

Smart Watch
A round, wrist-worn smart watch built around the ESP32-WROOM-32, with heart-rate sensing, a circular color display, USB-C charging, and a custom PCB antenna — designed as part of the #30DaysOfPCB progression from beginner to advanced boards.
- Size
- 32.3 × 23.3 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 68
- Pads
- 227
- Tracks, vias
- 320, 67
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 11 Jul 2026
- Updated
- 11 Jul 2026
Overview
Smart Watch is an open-source printed circuit board by dharahaas23, from the dharahaas23/ESP32-Smart-Watch repository on GitHub. It is a 4-layer board of 32.3 × 23.3 mm with 46 parts on 68 nets, routed with 320 tracks and 67 vias.
It is built around the ESP32-WROOM-32, CH340K and MAX30102, with the AMS1117-3.3, DW01A and TP4056 among its other parts. Its parts include 16 resistors, 8 capacitors, 7 ICs, 3 diodes and 3 switches. It belongs with the wearables and radio and wireless boards and the ESP32 boards of this library.
Main components
7ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesCH340K
ESSOP-10-150mil-1mm-20℃~+70℃ 2Mbps 3.3V、5V USB 2.0 USB to serial ESSOP-10-150mil-1mm USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersMAX30102
-Integrated ambient light cancellation (ALC)、Built-in temperature sensor、With proximity detection function - Heart Rate Sensors ROHSAnalog DevicesHeart Rate SensorsAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsDW01A
SOT-23-6L-40℃~+85℃ 1 2.5V 300mV~10V 3uA 4.3V Protection IC Support SOT-23-6L Battery Management ROHSPUOLOPBattery ManagementTP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery ManagementFS8205A
SOT-23-6-55℃~+150℃ 1.2V 1.5W 2 N-Channel 20V 31.5mΩ@2.5V 466pF 5.7nC@4.5V 58pF 65pF 6A SOT-23-6 MOSFETs ROHSTECH PUBLICMOSFETs
README
README.mdESP32 Smart Watch
A round, wrist-worn smart watch built around the ESP32-WROOM-32, with heart-rate sensing, a circular color display, USB-C charging, and a custom PCB antenna — designed as part of the #30DaysOfPCB progression from beginner to advanced boards.
Overview
| MCU | ESP32-WROOM-32 |
| Display | GC9A01, round TFT (SPI) |
| Heart-rate sensor | MAX30102 (I2C) |
| Charger / protection | TP4056 + DW01A + FS8205A dual MOSFET |
| Regulator | AMS1117-3.3 |
| USB / programming | USB-C, CH340K USB-to-TTL bridge |
| Board shape | Circular, with a keep-out zone and PCB trace antenna for the ESP32 |
| Layers | 4-layer (F.Cu, In1.Cu, In2.Cu, B.Cu) |
| Pads / Vias / Track segments | 227 / 78 / 306 |
| Nets | 68 (fully routed — 0 unrouted) |
Features
- ESP32-WROOM-32 as the main controller, with dedicated
RESET,EN,BOOT, andButtonGPIOs - GC9A01 round display driven over SPI, with separate SDA/SCL/RST/DC/CS lines
- MAX30102 heart-rate/SpO2 sensor on I2C, footprint placed close to the skin-contact edge for optimal readings
- USB-C input for power and CH340K-based UART programming (TXD/RXD/DTR/RTS wired to EN/BOOT for auto-reset)
- TP4056 single-cell Li-ion charge management with DW01A + FS8205A battery protection (over-charge/discharge/current)
- On/off slide switch and separate BOOT and Function push buttons
- Custom PCB trace antenna for the ESP32, isolated behind a defined keep-out zone
- Battery connector (BAT+ / BAT−) for a coin/pouch cell
Design Notes
- Front copper is heavily used for power distribution and the ESP32 antenna keep-out; back copper carries the bulk of signal routing.
- The board silkscreen calls out
PLACE CLOSE TO THE SKINnext to the MAX30102 footprint as a placement reminder for future revisions/enclosure design. - Bottom silk includes maker/GitHub branding (
GitHub:dharahaas23) and a "Designed with KiCad" mark.
Tools
- KiCad 10.0.1 — schematic capture, PCB layout, and 3D visualization
Author
S. Dharahaas GitHub: @dharahaas23
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C7, C10 |
| 4 | 1k | Resistor_SMD:R_0805_2012Metric | R5, R8, R11, R12 |
| 4 | 4.7K | Resistor_SMD:R_0805_2012Metric | R13, R14, R15, R16 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric | R6, R7, R17 |
| 3 | LED | Resistor_SMD:R_0805_2012Metric | D1, D2, D3 |
| 2 | 1.2k | Resistor_SMD:R_0805_2012Metric | R9, R10 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C4, C5 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_TS-1088-xR025 | SW1, SW2 |
| 1 | |||
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | BATTERY PINS | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J2 |
| 1 | CH340K | Package_SO:SSOP-10-1EP_3.9x4.9mm_P1mm_EP2.1x3.3mm | U6 |
| 1 | DW01A | Package_TO_SOT_SMD:SOT-23-6 | U7 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U4 |
| 1 | FS8205A | FS8205A:SOP65P640X120-8N | Q1 |
| 1 | LOGO | LOGO | G*** |
| 1 | MAX30102 | OptoDevice:Maxim_OLGA-14_3.3x5.6mm_P0.8mm | U1 |
| 1 | SW_DIP_x01 | Button_Switch_SMD:SW_SPDT_PCM12 | SW3 |
| 1 | TP4056 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U5 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
| 1 | ~ | Custom Library:Round display(mini) | U2 |
The 42 most common of 46 parts.
Similar boards
- 2 layers150 × 40 mm

- 2 layers60 × 40 mm

Cargofy IoT Node
Afuu-coder/Cargofy
🚚 Cargofy — AI-Powered Cold Chain Intelligence Platform | Autonomous Rerouting Agent | Google ADK | ULIP Integration | FAR AWAY 2026 Hackathon
41 parts - 2 layers78 × 92 mm

ESPCARproject
Sumya99/RobotCarPCB
NAND сургалтын төвийн сурагчдад зориулсан робот машины PCB төсөл
92 parts - 2 layers97.6 × 51.6 mm

- 2 layers61 × 61 mm

- 2 layers85.4 × 56.5 mm

- 4 layers38 × 65 mm

FelineWatchdog
Paschalis/FelineWatchdog
An ESP32-based system to alert you when your cat goes missing. Monitors Wi-Fi connection between your cat's collar-mounted ESP32 device and an embedded system.
33 partsGPL-3.0 - 2 layers50 × 97.5 mm

MiniMorse
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
55 parts915
Questions
How big is the Smart Watch PCB?
It measures 32.3 × 23.3 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Smart Watch use?
46 parts, built around the ESP32-WROOM-32, CH340K, MAX30102 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Smart Watch KiCad files?
From the dharahaas23/ESP32-Smart-Watch repository on GitHub, at the commit this page was made from: the board is Smart Watch.kicad_pcb and its schematic Smart Watch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Smart Watch design in my own project?
Its repository states no licence, so its author keeps all rights: ask dharahaas23 before reusing the design.