
Stream
myriadrf/STREAM
FPGA development platform for high-performance RF and digital design
Boards in 13 GitHub repositories, designed in KiCad, that use the BSS138PS by Nexperia (1.5V 1.6Ω@10V 2 N-Channel 320mA 420mW 50pF 60V 800pC@4.5V SOT-363(SC-88) MOSFETs ROHS). See how each wires it, with its parts, size, README and files; the BSS138PS’s symbol, footprint and pinout are on its own page.

myriadrf/STREAM
FPGA development platform for high-performance RF and digital design


AlfredoSystems/Rotini-Hardware
📖 Documentation: https://www.alfredosys.com/Rotini-Hardware/ (pinout, power limits, flashing ExpressLRS, first Arduino upload)

Duckle29/InKli
An ESP32-WROOM32 backpack for an SCD30. Uses a high effeciency Buck converter to try and avoid self heating.

mh21/breadboard-adapters
Various small schematics + PCBs for prototyping on breadboards

Ccecil/6-Axis-Breakout
Breakout board for the V2 Smoothieboard which allows expansion to 6 axis. Also has a header intended to add a secondary breakout for retrofitting parallel port driven machines

dovy6/Faiked
This project is subject to the licence in the LICENCE file, and even if that says it is an open source project, you cannot sell boards or cases bearing the Andrews & Arnold Ltd name, the A&A logo, the registered…

fulgidus/hardware
Learning KiCad takes time, and pollutes with weird and incomplete projects. Here they are...
jonaschramm/race-tracker
Custom PCB data logger for motorcycle racing: GPS position + IMU motion data, logged to a microSD card, with an e-Paper status display. Built around an ESP32-S3 (WiFi/BT built in) so it can also stream/sync over WiFi.

Rsa76d/FaikoutRSA
This project is subject to the licence in the LICENCE file, and even if that says it is an open source project, you cannot sell boards or cases bearing the Andrews & Arnold Ltd name, the A&A logo, the registered…



dovy6/Faiked
This project is subject to the licence in the LICENCE file, and even if that says it is an open source project, you cannot sell boards or cases bearing the Andrews & Arnold Ltd name, the A&A logo, the registered…

piersfinlayson/pico1541-rs
A port of the OpenCBM xum1541 firmware to the Raspberry Pi Pico, in Rust using `embassy`.

Rsa76d/FaikoutRSA
This project is subject to the licence in the LICENCE file, and even if that says it is an open source project, you cannot sell boards or cases bearing the Andrews & Arnold Ltd name, the A&A logo, the registered…