Skip to the content
12345678

LM393DR2GH

onsemiExtended

ESD Protection SOP-8 Comparators ROHS

Part id
onsemi/LM393DR2GH
Category
Comparators
Package
SOP-8
Pins
8
In stock
0 at JLCPCB (C903810)
Used on
16 open-source boards

Overview

The LM393DR2GH is a comparator made by onsemi in a SOP-8 package with 8 pins. ESD Protection SOP-8 Comparators ROHS.

PCBKit's library has its KiCad symbol (Comparator:LM393, from KiCad's library) and its footprint (Package_SO:SOP-8_3.76x4.96mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C903810). 16 open-source boards in 13 repositories on GitHub use it.

Symbol

12-3+
Comparator:LM393From KiCad's library

Footprint

12345678
Package_SO:SOP-8_3.76x4.96mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the LM393DR2GH
PinNameType
1—Open collector
2-Input
3+Input
4V-Power in
5+Input
6-Input
7—Open collector
8V+Power in

Open-source boards using it

16See all 16
  • 4 layers58 × 77.4 mmAWG, the printed circuit board in 3D

    AWG

    MatthiasElectronic/AWG_DHO8-900

    artificial waveform generator / function generator for DHO800 and DHO900 series (AWG/AFG)

    208 parts221CERN-OHL-W-2.0
  • 2 layers31.1 × 34.5 mmOpenThermMonitorTwomes, the printed circuit board in 3D

    OpenThermMonitorTwomes

    energietransitie/twomes-opentherm-monitor-hardware

    Open hardware design files for the Twomes OpenTherm Monitor device

    28 parts3
  • 6 layers49.6 × 103 mmAnalogue board pico revb routed, the printed circuit board in 3D

    Analogue board pico revb routed

    Eight4aWish/eurorack_electronics

    Analogue designs and breadboard layouts: the Dual Pingable LPG, and the board behind Boy.

    361 parts1
  • 4 layers100 × 70 mmSEM, the printed circuit board in 3D

    SEM

    Serhio4522/SEM_hitachi-

    Digitization of a Hitachi scanning electron microscope (SEM) — hardware design, FPGA firmware, and analog frontend schematics.

    288 parts1
  • 2 layers100 × 100 mmAudio in usd sound rp pico, the printed circuit board in 3D

    Audio in usd sound rp pico

    snarrn/Raspberry_Pi_Pico_MultiBoard

    This is a PCB with OLED, LaserTag, two Radio Receivers, Oscillotor, Sound Card for PC, Smoke Detector, LEDs, Maze Game, Accelerometer, Motor/Speaker Drivers, two Proximity Detecters, Thermometer, Photo Detector, Etc.

    275 parts1MIT
  • 4 layers100 × 100 mmSmc power, the printed circuit board in 3D

    Smc power

    efebasol/StepperMotorController

    Rev A — single-motor bench prototype power board. Feeds the driver board (48 V), the stepper motor brake (24 V) and the logic (5 V / 3V3).

    104 parts
  • 2 layers96 × 70 mmEEE3088F HAT, the printed circuit board in 3D

    EEE3088F HAT

    rb-jones/EEE3088F_HAT

    See a 3D render of the PCB from KiCad below,

    84 partsCC-BY-4.0
  • 4 layers250 × 90 mmVCU V2, the printed circuit board in 3D

    VCU V2

    shutianx180/mk12-vcu-pcb

    366 parts

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the LM393DR2GH?

Yes. The symbol is Comparator:LM393 and the footprint Package_SO:SOP-8_3.76x4.96mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM393DR2GH?

SOP-8, with 8 pins. Its footprint is drawn on this page.

Where is the LM393DR2GH datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the LM393DR2GH?

JLCPCB lists it as part C903810, with 0 in stock; the sellers' links on this page open their listings.

What can replace the LM393DR2GH?

Parts like it in the library: the LM393 by Gcore. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM393DR2GH?

16 boards in 13 repositories on GitHub; the most starred are listed on this page, with their KiCad files.