Skip to the content
PCBKitNew board

Boards using the BC557

172 boards

Boards in 144 GitHub repositories, designed in KiCad, that use the BC557 by DDF (1 PNP 100mA 100nA 150MHz 45V 500mW 6V 800 90mV、250mV PNP TO-92 Bipolar (BJT) ROHS). See how each wires it, with its parts, size, README and files; the BC557’s symbol, footprint and pinout are on its own page.

  • 2 layers56 × 65 mmSeaTalk1, the printed circuit board in 3D

    SeaTalk1

    dotnet/iot

    This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.

    24 parts2.4kMIT
  • 2 layers178 × 145 mmUltra DB X51 v1, the printed circuit board in 3D

    Ultra DB X51 v1

    ExploreEmbedded/8051_DevelopmentBoard

    Design files and sample code for 8051 development Ultra Boards

    145 parts70
  • 2 layers148.8 × 132.2 mmUsbflashprog, the printed circuit board in 3D

    Usbflashprog

    robsonsmartins/usbflashprog

    A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.

    125 parts36
  • 2 layers47 × 25 mmMonotron cv adapter, the printed circuit board in 3D

    Monotron cv adapter

    matthewcieplak/monotron-cv-adapter

    A eurorack control voltage to Korg Monotron CV adapter board.

    8 parts35
  • 2 layers83.8 × 72.4 mmVoice board, the printed circuit board in 3D

    Voice board

    Windfisch/analog-synth

    A low-cost semimodular analog synthesizer

    131 parts31GPL-3.0
  • 2 layers13 × 0.5 mmKamstrup, the printed circuit board in 3D

    Kamstrup

    Hal9k-dk/kamstrup

    Kamstrup IR-øje

    11 parts19
  • 2 layers167.8 × 200.6 mmRandom Jazz Generator, the printed circuit board in 3D

    Random Jazz Generator

    telec16/modular-synth

    Little side project, don't expect much updates.

    132 parts16
  • 2 layers60 × 55 mmEPS, the printed circuit board in 3D

    EPS

    AMSAT-EA/easat-2

    EASAT-2 satellite

    105 parts15
  • 2 layers99.9 × 99.9 mmIsa debug card, the printed circuit board in 3D

    Isa debug card

    maniekx86/isa_debug_post_card

    8-bit ISA debug and POST card

    85 parts13GPL-3.0
  • 2 layers100 × 100 mmWhiteBoy, the printed circuit board in 3D

    WhiteBoy

    nodep/NovaBox

    Circuit and PCB design of simple Bluetooth stereo receiver and amplifier

    111 parts11GPL-3.0
  • 2 layers213 × 130 mmMax48 ISSUE4, the printed circuit board in 3D

    Max48 ISSUE4

    alvaroalea/all-spectrum-clones

    Schematic of a 8bit computer, clone of Sinclair ZX Spectrum

    186 parts10
  • 2 layers53 × 55.1 mmLedclock sensor, the printed circuit board in 3D

    Ledclock sensor

    luk6xff/led-clock

    LED clock with some fancy features

    35 parts9MIT
  • 2 layers200 × 66 mmNixie control board, the printed circuit board in 3D

    Nixie control board

    shengwen-tw/nixie-clock

    IN-14 Russian nixie tube clock

    79 parts9MIT
  • 2 layers232.8 × 204.2 mmTIM-011B, the printed circuit board in 3D

    TIM-011B

    Board-Folk/TIM011B

    TIM-011 B Replica Board

    162 parts8
  • 2 layers135.8 × 128.4 mmMoog Filter, the printed circuit board in 3D

    Moog Filter

    jojo-monk/Yusynth-MiniMoog-Filter

    Eurorack adaptation

    78 parts8
  • 2 layers31.5 × 110.5 mmDiv, the printed circuit board in 3D

    Div

    moPsy-project/div

    Counter/Divider Eurorack Module

    74 parts8CC-BY-SA-4.0
  • 2 layers139.7 × 116.8 mmInverter F446, the printed circuit board in 3D

    Inverter F446

    Bausager/Downscaled_Inverters

    Downscaled three-phase half-bridge inverter

    111 parts7
  • 2 layers100 × 50 mmSincos interpolator, the printed circuit board in 3D

    Sincos interpolator

    finngineering/sincos_interpolator

    SinCos Interpolator to quadrature output

    61 parts5MIT
  • 2 layers26.9 × 59.8 mmTapecartFlasher, the printed circuit board in 3D

    TapecartFlasher

    hackup/TapecartFlasherNano

    Arduino Nano Shield for Flashing Tapecarts

    18 parts5
  • 2 layersCrossfield PCB Replacement, the printed circuit board in 3D

    Crossfield PCB Replacement

    jamesarbrown/Beolab-3500-Squeezebox

    Conversion of a Beolab3500 into a Logitech Media Server / Slimdevices Squeezebox using Raspberry Pi and PiCorePlayer

    30 parts5GPL-3.0
  • 2 layers302 × 135 mmModulo, the printed circuit board in 3D

    Modulo

    nodep/myAmp

    Battery powered, solid state, guitar amplifier schematic and PCB

    201 parts4GPL-3.0
  • 2 layers30.5 × 99.1 mmMinimoog, the printed circuit board in 3D

    Minimoog

    vk2gpu/eurorack-modules

    Collection of Eurorack module schematics

    74 parts4
  • 2 layers75.9 × 66 mmZx talker, the printed circuit board in 3D

    Zx talker

    zxinfo-diy-electronics/zx-talkman

    DIY Speech Interface for ZX Spectrum & ZX81 published in Ny Elektronik 1984 issue 10 page 36

    34 parts4
  • 2 layers127 × 127 mmShmample, the printed circuit board in 3D

    Shmample

    DIY-Nabra/shmample

    A rungling sample-and-hold sequencer

    185 parts3