Skip to the content
PCBKitNew board

Boards using the MOC3052M

13 boards

Boards in 13 GitHub repositories, designed in KiCad, that use the MOC3052M by onsemi (-40℃~+85℃ 1 1.5V 1000V/us 1A 330mW 4.17kV 6 600V 60mA No TRIAC DIP-6 Triac, SCR Output Optoisolators ROHS). See how each wires it, with its parts, size, README and files; the MOC3052M’s symbol, footprint and pinout are on its own page.

  • 2 layers99.1 × 76.2 mmSsr, the printed circuit board in 3D

    Ssr

    Miceuz/triac-bloc

    An universal power block based on triac. In essence this is a solid state relay with some bells and whistles

    39 parts54
  • 2 layers74.7 × 33.5 mmDimmer, the printed circuit board in 3D

    Dimmer

    n3rd-bugs/weird-rtos

    This is a not so small RTOS for low end MCUs.

    23 parts5
  • 2 layers41 × 38 mmRS Board, the printed circuit board in 3D

    RS Board

    VGCH/radar_switch

    DIY module for lighting control with radar sensor

    35 parts5
  • 2 layers79.1 × 56.3 mmFan reg, the printed circuit board in 3D

    Fan reg

    VGCH/smart_fan

    Smart controller for fan

    41 parts4
  • 2 layers73.2 × 81.3 mmFurnace control, the printed circuit board in 3D

    Furnace control

    marcass/furnace_control

    Control a FUWI pellet boiler with arduino to improve smarts

    24 parts2GPL-3.0
  • 2 layers59.9 × 103.5 mmHM AsksinPP Phasenanschnitt, the printed circuit board in 3D

    HM AsksinPP Phasenanschnitt

    mankut80/AskSinPP_HM-LC-Dim1L-CV

    Mit der Technik des Phasenanschnitts lassen sich ohmsche und induktive Wechselstromlasten in der Leistung steuern.

    36 parts1
  • 2 layers100 × 75 mmSousvide, the printed circuit board in 3D

    Sousvide

    gregorv/sousvide

    Hardware and software for an ATmega8 based Sous-Vide temperature controller

    66 partsGPL-3.0
  • 4 layers100.1 × 79.2 mmSolder oven PCB, the printed circuit board in 3D

    Solder oven PCB

    JuanDavidBarrero/SolderingOvenPCB

    44 parts
  • 4 layers355.6 × 144.8 mmCycloconverter, the printed circuit board in 3D

    Cycloconverter

    Moeletsi47/cycloconverter

    An embedded power-electronics project combining SCR switching, zero-crossing synchronisation, register-level C firmware, and a custom four-layer PCB designed in KiCad.

    70 parts
  • 2 layers120 × 100 mmSsr pcb, the printed circuit board in 3D

    Ssr pcb

    Pharmaceutical-Analysis/Rpi-GC-Oven-Controller

    A RPi4/ RPico based synchronised multi oven controller with an optional ATTiny based power stage

    62 parts
  • 2 layers100 × 100 mmEsp32 dimmer, the printed circuit board in 3D

    Esp32 dimmer

    fborello-lambda/pcbs_llm_driven_design

    🔌 PCBs made with LLMs

    23 parts1MIT
  • 2 layers85 × 90 mmFurnace 230V, the printed circuit board in 3D

    Furnace 230V

    brrastak/furnace

    Schematics of furnace for glass fusing

    82 parts