Skip to the content
123456

MOC3052M

onsemiExtended

-40℃~+85℃ 1 1.5V 1000V/us 1A 330mW 4.17kV 6 600V 60mA No TRIAC DIP-6 Triac, SCR Output Optoisolators ROHS

Part id
onsemi/MOC3052M
Category
Triac, SCR Output Optoisolators
Package
DIP-6
Pins
6
In stock
14,907 at JLCPCB (C8965)
Used on
13 open-source boards

Overview

The MOC3052M is a triac, SCR Output Optoisolator made by onsemi in a DIP-6 package with 6 pins. -40℃~+85℃ 1 1.5V 1000V/us 1A 330mW 4.17kV 6 600V 60mA No TRIAC DIP-6 Triac, SCR Output Optoisolators ROHS.

PCBKit's library has its KiCad symbol (Relay_SolidState:MOC3052M, from KiCad's library) and its footprint (Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 14,907 are in stock at JLCPCB (part C8965). 13 open-source boards in 13 repositories on GitHub use it.

Symbol

1246
Relay_SolidState:MOC3052MFrom KiCad's library

Footprint

123456
Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

6
The pins of the MOC3052M
PinNameType
1—Passive
2—Passive
3NCNot connected
4—Passive
5NCNot connected
6—Passive

Open-source boards using it

13See all 13
  • 2 layers99.1 × 76.2 mmSsr, the printed circuit board in 3D

    Ssr

    Miceuz/triac-bloc

    An universal power block based on triac. In essence this is a solid state relay with some bells and whistles

    39 parts54
  • 2 layers74.7 × 33.5 mmDimmer, the printed circuit board in 3D

    Dimmer

    n3rd-bugs/weird-rtos

    This is a not so small RTOS for low end MCUs.

    23 parts5
  • 2 layers41 × 38 mmRS Board, the printed circuit board in 3D

    RS Board

    VGCH/radar_switch

    DIY module for lighting control with radar sensor

    35 parts5
  • 2 layers79.1 × 56.3 mmFan reg, the printed circuit board in 3D

    Fan reg

    VGCH/smart_fan

    Smart controller for fan

    41 parts4
  • 2 layers73.2 × 81.3 mmFurnace control, the printed circuit board in 3D

    Furnace control

    marcass/furnace_control

    Control a FUWI pellet boiler with arduino to improve smarts

    24 parts2GPL-3.0
  • 2 layers59.9 × 103.5 mmHM AsksinPP Phasenanschnitt, the printed circuit board in 3D

    HM AsksinPP Phasenanschnitt

    mankut80/AskSinPP_HM-LC-Dim1L-CV

    Mit der Technik des Phasenanschnitts lassen sich ohmsche und induktive Wechselstromlasten in der Leistung steuern.

    36 parts1
  • 2 layers100 × 75 mmSousvide, the printed circuit board in 3D

    Sousvide

    gregorv/sousvide

    Hardware and software for an ATmega8 based Sous-Vide temperature controller

    66 partsGPL-3.0
  • 4 layers100.1 × 79.2 mmSolder oven PCB, the printed circuit board in 3D

    Solder oven PCB

    JuanDavidBarrero/SolderingOvenPCB

    44 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MOC3052M?

Yes. The symbol is Relay_SolidState:MOC3052M and the footprint Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MOC3052M?

DIP-6, with 6 pins. Its footprint is drawn on this page.

Where is the MOC3052M datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the MOC3052M?

JLCPCB lists it as part C8965, with 14,907 in stock; the sellers' links on this page open their listings.

What can replace the MOC3052M?

Parts like it in the library: the EL3053 by Everlight Electronics, the MOC3052 by Lite-On, the MOC3053M(UMW) by UMW and the MOC3081M(UMW) by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MOC3052M?

13 boards in 13 repositories on GitHub; the most starred are listed on this page, with their KiCad files.