Skip to the content
12

BZT52C12S

Jiangsu Changjing Electronics Technology (CJ)Extended

1 Independent 100nA@8V 11.4V~12.7V 12V 150Ω 200mW 25Ω SOD-323 Zener Diodes ROHS

Part id
cj/BZT52C12S
Category
Zener Diodes
Package
SOD-323
Pins
2
In stock
64,095 at JLCPCB (C14643)
Used on
7 open-source boards

Overview

The BZT52C12S is a zener Diode made by Jiangsu Changjing Electronics Technology (CJ) in a SOD-323 package with 2 pins. 1 Independent 100nA@8V 11.4V~12.7V 12V 150Ω 200mW 25Ω SOD-323 Zener Diodes ROHS.

PCBKit's library has its KiCad symbol (Device:D_Zener, from KiCad's library) and its footprint (Diode_SMD:D_SOD-323, from KiCad's library), ready for a KiCad board. 64,095 are in stock at JLCPCB (part C14643). 7 open-source boards in 7 repositories on GitHub use it.

Symbol

Device:D_ZenerFrom KiCad's library

Footprint

12
Diode_SMD:D_SOD-323From KiCad's library

From the datasheet

3
Forward voltage
900 mV · max at IF = 10 mA · p. 1
Junction to air (SOD-323)
625 K/W · junction to ambient, ceramic PCB · p. 1
Junction, hottest
150 °C · maximum junction temperature · p. 1

What it is and has

5
Construction
Planar die construction · p. 1
Package
SOD-323 · p. 1
Application
General purpose, medium current · p. 1
Assembly
Ideally suited for automated assembly processes · p. 1
Lead-free option
Available · p. 1

Specifications

10
ParameterConditionsAs printedPage
Forward Voltage (Note 2) VFIF = 10mA; short duration test pulsemax 0.9 V1
Power Dissipation(Note 1) PDDevice mounted on ceramic PCB: 7.6mm x 9.4mm x 0.87mm with pad areas 25mm2max 200 mW1
Thermal ResistanceIURP Junction to Ambient RθJASOD-323; device mounted on ceramic PCB: 7.6mm x 9.4mm x 0.87mm with pad areas 25mm2max 625 ℃/W1
-XQFWLRQTemperature Tjmax 150 ℃1
Storage Temperature Range TVWJLower bound is corrupted in supplied textmax 150 ℃1
Zener Voltage Range (Note 2) VZBZT52C12S; nominal 12 V; IZT = 5 mA; short duration test pulsemin 11.4 · max 12.7 V2
Maximum Zener Impedance ZZTBZT52C12S; IZT = 5 mA; f = 1kHzmax 25 Ω2
Maximum Zener Impedance ZZKBZT52C12S; IZK = 1.0 mA; f = 1kHzmax 150 Ω2
Maximum Reverse Current IRBZT52C12S; VR = 8.0 V; short duration test pulsemax 0.1 uA2
Typical Temperature CoefficientBZT52C12S; IZTC = 5 mA; typical coefficient rangemin 6 · max 10 mV/℃2

Open-source boards using it

7
  • 4 layers70 × 60 mmCAN Logger V2.0, the printed circuit board in 3D

    CAN Logger V2.0

    deep-th/CAN_Logger

    This is a compact and reliable CAN logger board built for automotive and industrial applications. It features the ESP32-S3 microcontroller and MCP25625 CAN controller with integrated transceiver, supporting two…

    138 parts3
  • 2 layers45 × 80 mmBridge, the printed circuit board in 3D

    Bridge

    lachlanhurst/dukki

    Bipedal robot based on Microduck, rebuilt around Unitree J288 servos and a Radxa CM4.

    72 parts2MIT
  • 6 layers56 × 85 mmSunSproutHub, the printed circuit board in 3D

    SunSproutHub

    JohnNeville/SunSprout

    An esp32-c5 powered board that adds dual source battery charging, fuel management, and differential i2c bus. This was largely developed to be a complement with my other soil sensor project.

    142 partsCERN-OHL-S-2.0
  • 4 layers157 × 105 mmAbx motion, the printed circuit board in 3D

    Abx motion

    levdan159/abx-motion

    ABX-Motion 12V-32V ESP32-S3 4-Layer Robotics Controller (Dual 100W DC Servo H-Bridges, Dual Steppers, Dual Relays, CAN, RS-485, USB-C)

    203 parts
  • 2 layers33.5 × 17.1 mmTTLtoCANforTOF, the printed circuit board in 3D

    TTLtoCANforTOF

    QDU-Robomaster/TTLtoCAN

    电源部分通过 TPS54202 将输入电源降压至设计目标 5V,再由 ME6211 产生板上 3.3V。STM32 连接 ToF 的 UART,并通过 CAN 收发器接入总线。通信转换需要配套固件,当前仓库未提供固件及协议定义。

    44 parts
  • 4 layers106 × 110 mmRearCircuitBoard 10, the printed circuit board in 3D

    RearCircuitBoard 10

    ssbingo/samba-solar-track

    Samba Solar Track – Solarnachführung mit Sturmschutz: Handbuch, Platine und Gehäuse für den Nachbau (10,1-Zoll-Version)

    329 parts
  • 4 layers100 × 80 mmHubbish rev2, the printed circuit board in 3D

    Hubbish rev2

    karlp/hubbish

    Cascading, per port power switching usb2.0-HS 7 port hub

    130 parts3

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the BZT52C12S?

Yes. The symbol is Device:D_Zener and the footprint Diode_SMD:D_SOD-323, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the BZT52C12S?

SOD-323, with 2 pins. Its footprint is drawn on this page.

Where is the BZT52C12S datasheet?

Jiangsu Changjing Electronics Technology (CJ) publishes it: the Datasheet link on this page opens it.

Where can I order the BZT52C12S?

JLCPCB lists it as part C14643, with 64,095 in stock; the sellers' links on this page open their listings.

What can replace the BZT52C12S?

Parts like it in the library: the BZT52C12S by hongjiacheng, the BZX384-C12 by Nexperia, the BZT52C12S by MDD and the BZX384-B12 by Nexperia. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the BZT52C12S?

7 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.