4 layers38 × 39 mm
CLN17-V1.5
creapunk/CLN-ClosedLoopNemaDriver
Compact closed-loop stepper motor driver designed for NEMA motors
103 parts1.1k
Boards using the SMBJ26A
44 boardsBoards in 35 GitHub repositories, designed in KiCad, that use the SMBJ26A by MDD (-65℃~+150℃ 14.3A 1uA 26V 31.9V 42.1V 600W@10/1000us TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHS). See how each wires it, with its parts, size, README and files; the SMBJ26A’s symbol, footprint and pinout are on its own page.
- 6 layers100 × 120 mm
Astra piNas
jlcjak/astra_piNas
Six-layer CM5 Lite dual-NVMe carrier with PCIe switch, Ethernet, microSD, USB-C PD and PoE. Review design; fabrication hold documented.
176 parts30 - 4 layers250.4 × 131 mm
Panel-16
geezacoleman/owl-driver-board
Development of a board that receives GPIO input and allows on/off control of connected solenoids.
939 parts14MIT - 4 layers55 × 35 mm
- 2 layers98.4 × 99.8 mm
RobotBipedo R14
Bastineitor73/Biped-Robot
Quieres ser parte de B1P0? Envía un correo a josespi@udec.cl, mariomedina@udec.cl, agarrido2018@udec.cl o ginostroza2020@udec.cl
147 parts6 - 2 layers45 × 80 mm
Bridge
lachlanhurst/dukki
Bipedal robot based on Microduck, rebuilt around Unitree J288 servos and a Radxa CM4.
72 parts2MIT - 2 layers58.1 × 45 mm
Toolset Hotswap Board
techy-robot/Meteoroid
Production-ready 3d printer based on a Ender 5 frame, with multifunction tool changing.
61 parts1 - 4 layers120 × 50 mm
- 6 layers157 × 73 mm
- 2 layers100 × 38 mm
Wled 2 digi 1 analog
DerNiccoo/WLED-PCB-Designs
Collection of my WLED PCB Controllers and Boards
54 parts - 2 layers96 × 76 mm
Wb2
falseywinchnet/hf-active-antennas
Open-hardware HF receive-antenna amplifiers: zero-flux loop amp, loop LNA, mini-whip. LTspice models, KiCad boards, JLCPCB packages. see license
167 parts - 2 layers100 × 102 mm
Esp32-c3-dip controller
haya1010/esp32-c3-safe-dip-led-controller
Protected ESP32-C3 2.54 mm DIP controller with USB-C and 3-channel 5/12/24 V LED PWM outputs
63 parts - 2 layers60 × 70 mm
- 2 layers102.5 × 71.1 mm
- 2 layers160 × 110 mm
Lipo Discharger
Lnotti/5-Channel-High-Current-Li-po-Discharger
A PCB designed to discharge 6S LiHV battery packs to storage voltage (3.8V per cell / 22.8V total) across up to 5 independent channels simultaneously.
122 parts - 4 layers66 × 58.5 mm
FOC Driver
Loredati-svg/BLDC-FOC-Motor-Driver
Single-motor BLDC/PMSM FOC driver: STM32G431 + DRV8323RH, 4-layer round PCB with on-board MA730 magnetic encoder. Motor block for a self-balancing robot. Designed in KiCad 10.
96 parts - 4 layers
Ceilingpuck v3 final v0-2
nate922/ceilingpuck_v4
Ceiling Puck v4 - smart ceiling sensor/actuator
115 parts - 2 layers114 × 135.2 mm
Kicker LT3751 OxeBots
OxeBots/ssl_electronics
Oxebots electronics design for the RoboCup Soccer Small-Size League
126 partsGPL-3.0 - 2 layers43.8 × 57.5 mm
- 4 layers94 × 78 mm
Ufluidics
pyshrekek/ufluidics
Firmware for an Elegoo Mega 2560 R3 driving five NEMA17 syringe pumps on a microfluidic device.
86 parts - 4 layers40 × 40 mm
Snowboard fc
RotemCarr/snowboard-fc
Snowboard flight controller hardware and software stacks - using the Zephyr framework
103 parts - 4 layers42 × 42 mm
Nema 17 stepper driver
Sarwan1494/Sarwan1494.github.io
Plain HTML / CSS / JS, no build step, no framework, no dependencies except KiCanvas (loaded from kicanvas.org via on the project pages) for the in-browser KiCad viewer.
75 parts - 4 layers36 × 36 mm
SATVIK-26
SavvySatvikCodes/SATVIK-26
Stabilized Autonomous Telemetry Vehicle Intelligent Kopter | Autonomous drone from scratch for delivery/filming
80 parts - 4 layers100 × 60 mm
Cyd obd adapter
ssjrocks/cyd-obd-adapter
Open low-level OBD-II adapter: ESP32 with HS-CAN, single-wire CAN, flex CAN, 2x K-line, L-line and pin voltage probes, exposed over BT Classic, BLE, WiFi and USB as a raw proxy. KiCad 10, JLCPCB-ready.
170 partsAGPL-3.0