Skip to the content

Boards using the LM393DR2GH

16 boards

Boards in 13 GitHub repositories, designed in KiCad, that use the LM393DR2GH by onsemi (ESD Protection SOP-8 Comparators ROHS). See how each wires it, with its parts, size, README and files; the LM393DR2GH’s symbol, footprint and pinout are on its own page.

  • 4 layers58 × 77.4 mmAWG, the printed circuit board in 3D

    AWG

    MatthiasElectronic/AWG_DHO8-900

    artificial waveform generator / function generator for DHO800 and DHO900 series (AWG/AFG)

    208 parts221CERN-OHL-W-2.0
  • 2 layers31.1 × 34.5 mmOpenThermMonitorTwomes, the printed circuit board in 3D

    OpenThermMonitorTwomes

    energietransitie/twomes-opentherm-monitor-hardware

    Open hardware design files for the Twomes OpenTherm Monitor device

    28 parts3
  • 6 layers49.6 × 103 mmAnalogue board pico revb routed, the printed circuit board in 3D

    Analogue board pico revb routed

    Eight4aWish/eurorack_electronics

    Analogue designs and breadboard layouts: the Dual Pingable LPG, and the board behind Boy.

    361 parts1
  • 4 layers100 × 70 mmSEM, the printed circuit board in 3D

    SEM

    Serhio4522/SEM_hitachi-

    Digitization of a Hitachi scanning electron microscope (SEM) — hardware design, FPGA firmware, and analog frontend schematics.

    288 parts1
  • 2 layers100 × 100 mmAudio in usd sound rp pico, the printed circuit board in 3D

    Audio in usd sound rp pico

    snarrn/Raspberry_Pi_Pico_MultiBoard

    This is a PCB with OLED, LaserTag, two Radio Receivers, Oscillotor, Sound Card for PC, Smoke Detector, LEDs, Maze Game, Accelerometer, Motor/Speaker Drivers, two Proximity Detecters, Thermometer, Photo Detector, Etc.

    275 parts1MIT
  • 4 layers100 × 100 mmSmc power, the printed circuit board in 3D

    Smc power

    efebasol/StepperMotorController

    Rev A — single-motor bench prototype power board. Feeds the driver board (48 V), the stepper motor brake (24 V) and the logic (5 V / 3V3).

    104 parts
  • 2 layers96 × 70 mmEEE3088F HAT, the printed circuit board in 3D

    EEE3088F HAT

    rb-jones/EEE3088F_HAT

    See a 3D render of the PCB from KiCad below,

    84 partsCC-BY-4.0
  • 4 layers250 × 90 mmVCU V2, the printed circuit board in 3D

    VCU V2

    shutianx180/mk12-vcu-pcb

    366 parts
  • 2 layers46.7 × 30.9 mmUw rs485 hat V5, the printed circuit board in 3D

    Uw rs485 hat V5

    tomrodinger/Raspberry_Pi_HAT_RS485

    This is a Raspberry Pi HAT for RS485 communication with external devices and it should fit into any Raspberry Pi like Zero/Zero2W/3/4

    54 partsApache-2.0
  • 2 layers36.9 × 48.9 mmRS485 Controller, the printed circuit board in 3D

    RS485 Controller

    tomrodinger/RS485_Controller

    This integrates an ESP32-S3 module with an RS485 interface, so that it can be used to control Gearotons Servomotors or other RS485 devices

    113 partsMIT
  • 2 layers32.8 × 32.1 mmSCS IMD AMD indicator, the printed circuit board in 3D

    SCS IMD AMD indicator

    EOSCogniton/ELIZ-2022

    Le Git Artemiz de l'EPSA. Contient le Catia, ainsi que la documentation en cours et quelques modèles.

    23 parts4
  • 6 layers49.6 × 103 mmAnalogue board pico core routed, the printed circuit board in 3D

    Analogue board pico core routed

    Eight4aWish/eurorack_electronics

    Analogue designs and breadboard layouts: the Dual Pingable LPG, and the board behind Boy.

    354 parts1
  • 2 layers36.9 × 48.9 mmRS485 Controller, the printed circuit board in 3D

    RS485 Controller

    tomrodinger/RS485_Controller

    This integrates an ESP32-S3 module with an RS485 interface, so that it can be used to control Gearotons Servomotors or other RS485 devices

    109 partsMIT
  • 2 layers46.7 × 30.9 mmV1 not completed, the printed circuit board in 3D

    V1 not completed

    tomrodinger/RS485_Controller

    This integrates an ESP32-S3 module with an RS485 interface, so that it can be used to control Gearotons Servomotors or other RS485 devices

    64 partsMIT
  • 2 layers55.2 × 39.7 mmBuck, the printed circuit board in 3D

    Buck

    WidRojas/PCB-Hardware-Projects

    Repo containing all PCB files alongside short project descriptions

    37 parts