Boards using the AT24C64D-SSHM-T

11 boards

Boards in 11 GitHub repositories, designed in KiCad, that use the AT24C64D-SSHM-T by Microchip Technology (-40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 100 Years 1MHz 5ms 64Kbit Hardware write protection function、Noise suppression function I2C SOIC-8 EEPROM ROHS). See how each wires it, with its parts, size, README and files; the AT24C64D-SSHM-T’s symbol, footprint and pinout are on its own page.

8 layers110 × 181.8 mm
Zest
BerkeleyLab/Zest
Zest is a FMC mezzanine board with 8 ADC channels and 2 DACs
441 parts12
6 layers84 × 69 mm
Clk input fmc
osprey-dcs/clk-input-fmc
Clock Input FMC board design
164 parts1
2 layers100 × 100 mm
Temp pro
CrafterSteve/ESP32_Temp_Con
An temperture control device, based on ESP32. With custom PCB board, it can fit an ESP32-DevKit as controller, DAC and ADC is done on board, as well as, a 5 to +-12v power supply..
134 parts
4 layers64.6 × 55.2 mm
Whisker
HeyPCB/whisker
Drop-in controller for Petoi's Nybble robot cat running the stock OpenCat firmware: ATmega328P, PCA9685, MPU-6050, USB-C, 3 A buck, protected battery input. 4-layer KiCad 10 board plus printed cradle.
118 partsCERN-OHL-S-2.0
4 layers100 × 60 mm
Ephys test module-64
open-ephys/ephys-test-module-hirose-df40-64-chan
Test module for headstages using Hirose DF40C-70DP-0.4V(51) electrode interface
25 parts
2 layers100 × 60 mm
Ephys test module molc-64-chan
open-ephys/ephys-test-module-molc-64-chan
Test module for headstages compatible with the NanoZ/MOLC-110-01-S-Q_1 electrode interface
20 parts
2 layers106.9 × 69 mm
Ephys test module molex-504070-32
open-ephys/ephys-test-module-molex-504070-32-chan
Test module for headstages using Molex 504070 electrode interface
19 parts
2 layers100 × 60 mm
Ephys test module-32
open-ephys/ephys-test-module-omnetics-a79026-001-32-chan
Test module for headstages using Omnetics A79026-001 electrode interface
16 parts
6 layers254 × 130 mm
Quartz
osprey-dcs/Quartz
Quartz ADC PCB OSH repository
1,244 parts
4 layers80 × 74.5 mm
GSM STM
reljamar/MQTT-GSM-receiver
A basic IoT device that connects to a mobile network and activates an output pin based on an MQTT message
108 partsMIT
4 layers80 × 80 mm
03-导入EasyEDA
superfansizhe-beep/tscircuit-stm32f302-board
STM32F302R8T6 考核板 —— 用 tscircuit 以 TypeScript 描述原理图与 PCB，9 页分页、4 层板、含完整交付物
84 parts