2 layers7 × 8.6 mm
Tps709-breadboard adapter
mh21/breadboard-adapters
Various small schematics + PCBs for prototyping on breadboards
4 parts1CC-BY-4.0
2 layers10.2 × 12.7 mm
Serial breadboard adapter
mh21/breadboard-adapters1Various small schematics + PCBs for prototyping on breadboards
- Size
- 10.2 × 12.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 10
- Pads
- 38
- Tracks, vias
- 121, 7
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 30 Mar 2017
- Updated
- 8 Apr 2017
Overview
Serial breadboard adapter is an open-source printed circuit board by mh21, from the mh21/breadboard-adapters repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 10.2 × 12.7 mm with 12 parts on 10 nets, routed with 121 tracks and 7 vias.
It is built around the BSS138PS. Its parts include 8 resistors, 2 transistors and 2 connectors. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdbreadboard-adapters
Various small schematics + PCBs for prototyping on breadboards
TPS709xx breadboard adapter
TPS709xx breadboard adapter based on the reference design of the TI datasheet.
2 layer board of 0.31x0.34 inches (7.77x8.66 mm).
Details: TI datasheet
BOM:
- 1x TPS709xx voltage regulator
- 1x 3x1 pin headers
- 1x 1u 25V X7R capacitor, 0805
- 1x 2u2 10V X7R capacitor, 0805
Breadboard level shifter
4x breadboard level shifter similar to Sparkfun #12009 and Adafruit #757.
2 layer board of 0.40x0.50 inches (10.21x12.75 mm)
Details: NXP app note AN10441
BOM:
- 2x BSS138PS, SOT-363
- 2x 5x1 pin headers
- 8x 10k resistors, 0603
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | Resistors_SMD:R_0603_HandSoldering | R1, R2, R3, R4, R5, R6, R7, R8 |
| 2 | BSS138PS | TO_SOT_Packages_SMD:SOT-363_SC-70-6_Handsoldering | Q1, Q2 |
| 1 | HV | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | J2 |
| 1 | LV | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | J1 |
More from mh21/breadboard-adapters
1Similar boards
- 12 layers130 × 145 mm
Stream
myriadrf/STREAM
FPGA development platform for high-performance RF and digital design
1,240 parts31 - 2 layers
- 4 layers47 × 21.6 mm
Rotini Hardware
AlfredoSystems/Rotini-Hardware
📖 Documentation: https://www.alfredosys.com/Rotini-Hardware/ (pinout, power limits, flashing ExpressLRS, first Arduino upload)
116 parts3MIT - 2 layers59.2 × 39.4 mm
Scd30 esp
Duckle29/InKli
An ESP32-WROOM32 backpack for an SCD30. Uses a high effeciency Buck converter to try and avoid self heating.
63 parts1 - 4 layers80 × 80 mm
6-Axis Breakout
Ccecil/6-Axis-Breakout
Breakout board for the V2 Smoothieboard which allows expansion to 6 axis. Also has a header intended to add a secondary breakout for retrofitting parallel port driven machines
103 parts - 2 layers58 × 36 mm
Faikout
dovy6/Faiked
This project is subject to the licence in the LICENCE file, and even if that says it is an open source project, you cannot sell boards or cases bearing the Andrews & Arnold Ltd name, the A&A logo, the registered…
83 partsGPL-3.0 - 4 layers26.2 × 76.2 mm
Power sink only
fulgidus/hardware
Learning KiCad takes time, and pollutes with weird and incomplete projects. Here they are...
179 parts - 4 layers50.2 × 72.4 mm
RaceTracker
jonaschramm/race-tracker
Custom PCB data logger for motorcycle racing: GPS position + IMU motion data, logged to a microSD card, with an e-Paper status display. Built around an ESP32-S3 (WiFi/BT built in) so it can also stream/sync over WiFi.
135 parts
Questions
How big is the Serial breadboard adapter PCB?
It measures 10.2 × 12.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Serial breadboard adapter use?
12 parts, built around the BSS138PS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Serial breadboard adapter KiCad files?
From the mh21/breadboard-adapters repository on GitHub, at the commit this page was made from: the board is serial/serial-breadboard-adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Serial breadboard adapter design in my own project?
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).