Skip to the content

Boards using the BZT52C12S

7 boards

Boards in 7 GitHub repositories, designed in KiCad, that use the BZT52C12S by Jiangsu Changjing Electronics Technology (CJ) (1 Independent 100nA@8V 11.4V~12.7V 12V 150Ω 200mW 25Ω SOD-323 Zener Diodes ROHS). See how each wires it, with its parts, size, README and files; the BZT52C12S’s symbol, footprint and pinout are on its own page.

  • 4 layers70 × 60 mmCAN Logger V2.0, the printed circuit board in 3D

    CAN Logger V2.0

    deep-th/CAN_Logger

    This is a compact and reliable CAN logger board built for automotive and industrial applications. It features the ESP32-S3 microcontroller and MCP25625 CAN controller with integrated transceiver, supporting two…

    138 parts3
  • 2 layers45 × 80 mmBridge, the printed circuit board in 3D

    Bridge

    lachlanhurst/dukki

    Bipedal robot based on Microduck, rebuilt around Unitree J288 servos and a Radxa CM4.

    72 parts2MIT
  • 6 layers56 × 85 mmSunSproutHub, the printed circuit board in 3D

    SunSproutHub

    JohnNeville/SunSprout

    An esp32-c5 powered board that adds dual source battery charging, fuel management, and differential i2c bus. This was largely developed to be a complement with my other soil sensor project.

    142 partsCERN-OHL-S-2.0
  • 4 layers157 × 105 mmAbx motion, the printed circuit board in 3D

    Abx motion

    levdan159/abx-motion

    ABX-Motion 12V-32V ESP32-S3 4-Layer Robotics Controller (Dual 100W DC Servo H-Bridges, Dual Steppers, Dual Relays, CAN, RS-485, USB-C)

    203 parts
  • 2 layers33.5 × 17.1 mmTTLtoCANforTOF, the printed circuit board in 3D

    TTLtoCANforTOF

    QDU-Robomaster/TTLtoCAN

    电源部分通过 TPS54202 将输入电源降压至设计目标 5V,再由 ME6211 产生板上 3.3V。STM32 连接 ToF 的 UART,并通过 CAN 收发器接入总线。通信转换需要配套固件,当前仓库未提供固件及协议定义。

    44 parts
  • 4 layers106 × 110 mmRearCircuitBoard 10, the printed circuit board in 3D

    RearCircuitBoard 10

    ssbingo/samba-solar-track

    Samba Solar Track – Solarnachführung mit Sturmschutz: Handbuch, Platine und Gehäuse für den Nachbau (10,1-Zoll-Version)

    329 parts
  • 4 layers100 × 80 mmHubbish rev2, the printed circuit board in 3D

    Hubbish rev2

    karlp/hubbish

    Cascading, per port power switching usb2.0-HS 7 port hub

    130 parts3