Skip to the content

Boards using the AOD4185

44 boards

Boards in 37 GitHub repositories, designed in KiCad, that use the AOD4185 by Alpha & Omega Semiconductor (-55℃~+175℃ 1 P-Channel 15mΩ@10V 190pF 2.55nF 280pF 3V 40A 40V 55nC@10V 62.5W P-Channel TO-252(DPAK) MOSFETs ROHS). See how each wires it, with its parts, size, README and files; the AOD4185’s symbol, footprint and pinout are on its own page.

  • 4 layers100 × 100 mmPi TX 35W PA V2, the printed circuit board in 3D

    Pi TX 35W PA V2

    M0LTE/pi-transceiver

    An attempt to build a complete ham radio transceiver around a Raspberry Pi

    185 parts15
  • 4 layers65.9 × 52.7 mmMotor shield, the printed circuit board in 3D

    Motor shield

    DCC-EX/EX-Hardware

    Open Source hardware projects developed by the DCC-EX Team

    123 parts7CERN-OHL-W-2.0
  • 2 layers101.6 × 76.2 mmCameraBoard, the printed circuit board in 3D

    CameraBoard

    psas/lv3.1-avionics

    Avionics for the LV3.1 rocket

    68 parts5GPL-3.0
  • 2 layers216 × 164 mmMPPT Li Ion CN3791 charger board panel, the printed circuit board in 3D

    MPPT Li Ion CN3791 charger board panel

    SolderedElectronics/MPPT-Li-Ion-CN3791-charger-board-hardware-design

    Hardware design, BOM, gerbers and 3D files for MPPT-Li-Ion-CN3791-charger-board designed by Soldered Electronics.

    988 parts5
  • 4 layers100 × 30 mmRevo main, the printed circuit board in 3D

    Revo main

    ratmuds/revo

    a "cheap" 6 DoF robot arm intentionally pushing the limits of low quality hobby servos

    58 parts2MIT
  • 4 layers81 × 90.3 mmMildly Overkill, the printed circuit board in 3D

    Mildly Overkill

    hackepeter101/Mildly-Overkill

    todo.md was written entirely by AI. It's the list of everything it found. I read the suggestions, double-check them, and then fix them myself in KiCad, usually while muttering.

    138 parts1
  • 4 layers85.8 × 69.8 mmInternetDrone, the printed circuit board in 3D

    InternetDrone

    Stefanos0710/Odonata

    A fully autonomous drone for precise indoor navigation and worldwide remote control.

    47 parts1MIT
  • 4 layers100 × 50 mmDcesc ga25, the printed circuit board in 3D

    Dcesc ga25

    baden/roboarm

    Так, це роборука.

    219 parts
  • 2 layers290 × 280 mmCm5-guard A, the printed circuit board in 3D

    Cm5-guard A

    Brico-Hams/antenaSatCommrotor

    DUPLEXER 145 / 435 MHz — BNC — 25 W TARGET — REV A

    158 parts
  • 4 layers100 × 60 mmPocKETlab, the printed circuit board in 3D

    PocKETlab

    bublinak/PocKETlab

    127 partsMIT
  • 4 layers96 × 125.6 mmPowerDistributionPCB, the printed circuit board in 3D

    PowerDistributionPCB

    CUSail-Navigation/PCB-FA25-SP26

    This is a repository containing the PCBs designed during the FA25-SP26 academic year. Due to high compatibility and relative ease of use, all of these files are made with KiCad.

    93 parts
  • 2 layers121.6 × 68.2 mmClass D, the printed circuit board in 3D

    Class D

    dimitris-chatzoulis/half-bridge-class-d-amp

    Educational LTspice/KiCad half-bridge Class-D audio amplifier.

    59 parts
  • 4 layers100 × 80 mmPd brick, the printed circuit board in 3D

    Pd brick

    enkhbold470/pd-brick

    USB-C Power Delivery bench supply: STUSB4500 sink, LM5176 buck-boost, INA228 monitor, 1.2-22 V set over I2C by an ESP32-S3. 4-layer KiCad 10 board.

    120 partsCERN-OHL-S-2.0
  • 2 layers95 × 140 mmRadio Kiosk v2c, the printed circuit board in 3D

    Radio Kiosk v2c

    Filip-Kin/frc-radio-kiosk

    Bench box that powers and configures FRC radios: dual-mode PoE (802.3at via LTC4279, passive 12 V via TPS26600), USB-C PD or DC in, 15.6 V out for the Toughbook, 4x CR123A backup, STM32F072 firmware.

    239 parts
  • 4 layers108.8 × 66 mmSolar pasteurization controller, the printed circuit board in 3D

    Solar pasteurization controller

    Global-Health-Engineering/mzuzu-biogas-research

    This repository contains the engineering files, firmware, and analysis scripts for a solar-powered sludge pasteurization system deployed in Mzuzu, Malawi.

    91 partsMIT
  • 2 layers60 × 60 mmWater level esp8266-esphome solar charing, the printed circuit board in 3D

    Water level esp8266-esphome solar charing

    Hidayatur-rahman/Solar-Water-Level-Monitor-ESP8266-ESPHome-

    A solar-powered water tank level monitoring system built around the ESP8266 (ESP-12E), designed in KiCad and running on ESPHome

    68 partsMIT
  • 4 layers90 × 75 mmARLISS STM32 2026, the printed circuit board in 3D

    ARLISS STM32 2026

    JosephPalacios-so/CANSAT_ARLISS_STM32

    121 parts
  • 2 layers180 × 50 mmEcu, the printed circuit board in 3D

    Ecu

    krzysztof9nowak/MiaCanFaker

    Emulate BMS on the bus of Mia Electric car

    162 parts
  • 4 layers86 × 90 mmSc02 drive, the printed circuit board in 3D

    Sc02 drive

    KVR-CIBER/sc02-solar-hypercar

    SC-02 Solar Hypercar: 3D-printbare Le-Mans-racer op zonne-energie met Pi 4 + ESP32-S3, CadQuery-CAD en three.js-simulatie

    94 parts
  • 4 layers80 × 60 mmLelamp board, the printed circuit board in 3D

    Lelamp board

    lewipewi/lelamp-board

    A 4-layer replacement power board for LeLamp, Human Computer Lab's open-source expressive robot lamp. One 12 V input, protection, and two independent 5 V rails — plus a level shifter that fixes an LED data link…

    68 parts
  • 2 layers64.9 × 76 mmSata psu, the printed circuit board in 3D

    Sata psu

    mattibmt98/Sata-Multiplier-power-supply

    5-bay SATA drive power supply: single 12V brick in, five staggered 12V+5V outputs out. Passive analog spin-up sequencing, no MCU. KiCad 9 project generated from Python.

    112 parts
  • 2 layers100 × 100 mmCarrier, the printed circuit board in 3D

    Carrier

    moinsen-dev/open-bed-climate

    Open-source, local-first bed climate system: water-cooled/heated mat, standard parts, DIY kits, Home Assistant. Design phase.

    126 partsApache-2.0
  • 4 layers130 × 100 mmPropmesh, the printed circuit board in 3D

    Propmesh

    mrwillson2u/propmesh

    Open-source wireless control for Halloween and holiday props.

    265 partsGPL-3.0