2 |
| 2 | Conn_01x04_Female | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3, J4 |
| 2 | Q_NPN_BEC | Package_TO_SOT_SMD:SOT-23 | Q5, Q6 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 1µ | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 430K | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 590K | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | ADXL343 | Package_LGA:LGA-14_3x5mm_P0.8mm_LayoutBorder1x6y | U4 |
| 1 | AP2718AT | theBrutzler:AP2718AT | MK1 |
| 1 | Antenna_Dipole | RF_Antenna:Texas_SWRA117D_2.4GHz_Left | AE1 |
| 1 | CH340K | Package_SO:SSOP-10_3.9x4.9mm_P1.00mm | U7 |
| 1 | Conn_01x04_Female | Connector_PinHeader_1.00mm:PinHeader_1x04_P1.00mm_Vertical | J2 |
| 1 | DW01A | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | ESP32-PICO-D4 | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.3x5.3mm | U8 |
| 1 | FS8205A | Package_TO_SOT_SMD:SOT-23-6 | Q3 |
| 1 | Micro_SD_Card_Det | Connector_Card:microSD_HC_Molex_104031-0811 | J1 |
| 1 | SGP30 | theBrutzler:SGP30-DFN6_2,45x2,45_TP | U3 |
| 1 | SK6812MINI | LED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D1 |
| 1 | SYM_Arrow45_Tiny | theBrutzler:Symbol_kurzschlussblog | SM3 |
| 1 | Speaker | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | LS1 |
| 1 | USB_C_Plug_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | P1 |
| 1 | WM8978 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U9 |
Similar boards
- 2 layers192.4 × 50 mm
/Omote.kicad_pcb.jpg?size=s&soon)
- 4 layers85 × 9 mm

OSSG v0p3
aezrapour/RINSIGHT
This version was an attempt to use a 2S battery pack. The main issue is that as of 2022-09-15, there are not many 2S battery charging IC's nor a nice i2C fuel gauge IC, so at the moment, this is a dead end design.
71 partsMIT - 4 layers111.7 × 137 mm

- 4 layers32.3 × 23.3 mm

Smart Watch
dharahaas23/ESP32-Smart-Watch
A round, wrist-worn smart watch built around the ESP32-WROOM-32, with heart-rate sensing, a circular color display, USB-C charging, and a custom PCB antenna — designed as part of the #30DaysOfPCB progression from…
46 parts - 2 layers85.5 × 85.7 mm

- 4 layers84 × 28.8 mm

- 4 layers48.5 × 25 mm

- 4 layers102.7 × 77.6 mm

Espcam
mazyacin/espcam-breakout-board
high end espcam breackout board for IOT and monetering
64 partsMIT
Questions
How big is the BiaOpena PCB?
It measures 44.8 × 88.5 mm and has 4 copper layers, 1.56 mm thick.
What parts does the BiaOpena use?
107 parts, built around the ESP32-PICO-D4, CH340K, SGP30 and ADXL343BCC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BiaOpena KiCad files?
From the theBrutzler/BiaOpena repository on GitHub, at the commit this page was made from: the board is PCB/BIAOPENA.kicad_pcb and its schematic PCB/BIAOPENA.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BiaOpena design in my own project?
Its repository states no licence, so its author keeps all rights: ask theBrutzler before reusing the design.