Skip to the content

Boards using the AT24CS64-MAHM-T

2 boards

Boards in 2 GitHub repositories, designed in KiCad, that use the AT24CS64-MAHM-T by Microchip Technology (-40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 100 Years 1MHz 3mA 5ms 64Kbit 6uA 900ns Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C UDFN-8-EP(2x3) EEPROM ROHS). See how each wires it, with its parts, size, README and files; the AT24CS64-MAHM-T’s symbol, footprint and pinout are on its own page.

  • 4 layers65 × 56.5 mmHAT+, the printed circuit board in 3D

    HAT+

    cvaldess/Rpi3FanHatPlus

    Raspberry Pi 5 HAT+: EMC2303 controller for 3 case fans + GNSS (UART/PPS) breakout. KiCad 10, CERN-OHL-S v2.

    41 partsCERN-OHL-S-2.0
  • 4 layers65 × 56.5 mmHAT+, the printed circuit board in 3D

    HAT+

    Digital-Naturalism-Laboratories/Mothbox_Electronics

    This is where the electronics for the Mothbox are developed, such as the PCB! It's copied over from https://github.com/Digital-Naturalism-Laboratories/Mothbox/tree/main/Hardware/PCB so you can check that out if you want…

    15 parts3MIT