Skip to the content

Boards using the SN75176BDRG

21 boards

Boards in 12 GitHub repositories, designed in KiCad, that use the SN75176BDRG by HANSCHIP semiconductor (SOP-8 RS-485 / RS-422 ICs ROHS). See how each wires it, with its parts, size, README and files; the SN75176BDRG’s symbol, footprint and pinout are on its own page.

  • 4 layers105 × 55 mmMotorKit, the printed circuit board in 3D

    MotorKit

    zhbi98/ODriveX

    【无刷电机FOC驱动器】双通道 FOC 无刷电机驱动套件,最高电压 60V 单通道电流可达 100A,可以驱动 1.2kW 以内 BLDC 或 PMSM(有中文注释)。

    184 parts22MIT
  • 2 layers98.9 × 91.4 mmCoin Cell Tester, the printed circuit board in 3D

    Coin Cell Tester

    tomrodinger/servomotor

    Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.

    204 parts17MIT
  • 4 layers42 × 42 mmMotor42, the printed circuit board in 3D

    Motor42

    zhbi98/Motor42

    【小型 42mm 伺服电机】支持 RS485 和 CAN 协议的闭环功能的步进电机,支持功率和通信级联(节点串联连接),适用于 3D 打印机,舵机,小型机械臂

    89 parts8MIT
  • 2 layers68 × 87 mmRS485USB, the printed circuit board in 3D

    RS485USB

    jirihusak/majordomus

    Open source system for smart home

    121 parts4GPL-3.0
  • 2 layers86.4 × 97.2 mmArm Control Board, the printed circuit board in 3D

    Arm Control Board

    ISU-MAVRIC/MAVRIC_Arm

    MAVRIC arm control board and firmware

    118 parts1
  • 2 layers102.4 × 98.6 mmMAVRIC Main, the printed circuit board in 3D

    MAVRIC Main

    ISU-MAVRIC/MAVRIC_Main

    Hardware and firmware for MAVRIC's main control system

    66 parts1
  • 4 layers408.7 × 50 mmPartial Drawer Controller v1, the printed circuit board in 3D

    Partial Drawer Controller v1

    Robast-GmbH/PCB_Designs

    This repository contains all the necessary files and instructions for the PCBs that are designed using KiCad. Here is an overview of the main components: - .github: Contains Github-specific configurations, including…

    619 parts1MIT
  • 2 layers70 × 23 mmDMX Adapter small V3, the printed circuit board in 3D

    DMX Adapter small V3

    a6c0424fa083/LightController_PCB

    This is the PCB (designed in KiCad) used in the LightController software

    45 partsMIT
  • 2 layers65 × 80 mmLAM-4I4O REVC, the printed circuit board in 3D

    LAM-4I4O REVC

    b4ck5p4c3/lambium

    🏭 Series of weird space automation devices

    68 partsCERN-OHL-S-2.0
  • 4 layers90.8 × 58.8 mmHALSER, the printed circuit board in 3D

    HALSER

    hatlabs/HALSER-hardware

    Hat Labs Serial Interface Device hardware design files

    199 partsCC-BY-4.0
  • 2 layers46.7 × 87.5 mmServo motor, the printed circuit board in 3D

    Servo motor

    tomrodinger/servomotor

    Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.

    112 parts17MIT
  • 2 layers39 × 56.4 mmServo motor, the printed circuit board in 3D

    Servo motor

    tomrodinger/servomotor

    Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.

    104 parts17MIT
  • 2 layers58.2 × 64 mmRoomIO 001, the printed circuit board in 3D

    RoomIO 001

    jirihusak/majordomus

    Open source system for smart home

    83 parts4GPL-3.0
  • 2 layers58.2 × 64 mmRoomSensor 001 MCU, the printed circuit board in 3D

    RoomSensor 001 MCU

    jirihusak/majordomus

    Open source system for smart home

    84 parts4GPL-3.0
  • 4 layers155 × 52 mmDrawer Controller, the printed circuit board in 3D

    Drawer Controller

    Robast-GmbH/PCB_Designs

    This repository contains all the necessary files and instructions for the PCBs that are designed using KiCad. Here is an overview of the main components: - .github: Contains Github-specific configurations, including…

    198 parts1MIT
  • 4 layers118 × 47 mmDrawer Controller v4 hotfix, the printed circuit board in 3D

    Drawer Controller v4 hotfix

    Robast-GmbH/PCB_Designs

    This repository contains all the necessary files and instructions for the PCBs that are designed using KiCad. Here is an overview of the main components: - .github: Contains Github-specific configurations, including…

    143 parts1MIT
  • 2 layers83 × 62 mmLam-4i4o, the printed circuit board in 3D

    Lam-4i4o

    b4ck5p4c3/lambium

    🏭 Series of weird space automation devices

    50 partsCERN-OHL-S-2.0
  • 2 layers53 × 80 mmLAM MEW G3, the printed circuit board in 3D

    LAM MEW G3

    b4ck5p4c3/lambium

    🏭 Series of weird space automation devices

    61 partsCERN-OHL-S-2.0