2 layers99 × 43 mm
2 layers79.1 × 56.3 mm
Fan reg
VGCH/smart_fan4Smart controller for fan
- Size
- 79.1 × 56.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 50
- Pads
- 124
- Tracks, vias
- 234, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 27 Jun 2024
- Updated
- 3 Jul 2024
Overview
Fan reg is an open-source printed circuit board by VGCH, from the VGCH/smart_fan repository on GitHub. It is a 2-layer board of 79.1 × 56.3 mm with 41 parts on 50 nets, routed with 234 tracks and 0 vias.
It is built around the ESP-12F, BT136-600E and LNK306GN, with the MOC3052M, 1N4007W and RMB4S among its other parts. Its parts include 17 resistors, 6 capacitors, 6 diodes, 5 connectors and 4 ICs. It belongs with the ESP8266 boards of this library.
Main components
6
ESP-12F
SMD,24x16mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,24x16mm WiFi Modules ROHSDOITWiFi Modules
BT136-600E
TO-220-40℃~+125℃@(Tj) 1 TRIAC 1.5V 1.5W 1.7V 10mA 15mA 30A 4A 600V TO-220 Thyristors (SCR)/Modules ROHSJSMSEMIThyristors (SCR)/Modules
LNK306GN
SMD-7P-40℃~+150℃ 360mA 62kHz~70kHz 69% 700V Flyback、Buck Non-Isolated Over Current Protection、Short Circuit Protection、Overtemperature protection (OTP) SMD-7P AC-DC Controllers and Regulators ROHSPOWER INTEGRATIONSAC-DC Controllers And Regulators
MOC3052M
DIP-6-40℃~+85℃ 1 1.5V 1000V/us 1A 330mW 4.17kV 6 600V 60mA No TRIAC DIP-6 Triac, SCR Output Optoisolators ROHSonsemiTriac, SCR Output Optoisolators
1N4007W
SOD-123FLDiodes - General Purposehongjiacheng
RMB4S
MBS-55℃~+150℃@(Tj) 1V@400mA 30A 400V 500mA 5uA@400V Single-Phase Rectifier MBS Bridge Rectifiers ROHSTaiwan SemiconductorBridge Rectifiers
README
README.mdПроект домашней автоматизации вытяжной вентиляции
Принципиальная схема
Полное описание в статье на Хабр
Если данный проект был вам полезен, то вы можете задонатить разработчику на кофе.
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1k | Resistor_SMD:R_0805_2012Metric | R9, R10, R11, R13 |
| 2 | 10 | Resistor_SMD:R_1206_3216Metric | R2, R12 |
| 2 | 100uF 16V | Capacitor_SMD:CP_Elec_5x5.4 | C4, C5 |
| 2 | 30k | Resistor_SMD:R_1206_3216Metric | R3, R4 |
| 2 | 470 | Resistor_SMD:R_0805_2012Metric | R14, R15 |
| 2 | LED | LED_SMD:LED_1206_3216Metric | D5, D6 |
| 2 | UF4005 US1J | Diode_SMD:D_MELF | D2, D4 |
| 1 | 1.5k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 100n | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | 10n | Capacitor_SMD:C_1206_3216Metric | C6 |
| 1 | 10uF 16V | Capacitor_SMD:CP_Elec_5x5.4 | C3 |
| 1 | 10uF 400V | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C1 |
| 1 | 1N4007W | Diode_SMD:D_MELF | D3 |
| 1 | 2.2k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 2k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 39 | Resistor_SMD:R_1206_3216Metric | R17 |
| 1 | 4.7k | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | 470mH | Inductor_THT:L_Axial_L9.5mm_D4.0mm_P2.54mm_Vertical_Fastron_SMCC | L1 |
| 1 | 600 | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | BT136-600 | Package_TO_SOT_SMD:TO-252-2 | Q1 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_PUI_AT-0927-TT-6-R | BZ1 |
| 1 | ESP-12F | RF_Module:ESP-12E | U4 |
| 1 | FAN | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | LNK306G | Package_DIP:PowerIntegrations_SMD-8B | U1 |
| 1 | MOC3052M | Package_DIP:DIP-6_W7.62mm | U3 |
| 1 | PC817 | OptoDevice:Panasonic_APV-AQY_SSOP-4_4.45x2.65mm_P1.27mm | U2 |
| 1 | RMB4S | Package_TO_SOT_SMD:TO-269AA | D1 |
| 1 | input 240V AC | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | ~ | TerminalBlock:TerminalBlock_bornier-5_P5.08mm | J6 |
| 1 | Выход | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J4 |
| 1 | Сигнал управления (Signal On/Off FAN) | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |
Questions
How big is the Fan reg PCB?
It measures 79.1 × 56.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fan reg use?
41 parts, built around the ESP-12F, BT136-600E, LNK306GN and MOC3052M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fan reg KiCad files?
From the VGCH/smart_fan repository on GitHub, at the commit this page was made from: the board is fan_reg/fan_reg.kicad_pcb and its schematic fan_reg/fan_reg.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fan reg design in my own project?
Its repository states no licence, so its author keeps all rights: ask VGCH before reusing the design.
Similar boards
- 2 layers41 × 38 mm
- 2 layers125.5 × 79 mm
PeterThePowerMeter
CtrlAltJon/PeterThePowerMeter
IoT Power Meter for real-time energy monitoring. Includes a local color display, acoustic alarms, and a web interface for smart home integration (Home Assistant/MQTT).
79 parts1MIT - 2 layers99.1 × 76.2 mm
Ssr
Miceuz/triac-bloc
An universal power block based on triac. In essence this is a solid state relay with some bells and whistles
39 parts54 - 2 layers74.7 × 33.5 mm
- 2 layers73.2 × 81.3 mm
Furnace control
marcass/furnace_control
Control a FUWI pellet boiler with arduino to improve smarts
24 parts2GPL-3.0 - 2 layers59.9 × 103.5 mm
HM AsksinPP Phasenanschnitt
mankut80/AskSinPP_HM-LC-Dim1L-CV
Mit der Technik des Phasenanschnitts lassen sich ohmsche und induktive Wechselstromlasten in der Leistung steuern.
36 parts1 - 2 layers100 × 75 mm
Sousvide
gregorv/sousvide
Hardware and software for an ATmega8 based Sous-Vide temperature controller
66 partsGPL-3.0