
HAT+
cvaldess/Rpi3FanHatPlus
Raspberry Pi 5 HAT+: EMC2303 controller for 3 case fans + GNSS (UART/PPS) breakout. KiCad 10, CERN-OHL-S v2.

Microchip Technology
-40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 100 Years 1MHz 3mA 5ms 64Kbit 6uA 900ns Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C UDFN-8-EP(2x3) EEPROM ROHS
The AT24CS64-MAHM-T is an EEPROM made by Microchip Technology in a UDFN-8-EP(2x3) package with 9 pins. -40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 100 Years 1MHz 3mA 5ms 64Kbit 6uA 900ns Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C UDFN-8-EP(2x3) EEPROM ROHS.
PCBKit's library has its KiCad symbol (Memory_EEPROM:AT24CS64-MAHM, from KiCad's library) and its footprint (Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.3x1.5mm, from KiCad's library), ready for a KiCad board. 388 are in stock at JLCPCB (part C2061553). 2 open-source boards in 2 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | A0 | Input |
| 2 | A1 | Input |
| 3 | A2 | Input |
| 4 | GND | Power in |
| 5 | SDA | Input/output |
| 6 | SCL | Input |
| 7 | WP | Input |
| 8 | VCC | Power in |
| 9 | GND | Passive |

cvaldess/Rpi3FanHatPlus
Raspberry Pi 5 HAT+: EMC2303 controller for 3 case fans + GNSS (UART/PPS) breakout. KiCad 10, CERN-OHL-S v2.

Digital-Naturalism-Laboratories/Mothbox_Electronics
This is where the electronics for the Mothbox are developed, such as the PCB! It's copied over from https://github.com/Digital-Naturalism-Laboratories/Mothbox/tree/main/Hardware/PCB so you can check that out if you want…
<iframe src="https://pcbkit.io/embed/parts/microchip/AT24CS64-MAHM-T" title="AT24CS64-MAHM-T in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/microchip/AT24CS64-MAHM-T.jpg" alt="AT24CS64-MAHM-T" width="1200" height="900">[](https://pcbkit.io/parts/microchip/AT24CS64-MAHM-T)Yes. The symbol is Memory_EEPROM:AT24CS64-MAHM and the footprint Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.3x1.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
UDFN-8-EP(2x3), with 9 pins. Its footprint is drawn on this page.
Microchip Technology publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C2061553, with 388 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the AT24CS02-MAHM-T by Microchip Technology, the AT24CS01-MAHM-T by Microchip Technology, the AT24CS32-MAHM-T by Microchip Technology and the AT24CS16-MAHM-E by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.